Forney Easy Weld 298 TIG 100ST Welder User Guide
1. Read user manual
2.
3. Connect TIG torch and ground clamp
4. Connect TIG torch lead to gas (100% Argon)
5. Adjust amperage per material thickness
6. Connect to Input Power
- Generator OK with continuous output ≥ 4,000 W
- Extension cord: #12 AWG or larger; 25′ (8m) or shorter
7. Initiate the arc with a scratch or lift technique when in contact with the metal
ELECTRODE IS ALWAYS ELECTRICALLY HOT WHILE IN TIG MODE
FIND TIG WELDING TIPS AT WWW.ASKFORNEY.COM
TIG TROUBLESHOOTING TIPS
1. Read user manual
3. Connect electrode holder and ground clamp according to desired polarity
4. Connect to Input Power
- Generator OK with continuous output ≥ 4,000 W
- Extension cord: #12 AWG or larger; 25′ (8m) or shorter
5. Adjust amperage per settings chart on the welder
6. Recommended electrodes
STICK TROUBLESHOOTING TIPS
QUESTIONS OR TROUBLE? Contact Forney Industries at 1-800-521-6038 [email protected] · askforney.com · forneyind.com
References
[xyz-ips snippet=”download-snippet”]