Sensi Touch Smart Thermostat 1F95U-42WF Installation Manual

Installation Manual

Sensi Touch Smart Thermostat 1F95U-42WF

Overview

Home comfort control – Anytime. Anywhere.
Customizable HD color touchscreen
Distinct, clean design with a bold lens to fit the modern home
Intuitive app and hardware design – validated by research
Flexibility to select options and programs that fit your lifestyle

Features

Available in White or Black
Color touch screen with unmatched clarity and usability
Remote app control
Geofencing smart feature and flexible scheduling options for energy savings
High/Low temperature text alerts
Extensive compatibility: heat, cool, heat pump, dual fuel
Popular smart home platform integrations – Amazon Alexa, Google Assistant, Apple HomeKit, SmartThings and Wink
Back glow with custom setting options
Multi thermostat control capable for light commercial applications
Auto changeover
Humidity control

Easy install. Designed with you in mind.

Key Features

Terminal lights for increased visibility while wiring
Easy-click terminals eliminating the need for a screwdriver
Large, easy-to-read terminal labels on the back plate
Built-in level for picture-perfect mounting
Size that covers the existing footprint of most thermostats.

Sensi Smart Thermostat Comparison

Compatibility and common wire (c-wire) requirement

Common wire is required for

Conventional heating and cooling systems
Heat only or Cool only applications
Heat pumps

Not compatible with

Millivolt systems
External 24 VAC transformer is an option.
Communicating systems
Line voltage systems

Terminal outputs and common wire (c-wire) requirement

The common wire could be labeled “C”, “B” or “X” on the old thermostat. Please refer to the owner’s manual of the old thermostat.

What if I don’t have a common wire (c-wire)?

There are a few options if the application does not have or will not allow the pulling of a common wire (c-wire) through the wall.

Look for an unused wire in the thermostat cable bundle– Video: Using an extra, unused wire as a common wire
Use the “G” (Fan wire)– Video: Using a g-wire (fan wire) as a common wire
Install an Emerson Thermostat Common Wire Kit– Video: Using an Emerson Thermostat Common Wire Kit

Do I need a RC/RH jumper?

No jumpers required

Sensi Touch Smart Thermostat has a built in RC/RH jumper, no need to field install a jumper
If you have separate wires to RC and RH terminals (two transformer systems)– Label the wires RC and RH separately and then clip the jumper wire on the Sensi back plate.

RC/RH jumper location

RC/RH jumper built-in on the back of the thermostat

No jumpers are required when installing the Sensi Touch Smart Thermostat.

Wiring – two transformer – conventional single stage or two stage systems

Quick tip: Thermostat wiring does not follow a standardized color code. Take a picture with your smart phone and label thermostat wires before removing old thermostat from the wall.

Wiring – heat pumps single stage or multi-stage systems

Quick tip: Thermostat wiring does not follow a standardized color code. Take a picture with your smart phone and label thermostat wires before removing old thermostat from the wall.

Heat pump wiring exceptions

Separate W2 and E Wires

Both wires will be labeled W/E and attached to the same terminal.

B. Terminal Wires

“B” terminal can be used for more than one. Here is the solution to cross.– If there is a wire on the “O” terminal, label the B wire C– If there is no wire on the “O” terminal, label the B wire O/B

System configuration and system type setup

Sleep Mode
Backglow
Home Screen Content
Schedule
Wi-Fi
About Thermostat
Advanced Setup
Setup HVAC
Fan Mode Options
Humidify
Dehumidify

Once configured, Sensi Touch Wi-Fi Thermostat operates like traditional thermostat until it is connected to Wi-Fi via a smartphone.

System Compatibility List – Humidity Control

Heat only: Humidifier only
Cool only: Dehumidifier only
1 stage heat, 1 stage cool: Humidifier and Dehumidifier
1 stage heat, 2 stage cool: Dehumidifier only*
2 stage heat, 1 stage cool: Humidifier only*
2 stage heat, 2 stage cool: None*

Note: if the staging on a 2 stage heat or 2 stage cool system can be handled by the furnace/air handler board, that will open up the Y2 or W2 terminal for hum/dehum use.

How to Set Up Humidity Control on the Sensi Thermostat

Installation

Install humidifier/dehumidifier equipment– Wire the whole-house humidifier to the Y2/* terminal– Wire the whole-house or standalone dehumidifier to the W2/* terminal
On Sensi Touch, go to Advanced Setup in the menu and select Additional Accessories
Depending on installed equipment, select appropriate configuration

Connecting to Wi-Fi in simple

Connect with your customers – Anytime. Anywhere.

Register your company at www.SensiRegistration.com– Upload your logo which will be displayed in your customer’s phone
During installation, enter your registered phone number in the Sensi app– The Sensi app stores your contact information in your customer’s phone.
When your customer needs service, you’re just a tap away.– Also, if your customer receives a smart alert due to a system issue, your contact information will be included