ETEKCITY Air Mattress Instructions

ETEKCITY Air Mattress Instructions

Thank You.

Thank you for purchasing the EAM-DO1/EAM-DT1 Air Mattress by Etekcity. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at (855) 686 3835 or by email at We hope you enjoy your new product!

Package Contents

  • 1x Air mattress
  • 1x User Manual

Safety Information

IMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.

WARNING: To reduce the risk of burns, fire, electric shock or injury:

  • Always unplug the air mattress when not in use.
  • Close supervision is necessary when this furnishing is used by, or near children, or people with limited mobility.
  • This air mattress is only to be used for its intended use as described in this manual.
  • DO NOT operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it is wet.
  • Keep the power cord away from heated surfaces.
  • DO NOT block the air openings while the device is in operation.
  • Always keep air openings free of lint, hair, and other small objects. Never drop or insert objects into any of the openings.
  • DO NOT use the air mattress outdoors or in damp areas, this product is for household use only.
  • DO NOT operate this device where aerosol (spray) products are being used or where oxygen is being administered.
  • DO NOT use the air mattress to support video equipment such as televisions or computer monitors.
  • DO NOT use near people using or wearing medical devices.
  • Keep away from sharp objects that may damage product. Do not operate with any sharp tools or gadgets around when mattress is being used.
  • Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15 months to sleep on this inflatable air mattress. Infants can suffocate on an underinflated or deflated mattress, on bedding, by co-sleeping with another person, and by entrapment between the mattress and bed frame or between the mattress and a vertical surface.
  • Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a shoulder width space between the inflatable mattress and adjacent vertical surfaces such as walls, dressers, or other objects.
  • Always keep the inflatable mattress fully inflated when in use.CAUTION: This device is operated with an electrical air pump that is thermally protected. The pump does not contain parts that can be repaired or serviced. Opening the pump casing may expose to the risk of electric shock. If you have any issues with the electrical pump upon arrival, please contact our helpful customer service team immediately.
  • DO NOT open the air pump casing for any reason.
  • DO NOT use on surfaces where heat may cause a problem.
  • A fire may occur if this device touches or is covered by flammable materials including curtains, draperies, cardboard, plastics etc., while in operation.
  • DO NOT operate the pump in enclosed spaces that are not well-ventilated. Always ensure there is at least 2 ft. of clearance from any wall or object while the pump is in operation.
  • DO NOT operate the pump in the presence of explosive and/or flammable fumes.
  • DO NOT place any part of the pump or cord in or under water or other liquid.
  • DO NOT exceed the weight limit for this device: 550 lb (EAM-DT1) and 650 lb (EAM-D01).


Main Functions

  1. Air Mattress (Felt Side Facing Up).
  2. Power Cord.
  3. Power Cord Compartment.
  4. Control Dial.


  1. Remove the air mattress from its packaging and unfold it so that the felt side is facing up.
  2. Connect the power cord to an electrical outlet.
  3. Please make sure the voltage is 120V.


  1. Turn the control dial clockwise to “Inflate” the air mattress.
  2. Turn the control dial back to “Off” when the mattress has reached the desired firmness. Make sure the control dial is aligned with the “Off” arrow.
  3. Lie on the air mattress to test the firmness.
  4. Adjust the firmness by either continuing to inflate the air mattress or turn the control dial to “Deflate” to let some air out.
  5. Unplug the power cord and store it in the power cord compartment.

  1. Plug in the power cord and turn the control dial counterclockwise to “Deflate” the air mattress.
  2. Allow the air mattress to completely deflate. Unplug the power cord and place it back into the storage compartment.
  3. Make sure the mattress is clean and dry.
  4. Lay mattress felt-side up and fold the mattress into thirds, then roll up the mattress to release any remaining air.
  5. Store the mattress in a cool, dry place.

Tip for Best Use

  • After removing the air mattress from its packaging, allow it to air out in an open room with proper air circulation. Any smell emitted is not toxic and is the normal smell of the PVC material. Please note that it may take up to a week for the mattress to completely air out.
  • When inflating the mattress for the first time, it is best to let the mattress rest for 8 to 12 hours so that the seams can buffer.
  • It is normal for the mattress to lose a small amount of air after you fully inflate it; this is normal.
  • If you are using the air mattress for more than one night, supplement the mattress each day with an 10 to 15 seconds of air to maintain its firmness.
  • Always make sure the control dial is in the “OFF” position after inflating.
  • After 5 minutes of continuous use, the air pump will start to generate heat and will automatically turn off. Allow the air pump to cool down for 30 minutes before resuming use. Please note that it is not recommended to run the air pump for longer than 5 minutes.


Model No.




Twin 75 x 39 x 18 in 191 x 99.1 x 45.7 cm

Queen 80 x 60 x 22 in 203 x 152 x 56 cm

Max. Weight Capacity

550 lb

650 lb

Rated Power







Terms & Policy

Etekcity warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year, effective from the date of purchase. Warranty lengths may vary between product categories. Etekcity will replace any product found to be defective due to manufacturer flaws based on eligibility; refunds are available within the first 30 days of purchase. This warranty extends only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product.

Additional 1-Year WarrantyYou can extend your one-year warranty by an additional year. Log onto and enter your order number (i.e. Amazon or Houzz) to register your new product for the extended warranty.

If you are unable to provide the order number for your product, or if your product has been gifted to you, please type a short note in the order number field along with the date you received your product (i.e. “Gift received on dd/mm/yy”).

This warranty is non-transferrable. Etekcity is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual.

This warranty does not apply to the following:

  • Damage due to abuse, accident, alteration, misuse, tampering or vandalism.
  • Improper or inadequate maintenance.
  • Damage in return transit.
  • Unsupervised use by children under 18 years of age.

Etekcity and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.


Should your product prove defective within the specified warranty period, please return the defective unit in its original packaging with (1) an original copy of the invoice, (2) your order confirmation number, (3) and your warranty ID number. To find out more about extending your warranty, visit or contact customer support.

Date of Purchase
Place of Purchase
Order Number

Customer Support

Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours!

Customer Support

Etekcity CorporationAddress: 1202 N Miller St. Suite A Anaheim, CA 92806Toll-Free: (855) 686-3835Fax: (657) 202-1693Local: (657) 500-1872Email: [email protected]

Support Hours

Monday – Friday: 9:00 am – 5:00 pm PST

  • Please have your order confirmation number ready before contacting customer support.

Scan here to join the Community!Visit us at



[xyz-ips snippet=”download-snippet”]