FLAME BOSS 400 UNIVERSAL User Guide

FLAME BOSS 400 UNIVERSALUSER MANUALVERSION 5User manuals are available atFlameBoss.com/support

WARNING: IMPORTANT SAFETY INSTRUCTIONS

It is important for the safety of persons to follow these instructions. Save these instructions. Follow all instructions, as incorrect installation and use can lead to injury or property damage.

Flame Boss 400 is intended for use only in dry, outdoor locations. Store the unit indoors in a dry location. If you know or suspect that the Flame Boss controller or power adapter has been submerged in water, do not use the unit.

The 12 V DC power to the unit shall be supplied by a properly certified power adapter with SELV / LPS output.

Use only the power adapter provided with the unit.

Do not allow children to play with a Flame Boss 400. Keep away from children.

Flame Boss 400 is not to be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.

Do not place or mount a Flame Boss 400 where it is exposed to excessive heat from the grill or smoker.

WHAT’S INCLUDED

Flame Boss smoker controller with integrated blower
12 V DC power supply
Pit temperature probe
Manifold with fasteners
Meat temperature probe
Threaded adapter

INSTALL FLAME BOSS MOBILE APP

Open the camera app on your tablet or smartphone and point it here:

https://myflameboss.com/app

OR if you are unable to scan the code above, open the browser (Chrome or Safari, for example) on your tablet or smartphone and enter the following address: https://myflameboss.com/app

Follow the instructions in the Flame Boss app to add a controller.

WIFI INDICATORS

The WiFi status is shown with the following LED indicators:

SLOW BLINKING: Controller is in Access Point mode and NOT connected to the Flame Boss server.

FAST BLINKING: Controller is in Station mode and NOT connected to the Flame Boss server.

SOLID: The controller is connected to the Flame Boss server via cloud connector to the controller via local or direct connect.

PLUG INSTALLATION

UNIVERSAL MANIFOLD INSTALLATION

(shown on a Weber Smokey Mountain)

UNIVERSAL THREAD ADAPTER INSTALLATION

(using 3/4″ Bushing – not included)

CONTROLLER INSTALLATION USING MANIFOLD

CONTROLLER INSTALLATION USING THREADED ADAPTER

TOP VENT ALMOST CLOSED

PROBE PLACEMENT

NOW GET COOKIN!

TECHNICAL SUPPORT800-978-9078 | [email protected]HOURSMONDAY ­ SATURDAY 9 AM ­ 6 PM ESTFlameBoss.comMyFlameBoss.com

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by