ENFORCER 3 /8? Concealed-Mount Contacts SM-207Q User Manual

ENFORCER 3 /8ʺ Concealed-Mount Contacts SM-207Q

Features

  • Used for protecting sliding doors and windows where space is limited
  • 3/8″ (10mm) Press-fit mount
  • 15″ (38cm) Wire leads
  • Contact reed switch is SPST, deactivated rhodium on gold underplating for a longer expected life
  • Unique glue/epoxy compound protects reed switch
  • For closed loop circuits
  • 1″ (25mm) Gap
  • Lifetime limited warranty

Parts List

  • 10x Contact switches
  • 10x Magnets
  • 1x Manual

Specifications

Model SM-207Q/W SM-207Q/BR
Loop type Closed loop
Electrical connection N.O. (SPST)
Operation gap 1″ (25mm)
Connectors 15″ (38cm) Leads
Housing color White Brown
Material Switch High-impact ABS plastic / epoxy compound
Contacts Deactivated rhodium on gold underplating
Contact rating (max.)
10W (max.)
Operating temperature -15°~160° F (-25°~70° C)
Switch cycles 50 Million ()
Dimensions Switch 13/8″ xø7/16″ (35xø11 mm)
Magnet 13/8″ xø7/16″ (35xø11 mm)
Magnet type Alnico 5

Overview

Installation

Please read the manual carefully before you begin the installation.

  1. Mount the contact above the door or window in the frame. For doors, ensure that the mounting is farthest from the hinged side of the door.
  2. Connect the two wires to the alarm control panel.
  3. Mount the magnet in the door/window so that it will face the contact. Be sure that the gap between the contact and magnet does not exceed 1″ (25mm).

California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

LIMITED LIFETIME WARRANTY:

This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the lifetime of the product. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. Under no circumstances will SECO-LARM be responsible for any costs or charges for removal, installation, or reinstallation. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to repair or replacement only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else. This lifetime limited warranty is for products sold and installed in the United States and Canada. For all other countries the warranty is 1 (one) year.

NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2021 SECO-LARM U.S.A., Inc. All rights reserved.Website: www.seco-larm.comPhone: (949) 261-2999 | (800) 662-0800Email: [email protected]

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by