elinchrom 211404 ONE Off Camera Flash User Guide

ONEQuick Start Guide

Setup Menu

Control panel / Touch Screen

Display panel – Dashboard

The colour of the Group corresponds to the group number : blue for group 1, yellow for group 2, red for group 3 and green for group 4.The Elinchrom logo on the side of the unit illuminates with the color of the selected group.

Modelling lamp

Screen Views

Work ScreenShows the most important settings, once the unit is configured. Displayed automatically after 45 sec of inactivity.Sub-menu ScreenSelect feature by scrolling.Swipe left or right to change the value between the arrows

 

Screen Lock

To activate the touch screen lock, press the Menu button, select the Setting wheel and go to Touch and select on / off

Connection

USB-C ChargerUse only the original Elinchrom One USB Charger to recharge the built-in Li-Ion battery.When the unit is OFF the side logo color shows the charge status:Red: rechargingOrange: almost chargedGreen: the unit is chargedRecharging time: 100 min. to 100%Battery capacity min./max power: 9700 / 725 flashes per charged battery.

Reset To Default SettingsSwitch the unit on, and release the ON button.When the EL Logo appears press immediately the “ON” and “Menu” button for 4 seconds until the display shows “Reload all default parameters”.

www.elinchrom.comElinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLANDQSG ONE – 09.2021Av. de Longemalle 11, CH-1020 Renens, Switzerland,Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81 E-mail: [email protected]

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by