FEIT Electric MOON1/RGBW/LED Colorful Moon Light Installation Guide

MOON1/RGBW/LED Colorful Moon Light



LED Colorful Moon Light

READ BEFORE INSTALLATIONSAVE THESE INSTRUCTIONSQuestions, problems, missing parts? Before returning to the store, call Feit Electric Customer Service8 a.m. – 5 p.m., PST, Monday – Friday 1-866-326-BULB (2852) FEIT.COM

We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Moon Light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Feit Electric.

Important Safety Information


Read and understand all Safety and Operating instructions in this manual before using this product.Follow all safe guards stated in the manual, in addition to normal safety precautions in working with electrical devices. Always follow basic safety precautions to reduce the risk of fire, electric shock and personal injury.

  • Do not use with an extension cord near water or in areas where water may accumulate. Keep the Moon Light at least 16ft. from pools or spas. Keep plugs dry. Only use this Moon Light with GFCI-protected outlets.
  • To disconnect, turn off the switch, then remove the plug from the outlet. Do not turn off by pulling on the cord.
  • Do not insert foreign objects into this product.
  • To reduce the risk of fire, keep away from combustible materials while in operation.
  • To reduce the risk of injury, close supervision is necessary when this product is used near children.
  • For indoor use.
  • Follow all charging instructions and do not charge unit outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.

WARNING: RISK OF SHOCK. House electric current can cause painful shock or serious injury unless handled properly.Operating temperature:During Charge: 50°F to 113°F (10°C to 45°C)During Discharge: -4°F to 140°F (-20°C to 60°C


Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifier: MOON1/RGBW/LEDResponsible Party:FEIT ELECTRIC Co.4901 GREGG ROAD, PICO RIVERA, CA 90660, USA 90660-2108TEL: (562) 463-2852, www.feit.com

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Limited Warranty

This product is warranted to be free from defects in workmanship and materials for up to 1 year from date of purchase. If the product fails within the warranty period, please contact Feit Electric at , visit feit.com/contact-us or call 1-866 326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

WWW.FEIT.COMPlease contact 1-866-326-BULB (2852) for further assistance.


PARTS INCLUDEDNOTE: Parts not shown to actual size.

Parts of the Moon Light

Bottom of the Moon Light

Frame Assembly

1 Take out the Wooden Frame (BB) and insert the dowels into the slots (see Fig. 1).

Fig. 1

Moon Light Operation

NOTE: The Moon Light (AA) can be controlled by using the button on the bottom of the Moon Light (AA) or by using the included Remote Control (CC).

1 Repeatedly press the small metal button on the bottom of the Moon Light (AA) to cycle through the different color options (See Fig. 2). To turn off the Moon Light (AA), hold the button down for 3 seconds.

report this ad

OR2 For Remote Control (CC) operation, press the ON button to turn the Moon Light (AA) on and use the remaining buttons to adjust the colors and settings. Press the OFF button to turn the Moon Light (AA) off.

Charging the Moon Light

1 Plug the Charging Cable (DD) into the charging port on the bottom of the Moon Light (AA) (see Fig. 3). The indicator will light when charging and turn off when the battery is fully charged.

Charging Time 2 hours
Working Time
6-8 hours (3 hours on white)
Charging Input 5VDC/ 0.5A
Battery Capacity 3.7V 300mAh

Remote Control Functions

NOTE: Includes 1 CR2025 Lithium Cell.

WWW.FEIT.COMPlease contact 1-866-326-BULB (2852) for further assistance.


[xyz-ips snippet=”download-snippet”]