Fiido M1-Pro Electric Bike User Manual

1. Important Note
2. Product components
3. Installation instructions
4. Folding instructions
5. Product parameters

2

1. Important Note

a) This manual include important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product..

b) If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.

c) Please wear a suitable and safe helmet before riding, please wear the clothes with fluorescent and reflective stripes when you ride at night. Don’ t exceed speed limit, it is a main reason of traffic accident, we should abide by the traffic rule, we shouldn’t exceed the speed limit.

d) Don’t touch the charging hole on the bike, or use metal touch it, otherwise,the accident will be caused by the transient short circuit of the current.

e) Zero starting, braking frequent, driving against the wind, carrying people or anything, insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage,please do something as follows:

1. Please use assist mode.
2. On the premise of safety, don’ t brake frequently or use zero starting.
3. Don’ t overload.
4. Before riding, please check the pressure of the tire, and supply enough pressure.

f) Our Ebike should avoid prolonged exposure to the sun or rain , avoid storage in places with high temperature or corrosive gas,so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents.

g) When charging the electric bicycle, please make sure that there is no foreign matter in the charging port. Connect the charger to the bicycle first, then connect the AC power to prevent sparking.

h) When the electric bicycle is not used for a long time, please turn off the main switch in time and charge it in time. Store the battery fully charged, don’ t store it in case of power loss, so as to avoid serious power loss of battery.

i) Your current insurance business may not cover the situation you may encounter when riding a electric bike, please contact your insurance company or insurance broker for relevant consultation.

j) According to the law in China, riding an electric bicycle or a three-wheeled Electric bike must reach the age of 16. If you use this product in other countries, please refer to the local laws and regulations.

k) Bicycles are vehicles with certain risk fact factor , please be sure to abide by the traffic rules. At the same time, when emergency braking ,brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully .

3

2. Structure illustration

1. Seat tube     2. Quick lock     3. Brake disc     4. Motor5. Chain      6. Shock absorbe   7.  Controller box8. Folding system   9. Battery box    10. Charge port11. Chain wheel     12. Pedal    13. Crank    14. Handle bar15. Stem    16. Folding system    17. Headlight

4

1. Brake power off system   2. Light/horn button    3. Horn4. Power on/off button(Long press on or off)   5. Power adjustment    6. Speed regulation7. Power off brake   8. Speed-up rotating handle   9. Battery Level   10. Speed11. Electric assist gear   12. Use mileage

( Note:After the bike is stationary, it does not run for 10 minutes to enter the sleep mode and automatically shut down )

7. Hold and press with your fingers,folding the pedal

14. Battery charging port (located below the main beam of the frame)

5

3. Installation instructions

1. Fold the riser to the upper end, lock the riser folding handle,adjust the riser safety hook to the tightening state,and adjust the position of the T handle.
2. Install front wheel; First install the front wheel on the front fork and lock the front wheel with screws.
3. Open the clip on the seat tube clamp and insert the seat tube into the position within the marking line on the seat tube. Adjust the seat to the comfortable height according to individual needs, and fasten the seat tube clip.

4. Please confirm the following items before riding: frame lock, standpipe lock and seat tube lock are locked.5. Brake system is normal. Tires are adequately inflated. All these are important for a safe and comfortable riding.

6

4. Folding instructions

Step 1. Open the quick lock on the head end, to let the handle be perpendicular to the care frame.Step 2. Open the quick lock on the Stem, lower the riser,as well as locking the quick lock.Step 3. Open the Seat Tube quick lock, decentralized seats, as well as locking the quick the quick.

Note: Both the Rise and the Seat Tube are marked with a safe (MAX or MIN). For safety reasons, please use them in a safe range.

Step 4. Turn the buckle on the Standpipe clockwise and pull down the fold and fold down the front.Step 5. Open the frame holder of the fuse buckle, pull the fold, and the frame.

Open

Open

Remove Battery

7

5. Product parameters

Name                           Specification

Electric Bike System               Fiido SystemElectric Motorcycle                SupportPower Assist System               SupportPower Assist System               3 Gears AssistMax Load weight                    120kgMaximum Speed                     50km/hMaximum Range                    Power assisted models up to 60KM~80KMBattery                                    High quality lion battery 48V 12.8AhBattery adaptation                   DC 54.6V2ARecharge Time                        7 hoursDrive Type                              Rear DriveFrame Material                       Aluminum AlloyBrake Type                             Mechanical Disc BrakesChainset                                 Steel 52 ToothGears                                      Shimano 7 speedChain                                      KMC Z7Rear Brake                              Mechanical Disc BrakesRear Hub/Rated Power          CZTB Motor/500WRims                                       AlloyWheel Size                              20”Tyre Size                                 20” X4 inchTyres                                      Cheng Shin TireNet Weight                            25kgFolded Size                           96cm*45cm”79cmSize                                       172cm*26cm*106cm

* The above data allow for 5% manufacturing tolerances.

* After receiving the goods, there may be some differences between individual accessories and display drawings, which are different due to the different batches, and do not affect the use.