Energizer 47609 Remote Control Puck Lights User Guide
BATTERY INSTALLATION
Puck: To open, twist back cover of puck light counterclockwise and remove. Insert 3 AAA batteries per puck (noting polarity). To close, replace cover and twist clockwise.
IMPORTANT: Different types of batteries or new and used batteries should not be mixed. Exhausted batteries should be removed from the fixture and disposed of properly.
Remote: To replace exhausted battery, remove the screw and battery cover, on the back of the remote. Insert 1 CR2032 battery, noting polarity. Replace the cover and screw.
Note: Remove battery isolation tab before first time use.
MOUNTING INSTRUCTIONS:
- Remove battery cover and use preinstalled double-sided tape to mount in desired location.Note: For a more permanent installation, screw through the two holes using counter sunk screws.Note: Ensure one of the two wireless icons (
) remains unobstructed and facing desired direction for remote to reach interior sensor. The remote will work better with direct line of sight access to the wireless icons ( ). - Reattach light to mounted battery cover by aligning tabs and twisting clockwise.Note: Battery door may remain mounted when changing batteries.
REMOTE OPERATION:
- On the remote, press the ON button to turn the lights on, or press the OFF button to turn them off.
- Use the + and – buttons to brighten or dim the lights.
- The 10%, 40%, 80% and 100% buttons allow you to go directly to your desired output level
- The 10min, 30min, 60min and 120min buttons automatically turn the lights off after the number of minutes indicated on the button.
Note: When using the remote, point directly at the puck for proper connection.
MANUAL OPERATION:
- First press: turns the light on
- Second press: turns light off
Functional range may be adversely affected by one or more of the following factors: weather, radio frequency interference, low battery or obstructions between the transmitter and receiver.
Read instructions or watch easy-to-follow video. Scan QR code or visit http://bit.ly/2TQmUgG
MADE IN CHINA
©2020 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by Jasco Products Company, LLC. All other brand names are trademarks of their respective owners.
Neither Jasco Products Company, LLC nor Energizer Brands, LLC is affiliated with the respective owners of their trademarks.
Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM CST.
90-day warranty. Visit www.byjasco.com for warranty details.
References
[xyz-ips snippet=”download-snippet”]