FENTON RP102 Series Record Player BT Instruction Manual

RP102 Series Record Player BTRef. nr.: 102.162; 102.163

INSTRUCTION MANUAL

Congratulations on the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.Keep the manual for future reference.

  • Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a  while.
  • The unit contains voltage-carrying parts. Therefore doNOT open the housing.
  • Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
  • Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
  • The unit is not suitable for continuous use.
  • Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
  • When unplugging the unit from a mains outlet, always pull the plug, never the lead.
  • Do not plug or unplug the unit with wet hands.
  • If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
  • If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. DoNOT connect the unit to a rheostat or dimmer.
  • To avoid fire and shock hazards, do not expose the unit to rain and moisture.
  • All repairs should be carried out by a qualified technician only.
  • Connect the unit to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
  • During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
  • If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors. – To prevent accidents in companies, you must follow the application guidelines and follow the instructions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate our warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by the disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

  1. Power & volume control knobTo power on the record player, turn this knob clockwise until it clicks. When powered on, use this knob to adjust the volume for the internal speakers and headphones. To  turn off the record player, turn this knob counterclockwise until it clicks.
  2. Headphone connectorConnect your headphone with this 3.5mm(1/8) jack connector.
  3. LED indicators
  4.  AUX input3.5mm(1/8) jack connector for auxiliary input.
  5. Function switch knobKnob to select phono, aux or BT input.
  6. USB portUse the included USB cable to connect your turntable to your computer. The USB connection will send audio from the turntable to your computer.
  7. DC IN portConnecting the 12Volt/DC power adaptor.
  8. RCA Line outputThe audio from a playing vinyl record is sent to this line-level coaxial audio output. This must not be connected to phono-level devices.
  9. 45RPM AdaptorThis adaptor allows you to play 45RPM records.
  10. Autostop Switch ON/OFFThis switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the tonearm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records stop before the end or do not stop when the end is reached. In this case, set Auto-stop to OFF.
  11. 33 / 45 / 78 RPM SwitchThis switch controls the RPM of the turntable platter.
  12. Arm ClipThis specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked.
  13. Cartridge with needleWhen the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
  14. PlatterPlace your record here.

OPERATION

  1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
  2. Remove the white protective needle cover by gently pulling towards the front of the unit.
  3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to the record.
  4. Open the tone arm clip to release the tonearm. Gently move the tonearm and put the cartridge onto the desired position of the record and the turntable player starts to play.
  5. Turn the volume control knob clockwise to adjust the volume.

Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is turned OFF, the record will NOT stop automatically when finished.

BT CONNECTION

Turn the function knob to BT mode. The LED indicator will flash in blue color.Turn on the BT function on your mobile phone or tablet PC and then search the turntable player (Fenton record player). After pairing and connection, the LED will light up continuously in blue color and you can play your music on your mobile phone or tablet PC on this turntable player.Turn the volume control to adjust the volume. (The volume control of the mobile phone, tablet, or PC can also affect the total volume.)

CONNECTING WITH COMPUTER

Before you connect the turntable to a computer, unplug it from your mixer or Hi-Fi system.The included software is a third party application and therefore Fenton does not handle any questions or problems regarding the software.

  1. Turn the computer on
  2. If the computer is booted, connect the turntable. The computer will now install the drivers.
  3. After the drivers are installed, you must now install the Audacity software.

Windows users: insert the CD or download the newest software via http://audacity.sourceforge.netMAC users: download the newest software via http://audacity.sourceforge.net

To Install Software (PC)

  1. Plug in your turntable to an power supply and connect the USB port on the Turntable to the USB port of your computer.
  2. Turn on the power switch to your turntable.
  3. The Windows system will detect a new device and indicate that it is available to use.
  4. Insert the CD that came with your USB turntable.
  5. Run the file to install the Audacity software. Once installed, run the Audacity program.

To Install Software (MAC)

  1. Insert the included CD.
  2. Open the CD icon on the desktop.
  3. Drag the installation folder for the audacity to your hard drive. We recommend that you move the folder to your “Applications” folder.
  4.  A window will come up which shows the files copying.
  5. EJECT the CD.
  6. Open “Audacity” from where you moved it to on your hard drive.

SOFTWARE CONFIGURATION

  1. Click on Microphone in the drop-down menu and select “Stereo Mix”.
  2. Select the “Edit” menu and then “Preferences”Select the USB audio device under the “Recording” selection as shown. Select “Software Playthrough” to hear the audio while recording.

Note: The attached Audacity software is for reference only. For more information and the latest software version, please check the website: http://www.audacity.com

TECHNICAL SPECIFICATION

Input Connections:Output Connections:Speed Settings (RPM):Power Supply:Dimensions (L x W x H):Weight: 3.5mm jack3.5mm jack, RCA, USB33, 45, 78100-240VAC 50/60Hz (12V Adapter)322 x 290 x 130mm2,00kg
report this ad

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.The products referred to in this manual conform to the European Community Directives to which they are subject:

  • Low Voltage (LVD) 2014/35/EU
  • Electromagnetic Compatibility (EMC) 2014/30/EU
  • Restriction of Hazardous Substances (RoHS) 2011/65/EU

Specifications and design are to change without prior notice.www.tronios.comCopyright © 2020 by TRONIOS the Netherlands

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , ,