EF-100WATV, EF-100BATV User Manual

User Manual

EF-100WATV, EF-100BATV

IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.

Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface. See the online User’s Guide for more information.

Connect the projector

Streaming device

Connect the included Android TV streaming device to your projector. To stream content, make sure you have an active streaming account and enter your login information as necessary for each app.

Note: To connect other streaming devices, see the online User’s Guide for more information. The projector’s HDMI port does not support MHL®.

Remove the rear cover of the projector

2. Open the USB power cable clamp.

3. Connect the streaming device to the projector’s HDMI extension cable.

4. Connect the USB power cable to the streaming device and fit the device securely inside the projector.

Caution: Do not force the device into the projector; you may damage the projector and/or the device.

5. Make sure the device is securely connected as shown below. Pass the USB power cable through the clamp, then close the clamp to secure the cable.

6. Replace the rear cover of the projector.

Note: To pair a Bluetooth® speaker or to connect an external speaker or headphones to your projector, see the online User’s Guide.

External video source

You can connect an external video source with an HDMI cable (not included).

Caution: Do not turn on the video source before connecting it to the projector; you may damage the projector.

Note: Some external video sources may require an optional HDMI adapter cable.

Remove the rear cover of the projector.

2. Connect an HDMI cable to your video source’s HDMI output port.3. Connect the other end of the HDMI cable to the projector’s HDMI extension cable.

4. Pass the HDMI cable through the cable path as shown.5. Replace the rear cover of the projector

Turn on the projector

Adjust the image

Move the focus lever on top of the projector left or right to adjust the image sharpness

2. To adjust the image height, press and hold the foot release lever on the bottom of the projector to extend the front adjustable foot. Release the lever to lock the foot in the desired position.

Using the projector remote control

Install the batteries as shown (two AAA batteries).

Note:

You must pair the projector remote control to the projector to use Android TV and video-on-demand features. See the online User’s Guide for more information.
The remote control for Android TV is only used to control the streaming device if it is connected to a different device or projector. See the online User’s Guide for more information.

Troubleshooting

Registration

Where to get help

ManualFor more information about using the projector, you can view or download the online manual from the Epson website, as described below.

Internet supportVisit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Telephone support servicesTo use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User’s Guide.

You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).

Notices

Wireless product safety instructions

Contains Bluetooth module model: DBUB-E207 Streaming Media Player model: STI6110-D101(RoHS) Remote controller model: WH-55, WH-5674

This document provides safety instructions and describes the specifications. Read this document carefully before use to ensure your safety and product performance.

This device is restricted to indoor operations only.

WARNING:

This product may exert electromagnetic interference on, and cause malfunction of, cardiac pacemakers. Before using this product, check that there is no one in the vicinity using a cardiac pacemaker.
This product may exert electromagnetic interference on, and cause malfunction of, sensitive medical equipment. Before using this product, check that there is no sensitive medical equipment in the vicinity.
Do not use the wireless communication function near automatically controlled devices such as automatic doors or fire alarms. The electromagnetic waves may cause electromagnetic interference with equipment or cause the equipment to malfunction.

Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure.

U.S. FCC Notices

Contains FCC ID: BKMAE-E207FCC ID: BKMAE-STI6110FCC ID: BKMAE-WH55FCC ID: BKMAE-WH5674

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which by turning the equipment of and on the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated with a distance of at least 7.9 inches (20 cm) between the radiator and your body (except for the Bluetooth remote controller model WH-55 or WH-5674).

Industry Canada (IC) Notices

Contains IC: 1052D-E207IC: 1052D-STI6110IC: 1052D-WH55IC: 1052D-WH5674CAN ICES-3 (B)/NMB-3 (B)

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated with a distance of at least 7.9 inches (20 cm) between the radiator and your body (except for the Bluetooth remote controller model WH-55 or WH-5674).

Supplier’s Declaration of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:

We: Epson America, Inc.Located at: 3840 Kilroy Airport Way MS: 3-13Long Beach, CA 90806Telephone: (562) 981-3840

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.906. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: EpsonType of Product: LCD ProjectorModel: H914AMarketing Name: EF-100WATV/EF-100BATVOptions: Remote controller (Model 2192767xx [x=0-9])

Epson America, Inc. Limited Warranty

Two-Year or 8,400-hour Projector Limited Warranty

A. What Is Covered: Epson America, Inc. (“Epson”) warrants to the purchaser of the Epson projector product enclosed with this limited warranty statement that the product, if purchased and operated in the United States, Canada, or Puerto Rico, will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase or 8,400 hours of use, whichever occurs first.
B. What Epson Will Do To Correct Problems: Should your product prove defective during the limited warranty period, please call Epson at the number at the end of this limited warranty. This line will be answered during Epson’s regular support hours (currently 6:00 am to 8:00 pm, Pacific Time, Monday through Friday, and 7:00 am to 4:00 pm on Saturday – subject to change). When you call, please be prepared to provide the service technician with proof of purchase information including the unit serial number and original date of purchase. You may also need to provide proof of purchase if warranty coverage cannot be verified by the serial number. If Epson confirms warranty service is required, Epson will, at its option, repair or replace the defective unit, without charge for parts or labor. If Epson authorizes an exchange for the defective unit, Epson will ship a replacement product to you, freight prepaid, so long as you use an address in the United States, Canada, or Puerto Rico. You are responsible for securely packaging the defective unit and returning it to Epson within five (5) working days of receipt of the replacement. Epson requires a debit or a credit card number to secure the cost of the replacement product in the event you fail to return the defective one. If Epson authorizes repair instead of exchange, Epson will direct you to send your product to Epson or its authorized service center, where the product will be repaired and sent back to you. You are responsible for packing the product and for all postage or shipping costs to and from the Epson authorized service center. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or refurbished to the Epson standard of quality. If service cannot be provided on the product for any reason and Epson no longer sells the same model, Epson will replace your product with a model of equal or superior value. Replacement products or parts assume the remaining warranty period of the product covered by this limited warranty and are subject to its 8,400-hour use limitation.
C. What This Warranty Does Not Cover:

Any damage caused by misuse, abuse, improper installation, neglect, improperpacking or shipping; disasters such as fire, flood, or lightning, improper electricalcurrents, software problems, or interaction with non-Epson products
Any damage caused by, or any service for, third-party software, applications, parts,components, or peripheral devices added to the product after its shipment fromEpson, such as dealer or user-added boards, components, or cables
Any damage caused by installing the product next to a heat source, or directly inthe path of an air vent or an air conditioner
Damage due to excessive, continual usage
Damage caused by failure to properly maintain the projector (see your onlineUser’s Guide for details)
Service when the projector is used outside the U.S., Canada, or Puerto Rico
Service if the product label, logo, rating label, or serial number has been removed
Loss of data
Installation or removal
Any damage from service performed by other than an Epson Authorized Servicer
Damage resulting from operation in areas with smoke, oil, high humidity, dust, orexcessive vibration
Cosmetic damage caused by handling or normal wear and tear during usage
Any product or parts purchased as used, refurbished, or reconditioned
Any damage caused by using improper packaging materials or improperpackaging and shipping when returning a product for repair or replacement. Youwill be invoiced for such shipping damage to product.

This warranty is not transferable. Epson is not responsible for your data or applications, which cannot be restored and should be backed up by you. Postage, insurance, or shipping costs incurred in presenting your Epson product for carry-in warranty service are your responsibility. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred.

D. DISCLAIMER OF WARRANTIES: EPSON’S SOLE AND EXCLUSIVE LIABILITY AND YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY SHALL BE LIMITED TO EITHER, AT EPSON’S OPTION, REPAIR OR REPLACEMENT AS SET FORTH ABOVE. THE WARRANTY AND REMEDY PROVIDED ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN,ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRMARE VOID. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED WARRANTIES LAST, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
E. EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANY LOST PROFITS, COST OF SUBSTITUTE EQUIPMENT, DOWNTIME,CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, OR INJURY TO PROPERTY,RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY KIND IN EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT. SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
F. Disputes, Arbitration, Governing Laws:

Both you and Epson agree that any controversy or claim arising out of or relating to Epson products or services or this agreement, shall be resolved by arbitration on an individual, non-class, non-representative basis, rather than in court. The arbitration shall be governed by the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration on a class or representative basis and under the rules set forth in this agreement.The arbitrator, and not any federal, state, or local court or agency shall have the exclusive authority to resolve any dispute relating to the interpretation,applicability, enforce ability, or formation, including but not limited to, any claim that all or any part is void or voidable. JAMS rules are available at http://www.jamsadr.com or by calling 1-800-352-5267. Disputes shall be resolved bya single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the selection of the arbitrator. If you wish, you may appear at the arbitration by phone. The arbitrator is bound by the terms of this agreement.
Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, youagree to try, for sixty (60) days, to resolve any dispute informally by contacting us at Please include your name, address and contact information, the facts giving rise to the dispute, and the relief requested.You agree to act in good faith to resolve the dispute, but if you and Epson do not reach a resolution within the sixty (60) days, you may commence an arbitration.
Opt-out. You may elect to opt-out (exclude yourself) from the final, binding,individual arbitration procedure and waiver of class and representative proceedings specified in this agreement by sending a written letter to Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way, Long Beach,CA 90806, within thirty (30) days of your purchase of the Epson products and/or services that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding individual arbitration procedure and waiver of class and representative proceedings specified in this Section F. In the event that you opt-out consistent with the procedure set forth above, all other terms shall continue to apply, including the requirement to provide notice prior to litigation.
There is no judge or jury in arbitration and your grounds for appeal are limited,however, the arbitrator is empowered to grant relief and award you the same damages as a court could, including declaratory or injunctive relief. Judgment on the arbitration may be entered in any court having jurisdiction.
Notwithstanding the foregoing, you may bring an individual action in a small claims court of your state or municipality if the action is within that court’s jurisdiction and is pending only in that court.
Notwithstanding the foregoing, we also both agree that you or we may bring suit in court to enjoin infringement or other misuse of trademark, patent infringement, copyright, or trade secret.
Any action must be brought within one (1) year of the expiration of the warranty.
If any provision in this Section F is found to be unenforceable, that provision shall be severed with the remainder of this agreement remaining in full force and effect. The foregoing shall not apply to the prohibition against class or representative actions. This means that if Section 9 (below) is found to be unenforceable, the entire Section 9 (but only Section 9) shall be null and void.
We each agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated, or representative action.
This Section F is governed by the Federal Arbitration Act.

G.Other Provisions:

Other Rights You May Have: This warranty gives you specific legal rights, andyou may also have other rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Warranties in Canada: In Canada, warranties include both warranties and conditions.
Governing Law: Except for any claims subject to arbitration pursuant to Section F,you and Epson agree that the law of the state where you reside shall govern.
Venue: Except for claims subject to arbitration pursuant to Section F, in the event of a dispute you and Epson both consent to the jurisdiction of your state of residence or, if none, then of the courts in Los Angeles County, California

To find the Epson Authorized Reseller nearest you, please visit www.epson.com in the U.S. or www.epson.ca in Canada.

To find the Epson Customer Care Center nearest you, please visitwww.epson.com/service center locator in the U.S. or www.epson.ca/service center locator in Canada.

To contact the Epson Connection SM, please call (800) 637-7661 or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.

EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logo mark of Seiko Epson Corporation.

Private Line is a registered trademark and Epson Connection is a service mark of Epson America, Inc.

Android TV is a trademark of Google LLC.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.