Fingerprint Lock User Manual
FINGERPRINT LOCK
I .USB Interface:
The product is charged by USB. Please fully charge the product for the first time.
Components:
- USBPort
- LED Light
- Fingerprint Reader
- LockBeam
II .Indicator
Use 3-color indicator. Different indicator represents different devices and status.Please check the details as below chart:
Indicator status | Function |
Low power | Red light flash |
Charging | Red light always on |
Full charged | Lights off |
Green light flash | Fingerprint collection mode |
Green light always on | Successful to collect fingerprint |
Blue light always on | Administrator fingerprint authorization |
Green light flashes fast | Unlocked successfully |
Red light aw;ays on | Delete fingerprint mode |
Red light flash | Failed to collect fingerprint |
Ill .Description Of First Administrator’ s Fingerprint Record
- Long press sensor 3 seconds
- Left your finger when blue light flash
- Start record the fingerprint when green light flash
- Record 10 times with the same finger, and the blue light and green light flashes
- /;; ltreco unsuccessful when red light flash5.lt records successful when blue l~ht flash
- Total of 1 o times of collection was successful, with a loud sound “Di” ,and green light Dynam Devil 3D DY8954 Instruction Manual flash continuosly the admistors fingerprint wasrecorded successfully.
IV. Number 2 to 10 Fingerprint Recording Instructions
- Long press sensor 3 seconds
- .Administrator authorize fingerprint when blue light flash continuously.
- Start record the fingerprint when green light flash
- Record 10 times with the same finger, and the blue light and green light flashes
- ltrecoJ s unsuccessful when red light fiash5.lt records successful when blue light flash
- Total of 10 time: ofc.ollec. tion was successful, with a loud sound “di” ,and green light flash continuously, the fingerpnnt was reoorded successfully.
Remarks:
1. The first and second fingerprints are the administrator fingerprint by default.2. Collecting the second to tenth fingerprints requires administrator fingerprint authorization.
V .Description Of Delete Fingerprint
- Long press sensor6-10 seconds
- Administrator authorize fingerprint when red light flash continuously
- The fingerprint was deleted successfully when green light flash continuously and sound continuously
VI.Specifications
Support 360 degree angel fingerprint recognize Resolution: 508DPI ESD: +/-12kVair, +/-BkV contact FRR: <1% FAR: <0.002%Recognize time: <300mS Battery: 3. 7V 80mAh Charger: 5V 200MA
Remarks:
Only the administrator can delete the fingerprint and delete all the fingerprints at once.
VII.Low voltage
When the voltage ~3.5V, the red indicator flash fast for 15s. If keep in the status of low batter, it will alarming per minute.
Read More About This Manual & Download PDF:
Fingerprint Lock User Manual – Fingerprint Lock User Manual –
[xyz-ips snippet=”download-snippet”]