ENERMAX FAN UCTB8/9/12/14 Installation Guide
The Package Includes:
- T.B. Silence Fan x 1
- Screws x 4
- Pin to 4 adaptor x 1
Installation
- PC Power off at all times during installation.
- Please see the right figure for the airflow directions.
- Install the fan on the case with the 4 screws.
- Connect the 3 pin connector to a specific 3 pin 12V header on the motherboard OR attached the enclosed 3 pin to 4 pin adaptor to your power supply.
Detaching fan blades:
Carefully push out the fan blades with your thumbs in the inner area.
Reattaching the fan blades:
Press the center of the blades towards the frame until it clicks.
- Put the blades back into the frame gently.
- Turn around the fan and put it onto a table.
- Press the center of the frame towards the table until it clicks.
[xyz-ips snippet=”download-snippet”]