estelle Visible Silicone Blackhead Remover User Guide
SAFETY & WARNINGS
- Do not use the device if the suction nozzle is not installed.
- This product is charged using a DC 5V adapter. When charging, the battery indicator will be RED. When it fully charged the indicator will turn GREEN.
- When the battery is low, the battery indicator will flash RED 10 times and then power down. Please charge the product.
- Do not use alcohol, detergents containing mercury, alkaline, acid and other supplies to clean the device.
- Not recommended for use whilst pregnant.
- Not recommended for use on children.
- Do not use if you have a cut on your skin.
- Do not wash the device, it is not waterproof. The suction nozzle can be disassembled and independently cleaned and disinfected.
- Do not drop the device, as the air-tight structure may be damaged causing it to malfunction.
- The area being treated should be kept clean and dry when using the blackhead remover. The suction nozzle should be cleaned after every use.
- Use the device only according to the instructions in this user guide.
- The following situations may result in voiding the warranty:– Damage because of incorrect usage.– Damage because of incorrect disassembly or repairing.– Damage due to accidental dropping.– Damage due to fire, water, electric shock, other weather factors.
OVERVIEW
OPERATION
Changing the suction nozzles
- Removal: hold the device with one hand, press the suction nozzle with the other hand and pull it out. (Figure 1).
- Installation: hold the device with one hand, push the suction nozzle with the other hand into position, until it is securely in place. (Figure 2).
Figure 1
Figure 2
Changing suction levels
- Press and hold the Power button for 1 second to turn the device on. The low-speed indicator will turn BLUE and the light will turn on.
- Pressing the Power button again will increase the suction. The mid-speed indicator will turn BLUE.
- Pressing the Power button a third time will increase the suction. The high-speed indicator will turn BLUE.
- Pressing the Power button again will lower the suction. The low-speed indicator will turn BLUE.
- Press and hold the Power button for 1 second to switch the device off.
Light
- With the device turned on, press the Power button twice. The supplementary light will turn off.
- To turn the light back on, press the Power button twice.
Removing blackheads
- Apply a hot towel to your face for 1 – 2 minutes to help open the pores.
- Place a cotton pad into some blackhead extraction solution, then apply the cotton pad to the nose and leave for 6 – 8 minutes (this step is optional).
- Turn on the blackhead remover, face a mirror to help observe the blackheads. Place the suction nozzle on the blackhead and allow the device to remove the blackhead from the pore.Note:Keep the device moving back and forth during use. It is not recommended to keep it in the same place for too long.
- Using a pore minimising product after treatment can help in the reduction of blackheads returning.
- The device will automatically shut down after 5 minutes of use.
SPECIFICATIONS
Need more information?
We hope that this user guide has given youthe assistance needed for a simple set-up.For the most up-to-date guide for your product,as well as any additional assistance you may require,head online to help.kogan.com
report this ad
[xyz-ips snippet=”download-snippet”]