M3 User Manual
E-Scooter and E-Bike laws differ by State – check your local laws and only ride in legally permitted areas.Use helmets, protective gear, and always ride responsibly.
Riding Safety
As with other sports, bicycling involves the risk of personal injury and damage to the bicycle. By choosing to ride a bicycle, you assume the responsibility for that risk, so you need to know – and practice – the rules of safe and responsible riding and of proper use and maintenance. Proper use and maintenance of your bicycle reduce the risk of injury.Because it is impossible to anticipate every situation or condition which can occur while riding, this Manual makes no representation about the safe use of the bicycle under all conditions. There are risks associated with the use of any bicycle which cannot be predicted or avoided, and which are the sole responsibility of the rider.If you have any questions or do not understand something, take responsibility for your safety and consult with the bike shop or the bicycle’s manufacturer. It is important for a rider to read carefully all instructions below before your first ride.
Important Note
This manual includes important safety performance and service information. Please make sure to read the following warnings before using our products for the first time.a) If you lend your e-bike to other people, please confirm that he/she has read this manual to decrease the risk of an accident.b) Please wear a suitable and safe helmet before riding, please wear clothes with fluorescent and reflective stripes when riding at night.Follow the traffic rules and don’t exceed the speed limits, which may cause accidents.c) Don’t touch or use metal to touch the charging port on the bike, it will cause a short circuit.d) Following actions will cause huge power drops and reduce the riding distance:
- Starting the bike by using the throttle.
- Frequent braking.
- Riding against the wind.
- Overloading.
- Insufficient tire pressure.
e) To extend the riding range :
- Please use assist mode.
- Brake only when necessary for safety, and don’t use the throttle to start the bike.
- Don’t overload.
- Before riding, please check the tire pressure and supply enough pressure.
f) When charging the e-bike, please make sure that there is nothing inside of the charging port. Connect the charger to the bike first and then to the AC power source to avoid sparking.g) Please consult your insurance company or insurance broker on the insurance coverage of riding an electric bike.h) Generally, people must be 16 years old to ride an e-bike or three-wheel electric bike. Please refer to local laws and regulations when using this product in your country.i) Bicycles are vehicles with certain risks, brake the rear wheel first, and then the front wheel in emergency braking, especially whenthe cycling speed is too high, you may fall over if you use the front brake suddenly. Please ride carefully.
Safety Guidelines
- Always ride with both hands on the handle.
- Do not park in building doors, evacuation staircases, walkways, and safety exits.
- Do not charge inside residential buildings and park
- Stay away from the combustible when charging.
- Please charge according to the suggested time, do not charge for too long.
- Use and store the batteries correctly; batteries should never be disassembled.
- Read all warning terms before riding or charging, only use the original charger.
- When adjusting the saddle position, do not exceed the safety line on the supporting
Bike Diagrams
| 1. Seat tube2. Quick-lock3. Brake disc4. Motor | 5. Chain6. Shock absorber7. Controller box8. Folding system | 9. Battery box10. Charge port11. Chain wheel12. Pedal | 13. Crank14. Handlebar15. Stem16. Folding system17. Headlight |
| 1. Brake power off the system(Left brake handle for rear brake)2. Light/horn button (Click once power on/off)3. Horn button (Click the button once to signal the whistle) | 4. Power on/off button(Long press turn on/off electric power mode)5. Power adjustment (Click once to shift gears, a total of 3 gears)6. Gear indicator&Shifter (Display current gear) | 7. Power off-brake(Right brake handle for front brake)8. Electric-assist throttle(Provide electric assistant)9. Battery Level(Display remaining battery) | 10. Speed(Display current speed)11. Electric-assist power level (Display power level)12. Use mileage (Display the current mileage,long-press M to display the total mileage) |
(Note: The bike will automatically shut down when it is stationary if not used within 10 minutes.)
 |
 |
 |
| 13. Hold and dress with your fingers, folding the pedal. | 14. Battery charging port(located below the main beam of the frame) | 15. Insert the charger port(Standard charger) |
How to adjust the saddle height
Battery seat tube:Open the seat tube quick release(Figure 2), pull the battery seat tube out of the frame, and adjust the height of the battery seat tube up and down according to your needs.When you adjust the height of the battery seat tube, then buckle the seat tube quick release.
- Open the seat tube quick release
- Adjust to the right seat height for you
- Adjust the height of the seat tube, and finally buckle the seat tube for quick release
Unfolding Instructions
- Fold the riser to the upper end, lock the riser folding handle, adjust the riser safety hook to the tightening state, and adjust the position of the T handle.
- Install front wheel; First, install the front wheel on the front fork and lock the front wheel with screws.
- Open the clip on the seat tube clamp and insert the seat tube into the position within the marking line on the seat tube. Adjust the seat to a comfortable height according to individual needs, and fasten the seat tube clip.
- Please confirm the following items before riding: frame lock, standpipe lock, and seat tube lock are locked.
- The Brake system is normal. Tires are adequately inflated. All these are important for safe and comfortable riding.
Folding Instructions
Step 1. Open the quick lock on the head end and make the handle perpendicular to the care frame.Step 2. Open the quick lock on the Stem, lower the riser, and lock the quick lock.Step 3. Open the Seat Tube quick-lock, decentralized seat, and lock the quick lock.Note: Both the riser and the seat tube are marked with a safe (MAX or MIN). For safety reasons, please use them in a safe range.
Step 4. Rotate the buckle on the riser clockwise, pull down the folded part and fold it down.Step 5. Open the frame holder of the fuse buckle, pull the folded part and the frame.
Specifications
| Name | Specification |
| Electric Bike System | Video System |
| Power Assist System | 3 Gears Assist |
| Max Load weight | 120kg |
| Maximum Power assist Speed | 25km/h |
| Maximum Range | Power-assisted models up to 60KM-80KM |
| Battery | High-quality Lithium-ion 48V 11.6Ah |
| Battery adaptation | DC 54.6V 2A |
| Recharge Time | 7 hours |
| Drive Type | Rear Drive |
| Frame Material | Aluminum Alloy |
| Brake Type | Mechanical Disc Brakes |
| Chainset | Steel 52 Tooth |
| Gears | Shimano 7 speed |
| Chain | KMC Z7 |
| Rear Brake | Mechanical Disc Brakes |
| Rear Hub/Rated Power | CZTB Motor/250W |
| Rims | Alloy |
| Wheel Size | 20″ |
| Tyre Size | 20″ X 4 inch |
| Tyre Brand | Cheng Shin Tire |
| Net Weight | 25kg |
| Folded Size | 96cm’45cm`79cm |
| Size | 172cm*26cm*106cm |
* The above data allow for 5% manufacturing tolerances.* After receiving the goods, there may be some differences between individual accessories and display drawings, which are different due to the different batches, and do not affect the use.
Daily maintenance and basic troubleshooting
| The battery won’t charge | 1. Check whether the key is turned on (battery charging needs opening the key to charging the battery ) |
| 2. Check whether the charger is defective | |
| The display cannot be opened | 1. Check whether the key is turned on(open the battery key first, then can turn on the display) |
| 2.7ry plugging in the charger to see if it can be turned on display. If plugin the charger can open, it is the battery broken, can not open is the display or controller broken | |
| Brake abnormal sound or wheel rotation resistance | 1. Check whether the end of the brake cable is stuck. |
| 2. Slight friction can be adjusted by fine-tuning the end of the line | |
| 3. Adjust the brakes to ensure that the brake pad and brake disc clearance is balanced | |
| 4. If the brake pads are worn, replace brake pads. | |
| The chain often falls off | 1. Check whether the chainset is deformed and if the chainset is deformed,it needs to replace the chainset |
| 2. Check whether the rear derailleur is loose, relock the rear derailleur and then lock the screw. | |
| Front shock absorber failure | 1. Check whether the ABS+ lock on the front fork is adjusted to the locked state, and rotate the ABS+ lock towards the direction of unlocking to release it. |
| Fault code | |
| E001 | Controller fault |
| E002 | Display communication fault |
| E003 | Motor hall fault |
| E004 | Handlebar fault |
| E005 | Motor fault |
| E006 | Motor phase fault |
- When the battery is used up, it should be fully charged in time. The green light on the charger indicates a full charge. The long status of underpowered storage will affect the performance of the battery.
- When crossing the pool, water section, please pay attention to the wading height is not higher than the hub to prevent motor damage due to water inflow. Do not use a high-pressure water gun to clean the bike, it can cause damage to the electronic components and wiring due to humidity.
- Add some lubricating oil to the chain and flywheel of the bike to avoid wading and rusting
- It is best to charge the battery in a ventilated, dry place. Direct sunlight or rain can have a bad effect on the performance of batteries and chargers. When charging,the battery, the charger should be away from other sources of heat.
- Connect the battery before charging, and then plug it into the electric supply . After charging, pull out the electricity first, and then pull out the battery end.I do not follow the steps, it will cause a fire when connecting the battery end.
SHENZHEN FIIDO TECHNOLOGY DEVELOPMENT CO.,LTDNO.142 Fiido Industrial Park, Futong Rd. Yuanshan St. Longgang District, Shenzhen, Chinahttps://www.fiido.com email：[email protected]
report this ad
Made in China
[xyz-ips snippet=”download-snippet”]