User Manual
FlinQ Wireless Bluetooth On-Ear Headphone FQC8142
Specifications:
- Bluetooth: V5.0 + EDR
- Bluetooth Protocols supported: A2DP/HS/HFP/AVRCP
- Standby Time: Up to 450 Hours max*
- Music Play Time: Up to 5-8 hours max*
- Talk Time: Up to 6 Hours max*
- Battery: 300mAh Lithium Battery
- USB charging: DC 5V IN 1000mA
- FM frequency: 87.5-108MHz
- Wireless frequency: 2.401-2.480GHz
- Wireless distance: 10 meters max
- Frequency: 20Hz-20KHz
- Speaker: 40mm
- Output power: 35mW
- Rated Power: 2x 5W
- SNR: 88dB
- Charging time: ≤2 hours
Note: * Depends on brand, phone model / type and volume settings
USER INSTRUCTIONS:
Charging mode:Use the supplied micro USB cable and connect it with the headphone’s connection. You can use any available USB power source with 5V power. The charging time is approximately 2 hours. During the charging mode the LED light will turn red. When it is fully charged, the LED is OFF.
Pairing the headphone by Bluetooth:
- Press and hold the power button 3 seconds, when the headphone is off, to power it ON.
- The blue/red LED light will turn on and flashes quickly to indicate it is ready to pair.
- Open the Bluetooth menu in your device’s Bluetooth settings
- When your mobile phone searches the headphone, the pairing name is “FlinQ Wireless On-Ear …. ”
- Press this name and it will connect automatically, no password is needed. (if a password is required please enter: 0000). After selecting the headphone you will hear “Your headphones are connected” The blue LED light will flash 2x each 5 seconds to indicate it is successful connected
Your headphones are ready to use!
Button operation instructions (make 1 – 13 clear on picture from the headphone’s button):
- To Power ON/OFF: Press and hold the POWER button around 3 seconds. You will hear an audible voice message.
- Previous song/ Volume – :• In Bluetooth mode: 1x press = Previous song, long press = Volume down• In SD Card / MP3 mode: 1x press = Previous song, long press = Volume down• In FM mode: 1x press = Previous FM Frequency, long press = Volume down
- Play/Pause: • When you receive a phone call in Bluetooth mode: 1x press = Answering the call and ending the call. Long press = Reject the call. Quickly press 2x = Last number redialing. To play/pause music = 1x press• In SD Card / MP3 mode: 1x press = Play/Pause• In FM mode: 1x press = Automatically searching the FM Frequency stations and store’s it as it was been found.
- Next song/ Volume +:• In Bluetooth mode: 1x press = Next song, long press = Volume up• In SD Card / MP3 mode: 1x press = Next song, long press = Volume up• In FM mode: 1x press = Next FM Frequency, long press = Volume up
- Mode:1x press each time to change the mode between Bluetooth mode/SD Card MP3/FM Radio and AUX line In.
Note:Restart music or FM Radio: When a call is answered the music will stop automatically. To start the music again after the call press the play button.
LED indicator:
- In Bluetooth pairing mode: The blue/red LED light will flash quickly to indicate it is ready to pair. The blue LED light will flash slowly when the headphone is successfully connected to your device.
- In SD Card / MP3 mode: The blue led light will flash slowly when activated.
- In FM mode: The blue LED light is flashing slowly when hearing the FM radio and will flash quickly when searching the FM radio stations.
SD CARD/MP3 MODE INSTRUCTIONS:
- Make sure the power is ON
- Insert an SD/TF card (max 32Gb Class 10 or higher) with MP3 music and it will start to play automatically. Or if needed press the mode key and switch to SD CARD/MP3 mode manually.
- 1x press the play button
AUX LINE-IN MODE INSTRUCTIONS:
- Insert the supplied AUX Cable and it will turn to AUX Line-In mode automatically. It will now play any audio from your connected device. If not done automatically please use the mode button to select it.
- It supports; smart(phone) devices, Ipad/Tablets/Ipod/MP4/MP3/CD/PC and other line out devices.
HIGHLIGHT NOTES:
- When the headphone’s are switched OFF and ON it will automatically reconnect to the last paired device.
- Battery indication on iOS devices.
- Audio formats supported: MP3
- Maximum volume warning: A beep will be heard through the speakers.
- Power save function: If the headphones are not successfully connected within 10 minutes, the headphones will automatically shut down.
- Inserting an AUX cable will cut off the power supply and allows for listening when low on battery.
Warning：
- Do not use the headset excessively and do not store them under heavy pressure. The headset are not resistant to heat and water.
- Keep the headset away from the WIFI router or other high-frequency equipment andwalls etc. to prevent interruption of signal reception.
- Use the headset in working range (max. 10 meters). The effect will be significantly better if there are no obstacles between the connected devices.
- Use these Bluetooth headset with any device with Bluetooth stereo function.
- The LED light turns red when charging starts.
- When using the headset again, please keep them upright when you remove them from the charging station to prevent damage.
Highlights:
- POWER ON/OFF
- SD / TF CARD
- NEXT / VOL+
- PLAY / PAUSE / ANSWER / REJECT
- MODE FOR : BT / FM / MP3 / AUX
- PREV / VOLAUX
- LINE-IN
FlinQ Wireless Bluetooth On-Ear Headphone FQC8142 User Manual – FlinQ Wireless Bluetooth On-Ear Headphone FQC8142 User Manual –
Questions about your Manual? Post in the comments!
[xyz-ips snippet=”download-snippet”]