FEIT Electric LAN4SQ/FY/SOL 4 inch Square Solar Powered Outdoor Fairy Lantern Installation Guide
READ BEFORE INSTALLATIONSAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store,call Feit Electric Customer Service8 a.m. – 5 p.m., PST, Monday – Friday1-866-326-BULB (2852)
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Solar LED Lantern.We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.Thank you for choosing Feit Electric.
Safety Information
READ BEFORE INSTALLATION
HOW SOLAR LIGHTS WORKSolar light has a solar panel that converts sunlight into electricity. During the day, the electricity converted by the solar panel is stored in the rechargeable battery. At night, the solar light is powered by the battery using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions and season.
Choosing the right locationSelect a location with full, direct sunlight. Do not install in shady areas as these areas will not allow the battery to be fully charged and will reduce nighttime working hours. Be sure that the selected location is not close to other nighttime light sources such as street lights or porch lights. These light sources may keep the solar lights from turning on automatically.
· IP65 Wet rated for outdoor use· Charging time: 6-8 hours· Working time: 8 hours
CAUTION: Risk of fire, explosion, and burns. Do not disassemble, crush, or incinerate. Improper use of this product can result in injury. Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING: Dispose of used battery promptly according to local recycling or waste regulations. WARNING-KEEP BATTERIES OUT OF REACH FROM CHILDREN. Clean battery contacts and also device contacts prior to installing new battery. Ensure that the battery is installed correctly with regard to polarity (+ and -).
SAVE THESE INSTRUCTIONS
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. CAN ICES-005 (B).
Supplier’s Declaration of Conformity:47 CFR § 2.1077 Compliance Information
Responsible Party:Feit Electric Company4901 Gregg Road,Pico Rivera, CA 90660, USA562-463-2852
Unique Identifier:LAN4SQ/FY/SOL
Limited Warranty
This product is warrantied to be free from defects in workmanship and materials for up to 1 year from date of purchase. If the product fails within the warranty period, please contact Feit Electric at , visit feit.com/contact-us or call 1-866-326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
Pre-Installation
TOOLS REQUIRED (NOT INCLUDED)
Phillips head Screwdriver
HARDWARE INCLUDEDNOTE: Hardware not shown to actual size.
Installation Options
- Select desired height for your Shepherd’s Hook. You have options of 1 ft, 2 ft, 3 ft or 4 ft in height.
- Before hanging the fixture on the Shepherd’s Hook, make sure the ground stake is properly secured in the soil by using your foot to firmly press down on the ground stake.NOTE: Wet the soil to make it easier for you to insert the ground stake.
- Once the ground stake is secured in the soil, hang the fixture on the Shepherd’s Hook.
Operation Instructions
- Turn on the fixture by pressing and holding the power button located on the bottom of fixture.
- To select between the 4 different modes: Once fixture is on, continue to press the power button to transition to these settings:
- 1x Fairy fade
- 1x Fairy fade+downlight
- 1x White twinkle
- 1x White twinkle+downlight
- a. Transition between different colors: Double press the power button quickly to transition between different colors: Blue, Red, Green, Yellow, Turquoise, Purple, Light Blueb. Select a Solid Color: While colors are transitioning press the power button once (1x) to hold the color. Double press (2x) the power button to go back to the color transitions.
- Go back to the original 4 modes (Step 2): Press the power button three times quickly (3x) to go back to the original 4 modes.
Battery Replacement
- To replace the battery, remove the lid by unscrewing the lid screws using a Phillips head screwdriver.
- Replace current lithium-ion battery with a new Lithium-Ion 18650 3.7V minimum 1500mAH.
- Reattach the lid by securing the screws using a Phillips head screwdriver.
QUESTIONS, PROBLEMS, MISSING PARTSBefore returning to the store, please call our Customer Service team at Toll Free 1-866-326-BULB (2852) or at [email protected]
References
[xyz-ips snippet=”download-snippet”]