estelle ESFLFEXWNDA Ultrasonic Skin Scrubber Lifting and Exfoliating Wand User Guide

ESFLFEXWNDA Ultrasonic Skin Scrubber Lifting and Exfoliating Wand

USER GUIDEestelleExtractEnhanceCleanseULTRASONIC SKIN SCRUBBER LIFTING & EXFOLIATING WAND

SAFETY & WARNINGS
  • Use the hand to hold the conductive strip on the side of the machine so that the ion input and output function works properly.
  • Aim to keep the angle of the probe at around 45° during use.
  • Do not stay in a fixed position on the face when using, always maintain slow movement.
  • If there is inflammation on the face, wait for the symptoms to disappear before using the product.
  • It is recommended to use this product 2-3 times a week. Avoid using it multiple times a day.
  • Always keep the skin and body clean and be mindful of the operating time.
The following people should not use this product:
  • Those experiencing pregnancy or menstruation; it may cause skin problems due to hormonal imbalance.
  • Those with dermatitis, skin allergies and severe sunburn.
  • Those with skin damage, eczema, people who are swollen and so on. Those recovering from recent surgery.
  • Those under the influence of alcohol or medication, excessive fatigue, or poor physical condition.
  • Children (please keep the product out of reach of children)
OVERVIEW

OPERATION
  • Press and hold the power/mode button to switch the unit on.
  • Do not use on a dry face; always keep the face wet with gentle mist or steam.
Exfoliating

Extract mode (With use of toner/lotion)

  1. Apply a proper toner or lotion to your face.
  2. Press the mode switch to select extract mode.
  3. With the spatula facing inwards, slowly push the spatula against the direction of pores. Starting outwards towards nose, or from chin and upwards. 4. Rinse your face with warm water.
Nutrition absorption

Enhance mode (With use of essencelemulsion/mask)

  1. Apply a proper serum/lotion on your face.
  2. Adjust the gear selection to enhance mode.
  3. With the spatula facing outwards, gently move the spatula close to the skin. Start from the cheek and move outwards to the ear.
Skin rejuvenation

Cleanse mode (With use of firming cream)

  1. Keep your face moist.
  2. Adjust the gear selection to cleanse mode.
  3. With the spatula facing inwards, slowly push the spatula against the direction of pores. Start outwards towards the nose, or from the chin and upwards.
Cleansing

Cleanse mode (with facial cleanser/cleanser use)

  1. Warm water to wet the face, using facial cleanser/cleanser makes foam, Use instrument cleaning.
  2. Adjust the gear selection to cleanse mode.
  3. With the spatula facing inwards, slowly push the spatula against the direction of pores. Starting outwards towards nose, or from chin and upwards.
Charging

When charging, the battery display will flash blue until the unit is fully charged. The battery display will then show a solid blue light. When the appliance is on low battery, the battery display will flash 5 times and the unit will automatically power off.

CLEANING & CARE
  • Keep the appliance away from moisture. Do not place the appliance in a dishwasher. Always turn off the appliance before cleaning.
  • Do not use sharp, corrosive materials or volatile diluents as cleaning agents.
  • Wipe gently with a soft cloth or cotton pad that has been lightly dampened.
  • Do not rinse the appliance directly with water, as this will cause damage.
  • If the appliance is not in use for an extend period (around 3 months), fully charge and store it to avoid damage to the internal battery of the machine due to lack of electricity.
TROUBLESHOOTING
Phenomenon Possible reason Measure
Probe does not vibrate
Probe deformation
Squeeze the probe with both hands and gently align it
Internal malfunction
Contact kogan.com
Excessive pressure during use
Reduce the intensity of | the operation; the probe should be lightly touched to the skin
Appliance will not power on
Battery shortage
Charge the machine for 2 hours, then turn it on
Excessive storage time of the machine causes battery damage
Contact kogan.com
Water ingress inside the appliance
lon input/output failure hand is not touching the conductive strip on the side of the appliance
Ensure your hand is in Hand is not touching thecontact with the conductive
The internal circuit of the appliance is damaged by water
Contact kogan.com
If this product does not work properly, discontinue use and contact kogan.com
SPECIFICATIONS
Battery 3.7V
Working voltage 3.4-4.2V
Rated power 1.5W
Product size 17 x 4.5 x 1.4cm
Executive standard
Q/SKT 006-2019

Need more information? We hope that this user guide has given you

the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.comkugan.com

[xyz-ips snippet=”download-snippet”]