EAN. 3663602795148EMT18-Li-QCORIGINAL INSTRUCTIONS
Safety instructions
Product description
Assembly
Use
Care & maintenance
Guarantee
Declaration of Conformity
PRODUCT DESCRIPTION SAFETY INSTRUCTIONS
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.”
WORK AREA SAFETY
a. Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETYa. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.d. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
a. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.b. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.h. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate at which it was designed.b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.e. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control ”g. Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.h. Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
a. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.b. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.c. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.e. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.f. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause an explosion.g. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
SERVICE
a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.b. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
MULTI-TOOL SAFETY WARNINGS
a. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.b. Where possible, secure smaller workpieces to prevent them from moving under the tool.c. Do not force the tool; let the tool do the work at a reasonable speed. Overloading will occur if too much pressure is applied and the motor slows resulting in inefficient operating and possible damage to the motor.d. Only use application accessories in good condition. Do not use them if they are torn or worn.e. Do not touch the moving sanding sheet or blade.f. Do not treat the surface to be worked with solvent-containing fluids. Materials being heated by the scraping can cause toxic vapors to develop.g. Exercise extreme caution when handling the scraper accessory. The accessory is very sharp; the danger of injury.h. Keep your hands away from the cutting area. Do not reach under the material being cut.i. Ensure that you have removed foreign objects such as nails and screws from the workpiece before commencing sanding.j. Don’t use it for wet sanding. For dry sanding only.k. Do not continue to use worn, torn, or heavily clogged sanding sheets.l. Do not scrape wet or dampened materials (e.g. wallpaper) or on moist surfaces. Penetration of water into the machine increases the risk of an electric shock.
ADDITIONAL SAFETY WARNINGS FOR BATTERY
a. Do not connect the positive terminal and negative terminal of the battery to each other with any metal object (such as wire).b. Do not carry or store the battery together with necklaces, hairpins, or other metal objects.c. Do not pierce the battery with nails, strike the battery with a hammer, step on the battery, or otherwise subject it to strong impacts or shocks.d. Do not solder directly onto the battery.e. Do not expose the battery to water or saltwater or allow the battery to get wet.f. Do not disassemble or modify the battery.g. Do not place the battery in or near a fire, on stoves, or in other high-temperature locations. Do not place the battery in direct sunlight, or use or store the battery inside cars in hot weather.h. Do not place the battery in microwave ovens, high-pressure containers, or on induction cookware.i. If you intend to store a battery for a period without use then store the battery at room temperature (19°C to 25°C), charged to about 30 – 50% of capacity. When storing for very long periods boost charge the battery once per year to prevent over-discharge. The following information applies to professional users only but is good practice for all users:
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST
The updated Control of Substances Hazardous to Health Regulations 1st October 2012 now also targets to reduce the risks associated with silica, wood, and gypsum dust. Construction workers are one of the at-risk groups within this because of the dust that they breathe: silica dust is not just a nuisance; it is a real risk to your lungs!
Silica is a natural mineral present in large amounts in things like sand, sandstone, and granite. It is also commonly found in many construction materials such as concrete and mortar. The silica is broken into very fine dust (also known as Respirable Crystalline Silica or RCS) during many common tasks such as cutting, drilling, and grinding. Breathing in very fine particles of crystalline silica can lead to the development of Lung cancer Silicosis Chronic Obstructive Pulmonary Disorder/Chronic obstructive pulmonary disease (COPD) And breathing in fine particles of wood dust can lead to the development of Asthma. The risk of lung disease is linked to people who regularly breathe construction dust over a period of time, not on the odd occasion.
To protect the lung, the COSHH Regulations sets a limit on the amount of this dust that you can breathe (called a Workplace Exposure Limit or WEL) when averaged over a normal working day. These limits are not a large amount of dust: when compared to a penny it is tiny – like a small pinch of salt: This limit is the legal maximum; the most you can breathe after the right controls have been used.
HOW TO REDUCE THE AMOUNT OF DUST?
1. Reduce the amount of cutting by using the best sizes of building products. Use a less powerful tool e.g. a block cutter instead of an angle grinder.2. Using a different method of work altogether – e.g. using a nail gun to direct fasten cable trays instead of drilling holes first.3. Please always work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles and use the dust extraction facility at all times. For more information please see the HSE website: http://www.hse.gov.uk/construction or [PDF]
WARNING! Some dust particles created by power sanding, sawing, grinding, drill and other construction jobs contain chemicals are known to cause cancer, birth defects, or other reproductive harm. Some examples of these chemicals are:
- Lead from lead-based paints.
- Crystalline silica from bricks and cement and other masonry products.
- Arsenic and chromium from chemically treated timber.
- Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce hand-arm vibration syndrome injuries to power tool users. The directive requires power tool manufacturers and suppliers to provide indicative vibration test results to enable users to make informed decisions as to the period of time a power tool can be used safely on a daily basis and the choice of tool.
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL.The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration. Calculating the actual period of use can be difficult and the HSE website has further information. The declared vibration emission has been measured in accordance with EN62841-1, EN62841-2-4 and may be used to compare one tool with another tool. The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used depending on the following examples and other variations on how the tool is used:
- How the tool is used and the materials being cut or drilled.
- The tool is in good condition and well maintained.
- Use the correct accessories for the tool and ensure they are sharp and in good condition.
- The tightness of the grip on the handles.
- The tool is being used as intended by its design and these instructions.
WARNING! Identify safety measures to protect the operator that is based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
While working with this power tool, hand/arm vibrations occur. Adopt the correct working practices in order to reduce the exposure to vibration. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. Helping to minimize your vibration exposure risk. ALWAYS use sharp chisels, drills, and blades. Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate). Avoid using tools in temperatures of 10ºC or less. Plan your work schedule to spread any high vibration tool use across a number of days.
NOTE: The use of other tools will reduce the users’ total working period on this tool.
HEALTH SURVEILLANCE
All employees should be part of an employer’s health surveillance scheme to help identify any vibration-related diseases at an early stage, prevent disease progression and help employees stay at work.
RESIDUAL RISKS
Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product:
- Injuries and damage to property due to broken attachments or the sudden impact of hidden objects during use.
- The danger of injury and property damage caused by flying objects or poor power tool accessories.
PRODUCT DESCRIPTION
| 1. LED work light | 10. Accessory attachment plate |
| 2. Quick-release lever | 11. Flange bolt |
| 3. On/off switch | 12. Sanding pad |
| 4. Gripping surface | 13. Adaptor |
| 5. Battery pack release button | 14. Sanding sheet |
| 6. Power bar button | 15. Scraper |
| 7. Battery pack | 16. Plunge cut blade |
| 8. Air vents | 17. HCS semi-circle blade |
| 9. Speed dial |
01. TECHNICAL SPECIFICATIONS
| Tool | |
| Rated voltage: | 18V d.c. |
| Rated no load speed: | 11000-16000/min |
| Weight(without battery): | 1.1 kg |
| Battery | |
| Battery pack model: | EBAT18-Li-4 |
| Battery voltage: | 18V d.c. |
| Battery capacity | 4Ah |
| Battery cell: | Li-Ion 3.6V x 10pcs |
| Weight: | 0.7 kg |
Ambient temperature range for tool and battery use: -10°C to 40°CFor use with battery pack and charger as below:
| Battery pack model: | EBAT18-Li-2 / EBAT18-Li-4 / EBAT18-Li-5 |
| Charger model: | EC18-Li / EFC18-Li / EMC18-Li |
| NOISE DATA | |
| A weighted sound pressure: | LpA=78.4dB(A) |
| A weighted sound power: | LwA=89.4dB(A) |
| Uncertainty: | KPA & KWA=3.0dB(A) |
The noise for the operator may exceed 80 dB(A) and ear protection measures are necessary.
| VIBRATION DATA | |
| With sanding pad | ah= 4.2m/s² |
| Uncertainty | K=1.5m/s |
WARNING! The vibration and noise emissions during actual use of the power tool can differ from the declared values depending on the ways in which the tool is used especially what kind of workpiece is processed, and need to identify safety measures to protect the operator that is based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
RATING LABEL EXPLANATIONEMT18-Li-QC = MODEL NUMBERE = ERBAUERMT = MULTI TOOL18 = 18 V d.c.Li = LITHIUM IONQC = QUICK CHANGE
ASSEMBLY
01 SYMBOLS
Read the instruction manual
Wear eye protection
Wear hearing protection.
Wear a dust mask.
Do not dispose of battery packs in rivers or immerse in water.
Do not dispose of battery packs in the fire. They will explode and cause injury.
Do not expose battery packs to heat in excess of 40°C
For wood cutting
For soft metals cutting
Brushless motor
Keep Cool Battery Technology
Quick-Change Accessory Technology
Manufacturing date code: Year of manufacturing (20yy) and week of manufacturing (Wxx)
02 UNPACKING
Unpack all parts and lay them on a flat, stable surface.
- Remove all packing materials and shipping devices, if applicable.
- Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. Using an incomplete or damaged product represents a hazard to people and property.
- Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys! Children must not play with plastic bags, sheets and small parts! There is a danger of choking and suffocation!
03 ASSEMBLING THE MACHINE
CHARGING YOUR BATTERY PACKThe battery has been shipped in a low-charge condition. Charge it fully before first use. Refer to the charger instruction manual for the details.TO REMOVE OR INSTALL THE BATTERY PACK (A1, A2)Depress the battery pack release button to release and slide the battery pack out from your tool. After recharge, slide it back into your tool. A simple push and slight pressure will be sufficient.
BATTERY PACK POWER BARThe Li-Ion battery pack (7) is equipped with a POWER BAR which is used to give an indication of the battery pack’s remaining charge. Press the POWER BAR button (6) to check the battery charge as below. The LED will stay lit for approximately 5 seconds.
 |
76-100% Charge |  |
| 51-75% Charge |  |
|
| 26-50% Charge |  |
|
| 5-25% Charge |  |
|
| under 5% Charge |  |
SELECT THE ACCESSORY
| Accessory | For materials | Application | |
 |
HCS semi-circle blade | Wood, plastic, drywall, softmetals |  |
 |
Plunge cut blade(For wood) | Wood, plastic, drywall |  |
|
Plunge cut blade(For metal) | Wood, plastic, soft metals | |
 |
Scraper | Paint & varnish, bondedcarpet, soft adhesives, vinylflooring, wood and other floor coverings |  |
 |
Sanding Pad &Sanding Sheets | Bare or painted wood, plaster, and other materials |  |
 |
Adaptor for branded accessories |  |
SELECT THE SANDING SHEETINGSanding sheets are available with different grain sizes (grit), depending on the workpiece material and material removal.
| Grit | Type | Example of use |
| 60 or less | Very Coarse | Material removal, heavy paint removal, shaping wood |
| 80-100 | Coarse | Paint removal, rough surface preparation(e.g. non-planed wood) |
| 120 – 150 | Medium | Surface preparation planed wood |
| 180 – 220 | Fine | Sanding between coats |
| 240 or more | Very Fine | Final finishing |
ATTACHING THE ACCESSORIES (B1-B6)
WARNING! Always wear protective gloves when changing accessories. The edges of the application tools are sharp and can become very hot after working. Always disconnect the tool from the power source when assembling, making adjustments, or changing accessories.
Turn the quick-release lever (2) anticlockwise until to hear a “click” sound. Press and turn the flange bolt (11) 90° clockwise and pull out to remove it. Ensure that the accessory attachment plate (10) and the drive shaft are clean. Align the grooves on the suitable accessory with the ribs on the attachment plate. Put the accessory onto the attachment plate (10).
NOTE: The accessory attachment plate is magnetic and will hold ferrous accessories in the plate.
Insert and depress the flange bolt (11) until you hear a click indicating that the flange bolt (11) has engaged in the shaft. Press and turn the flange bolt (11) anticlockwise for 90°. Turn the quick-release lever (2) back to lock the driveshaft.
WARNING! Check that the accessories are correctly attached. Incorrect or insecurely fastened application tools can come loose during operation and cause a hazard.
NOTE: Attach the accessories at the desired orientation for the task at hand. The shaft is configured so that the accessory can be attached at 30° intervals around the shaft, from 0° to 330°.
ATTACHING SANDING SHEETS (C)Align the sanding sheet(14) with the sanding pad(12).Press the sheet firmly in place. To remove the sheet, simply pull it off If one point has become worn, peel off the sanding sheet, turn it 120° and attach again.USING ADAPTOR (D)
NOTE: The adaptor can be used to install branded accessories.
Put the “Adaptor” (13) on the accessory attachment plate. Place correct branded accessory on top of the adaptor. With your gloved hand holding the accessory, insert and depress the flange bolt (11) until you hear a click indicating that the accessory is secured. Press and turn the flange bolt (11) anticlockwise for 90°.
USE
01 INTENDED USE
This product is intended for sanding (not for plaster/drywalls) and scraping, as well as for cutting wood, plaster, plastics and soft (non-ferrous) metals, by using appropriate accessories. It should not be used for working on materials that are dangerous to health.
02 OPERATION
VARIABLE SPEED CONTROL (E)The variable speed feature of this tool enables the speed to be adjusted according to the accessory being used and material being cut, scraped or sanded. The speed dial (9) is numbered “1” to “6”, with position “1” being the lowest speed and position “6” being the highest speed.ON/OFF SWITCH (F)To turn the tool ON, push the on/off switch (3) forward. To turn it OFF, push the switch backward.LED WORK LIGHT (G)The LED work light (1) will automatically illuminate when you turn the tool ON and will turn off after you turn the tool OFF. This provides additional light on the surface of the workpiece for operation in lower light situations.
Sanding
WARNING! Do not continue to use the tool with a sanding sheet that is overworn or damaged.
Do not use the same sanding sheet for wood and metal.Metal particles become embedded in the sanding sheet and will scour a wooden surface. The removal rate and the sanding pattern are determined by the choice of sanding sheet and the work surface. Apply uniform sanding pressure to extend the life of the sanding sheets. Intensifying the sanding pressure does not lead to an increase of the sanding capacity, but instead, it increases wear on the machine and the sanding sheet. Use only the tip or an edge of the sanding sheet for precise sanding of edges, corners, and hard-to-reach areas. When selectively sanding on one spot, the sanding sheet can heat up considerably. Remove the tool from the surface periodically to permit the sanding sheet to cool down. A sanding sheet that has been used for metal should not be used for other materials. Use only original sanding accessories.
ScrapingThe tool is suitable for scrapping and removing surface coverings. For scraping, select a high-speed setting. To remove surface covers, place the scraping blade vertically on the workpiece. Switch the tool on and cut down through the covering. Place the tool at a flat angle (not over 20°) and apply a light forward pressure to remove the covering.
Plunge cut
WARNING! Only plunge cut in soft materials such as plaster or wood! Do not cut any hard materials such as steel and other ferrous metals!
This is suitable for cutting and plunge cuts, close to the edge sawing, sawing in corners, and confined spaces. Use appropriate blades. Mark the cutting line on the workpiece. Turn on the tool and use light pressure in the direction of plunging. Move the saw along the mark.
OVERLOAD, TEMPERATURE, AND CHARGING PROBLEM
| Problem | Tool/ Battery Status | Possible cause | Solution |
| Overload protection | Product suddenly Stops; The LED work light (if fitted) is flashing | Extremely high torque, binding and stalling situations, overloading of the tool | Relieve the load immediately, reset the tool by switching off and back on again |
| Temperature extremely high | The first and the third LED light of the POWER BAR will be flashing alternately | Battery temperature exceeds 77°C during operation | Cool down the battery to below 77°C for operation and below 57°C for charging |
| Low charge | Power for the tool will drop quickly; The first LED on the POWER BAR begins to flash | The battery pack is under 5% charge | Remove the battery pack from the tool and charge it |
| Other problems | Short charges | Not fully charged | Make sure that the battery is fully charged every time by allowing the charger to complete its full charging cycle |
| Poor storage condition |
Always remove the battery from the tool and charger when not in use and store in a dry secure place. Avoid charging or storing your battery in temperatures below 5°C and above 40°C. Cooldown a hot battery pack from a tool that has just been operated for approximately 30 minutes before storage |
CARE & MAINTENANCE
MAINTENANCEYour tool requires no additional lubrication or maintenance. There are no user-serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.
RECYCLING AND DISPOSAL
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.Check with your Local Authority or retailer for recycling advice.For further information visit www.recycle-more.co.uk
DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the battery pack properly. This battery pack contains Li-Ion batteries. Consult your local waste authority for information regarding available recycling and/or disposal options. Discharge your battery pack by operating your tool, then remove the battery pack from the tool housing and over the battery pack connections with heavy-duty adhesive tape to prevent short circuit and energy discharge. Do not attempt to open or remove any of the components.
REPAIRThis product does not contain any parts that can be repaired by the consumer. Contact an authorized service center or a similarly qualified person to have it checked and repaired.
STORAGE
- Switch the product off and remove the battery pack.
- Clean the product as described above.
- Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
- Always store the product in a place that is inaccessible to children.
- We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
TRANSPORTATION
- Switch the product off and remove the battery pack.
- Attach transportation guards, if applicable.
- Always carry the product by its handle.
- Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.
- Secure the product to prevent it from slipping or falling over.
GUARANTEE
At Erbauer we take special care to select high-quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 2-year trade guarantee against manufacturing defects on our Erbauer power tool products. This power tool is guaranteed for 2 years from the date of purchase, if bought in-store, delivered, or bought online. You may only make a claim under this guarantee upon presentation of your sales receipt or purchase invoice. Please keep your proof of purchase in a safe place.This guarantee covers product failures and malfunctions provided the Erbauer power tool was used for the purpose for which it is intended and subject to installation, cleaning, care, and maintenance in accordance with standard practice and with the information contained above and in the user manual. This guarantee does not cover defects anddamage caused by or resulting from:
- Normal wear and tear, including accessory wear
- Overload, misuse, or neglect
- Repairs attempted by anyone other than an authorized agent
- Cosmetic damage
- Damage caused by foreign objects, substances, or accidents
- Accidental damage or modification
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee is limited to parts recognized as defective. It does not, in any case, cover ancillary costs (movement, labor) and direct and indirect damage. If the Erbauer power tool is defective during the guarantee period, then we reserve the right, at our discretion, to replace the item with a product of equivalent quality and functionality or to provide a refund. This guarantee only applies to the country of purchase or delivery and is not transferrable to any other country. This guarantee is non-transferable to any other person or product. Relevant local law will apply to this guarantee. Guarantee-related queries should be addressed to a store affiliated with the distributor you purchased the Erbauer power tool from. This guarantee is in addition to and does not affect your statutory rights relating to faulty goods as a consumer.
DECLARATION OF CONFORMITY
EU Declaration of ConformityWeKingfisher International Products Limited3 Sheldon SquareLondon W2 6PXUnited KingdomDeclare that the product:Erbauer 18V cordless multi-tool EMT18-Li-QCSerial number 00001-99999Complies with the essential health and safety requirements of the following directives:2006/42/EC The Machinery DirectiveReferences to the following harmonized standard were made:EN 62841-1:2015EN 62841-2-4:20142014/30/EU Electromagnetic Compatibility directiveReferences to the following harmonized standard were made:EN 55014-1:2017EN 55014-2:2015(EU) 2015/863 amending 2011/65/EU Restrictions of the Use of Certain Hazardous Substances inElectrical and Electronic EquipmentAuthorised signatory and technical file holder:Kingfisher International Products Limited3 Sheldon SquareLondon W2 6PXUnited Kingdomon: 18/06/2018
Lisa DavisGroup Quality Director
Manufacturer • Fabricant • Producent • Hersteller • Producator • Fabricante:Kingfisher International Products Limited3 Sheldon Square London W2 6PXUnited Kingdomwww.kingfisher.com/products
DISTRIBUTOR:B&Q plc,Chandlers Ford, Hants, SO53 3LEUnited Kingdomwww.diy.comScrewfix Direct Limited,Trade House, Mead Avenue,Yeovil, BA22 8RT, United Kingdomwww.screwfix.comTo view instruction manuals online,visit www.kingfisher.com/products
References
[xyz-ips snippet=”download-snippet”]