Get Started
Safety Instructions
- Do not connect appliances to this remote-controlled socket-outlet if the instruction manual of the appliances prohibits being remote-controlled (for example appliances according to EN 60335-2-9 like grills, toasters, and similar portable cooking appliances, or portable kitchen appliances, or appliances with heating elements like ovens or heaters, etc.).
- Do not connect any appliances to this remote-controlled socket-outlet that are radiating heat and may cause ignition or burning of surrounding materials (for example radiation heaters, portable heaters, portable floodlights, desk lamps, etc.).
- Keep in mind that connected appliances might be moved by pets, cleaning staff or other persons who are not aware of the remote control functions.
- Do not connect any appliances with potential hazards such as moving parts (for example drills, table saws, blenders, etc.).
- The connection/installation of this product should be in a suitable area with the remote-controlled socket-outlet easily readable and accessible for disconnection actions.
- Only voltage-free if the plug is pulled. Do not connect in series.
Specifications
Frequency range: 2402 – 2480 MHz (BLE) / 2405 – 2480 MHz (Thread)Max. EIRP: 10 dBmDegree of protection: IP20Class I product with earth contact in plug and socket-outletPollution degree: 2Ambient air temperature: 0 °C – 35 °CRated impulse withstand voltage: 2.5KVNumber of operating cycles: 10.000 cyclesCircuit disconnection: RelayProof Tracking Index (PTI): 175Level of glow wire test: Level 1Type of load: Resistive load or filament loadStandby Power Consumption < 1 W
Get started
- Plug Eve Energy into a powered socket.
www.tuv.com - Download the Eve app from the App Store.
- Open the Eve app and tap Add Accessory. Eve will now guide you through the setup process to remotely control your devices.If you have already set up another accessory, go to the Eve settings to add Eve Energy to your home.
Enjoy
Eve Energy can be controlled using the Eve app, the Home app, and Siri.
 |
Control |
 |
Set schedules(no home hub required) |
 |
Enable child lock |
 |
Monitor energy consumption |
 |
Adjust status LED |
 |
Install firmware updates |
Control
Configure guest access
Control
You can also use the button to switch Eve Energy on and off.
Schedules automatically control devices connected to Eve Energy – completely autonomously, independently of your iPhone or home hub. Set schedules that match your daily routine using the Eve app.
Securely access Eve Energy while you’re away from home and set up powerful automation. Any Apple TV HD, Apple TV 4Kor HomePod using the same iCloud account as your iPhone will automatically serve as a home hub, no further setup is required.
Projected costs can be calculated based on the consumption of the last minute, day, or week. Go to Settings > General > Energy Cost to enter your electricity rate and accurately calculate costs.
Eve Energy is designed to safeguard your personal data. All data is fully encrypted and only transferred directly between your Eve Energy and iPhone, iPad, or home hub. Learn more at evehome.com/privacy
Please keep your HomeKit Setup Code in a safe place. You need it to securely add Eve to your home, and nobody but you has a copy. Hereby, Eve Systems declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at www.evehome.com/doc Product: 10EBT8601 • Model: 20EBT8601 • Part: 51EBT8602
Room:……………………………Notes:……………………………
References
[xyz-ips snippet=”download-snippet”]