LUT7 7″ 3D LUT Touchscreen Monitor
7 3D LUT Touchscreen Monitor 2200nits Daylight ViewableUser Manual
Product Overview Thank you for purchasing our Full HD LCD monitor, which adopts advanced integrated digital signal processing circuits and professional IPS LED panel, which makes it high brightness, low power consumption, stable performance, etc. This monitor has SDI (optional), HDMI input and output, auxiliary power output, touch screen menu operation and support user 3D LUT upload and other features. It has small size, simple operation, portable convenience and wide application range. Advanced features include Parade, Vector, Histogram, Audio Meter, Focus Assist, False Color, Zebra Exposure, Pixel to Pixel, Center Marker, Safety Marker, Marker Mat, Monochrome, Image Freeze, Zoom, Anamorphic etc. It is an ideal, portable and lightweight viewfinder and video monitor. The monitor is equipped with a battery plate; you can use the power adapter supply or use the external battery for power supply.To insure the best use of the unit, please read the user’s manual carefullyCAUTIONPlease avoid the heavy impact and drop onto the ground when move the product.The screen of this product is made of glass. Please do not drop the screen towards the ground. Keep away from injury if the screen is broken.Keep the product away from the heat source, and avoid the prolonged exposures to the sun as the LCD screen will be damaged.1
To avoid damaging the product, please do not take apart or repair the unit by yourself without the adjustable components in the unit.In order to better maintain the LCD screen and protect the cover, please follow the following ways to avoid damages. 1. Please refrain from using the hard objects to hit the screen. 2. Please do not force to wipe the screen. 3. Please do not use the chemical solutions to clean the screen. 4. Please do not spray any detergent on the screen. 5. Please do not write on the screen directly. 6. Please do not stick on the screen. 7. Please simply wipe with a clean soft cloth and make sure no water on the screen.2
FeaturesTouch screen menu operation Support 3D LUT Log to REC.709 and user 3D LUT upload 1920×1080 full HD IPS screen 2200nits Daylight Viewable (Light Sensor) All Waves display, Parada, Vector, RGB Histogram functions Histogram is a quantitative tool to inspect the image brightness,to guide the exposure control Focus Assist (red, green, blue, white, yellow five peaking colorsoptional) Audio Meter Zebra and False Color function, convenient to guide the usinglight when shooting and the post production Monochrome (gray, red, green, blue) Image Zoom-in function Anamorphic Mode Image Flip H and Flip V Image Freeze Pixel to Pixel Marker Mat, Center Marker and Safety Marker Brightness, Contrast, Sharpness, Hue, Saturation and ColorTemp Adjustment. Stereo Earphone output DC 8.4V power out to power your DSLR camera or mirrorlesscamera3
CONTENTS1. Product Description —————————————– 5 1.1 Button Instruction ——————————————— 5 1.2 Port Instruction ———————————————— 6 1.3 Power Supply Way ——————————————- 7 1.4 Mount Points ————————————————— 8 2. Menu Operation Instruction ——————————- 9 3. Menu Function Instruction ——————————– 11 4. Technical Parameters ————————————— 16 5. Trouble Shooting ——————————————— 174
1. Product Description 1.1 Button Instruction
. Indicator Light: After connecting the power, the indicator light
is on (red). Long Press
button to turn on the monitor, it
turns yellow. After the signal is connected, it turns green.
. MENU: See details: 3.1 MENU Wheel Menu Operation in 3.
Menu Operation Instruction.
. Light Sensor: The backlight mode under the icon
is set
to Auto, and the brightness of the backlight can be adjusted
automatically by the light sensor.
. F1 ~ F3: Custom function buttons5
1.2 Port Instruction
. Dual F970 Battery Plates
. DC 12V Power Input
. Power / Touch Function ButtonLong press to turn on / off; short press to turn on / off the screen touch function.. 3.5mm Headphone Jack
. DC OUT 8.4V Power OutputConnect the optional dummy battery cable to power camera.. SDI OUT (Optional)
. HDMI IN
. SDI IN (Optional)
. HDMI OUT
. SD Card Slot3DLUT upload via SD card and for firmware upgrade
6
1.3 Power Supply Way (1) The rear cover of the monitor is equipped with dual F970 batteryplate, which is applicable to F970 series of batteries. Sony F970 battery plate for battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 QM91D QM91 QM90D QM90 QM71D QM71 QM70D QM70 QM51D QM51 FM71 FM70 series Remark: Different specifications of the battery have different capability. The working time for the monitor will be different. Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor in a long time.(2) DC IN 12V: DC power input, polarity as the input power , Barrel (5.5mm outer, 2.1mm inner) at the bottom of themonitor, DC 7~24V Input.(3) DC OUT 8.4V: DC power output interface, polarity as the output power Barrel output for powering your camera with a separately available DC coupler via adaptor (NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming soon.7
1.4 Mount Points There are (3) ¼-20 thread points (top, bottom, & right side) can be easily connected to the hot shoe mount, tripod fixed installation.Tilt Arm Mounting The monitor secures to your camera using the included Tilt Arm via shoe mount or 1/4″-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, LED light, or wireless receiver) that would otherwise be displaced from the camera’s accessory shoe.8
2. Menu Operation Instruction
After the monitor is properly connected to the power supply, the
indicator light is on (red). Long press
button to turn on
the monitor, the indicator light turns yellow. After the signal is
connected, the indicator light turns green.
After startup, short press
to select to turn the screen
touch function on or off.
2.1 Touch Screen Menu Operation (turn on the screen touch
function)
Double-click on the screen to open the main menu (show on the
left side of the screen) and click on the corresponding menu to
display the secondary menu. You can enter the corresponding
function option to select or set with the “<” or “>” key of the
option. Exit the menu and press
key of the main menu
or click the touch screen. When the menu is not displayed, swipe up from the bottom ofthe screen to open the shortcut menu, and click on the corresponding menu box to open or set the corresponding function. When the menu is not displayed, on the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight; on the right side of the screen (1/2 split screen), you can directly adjust the volume.
9
Figure:
2.2 MENU Wheel Menu Operation
When the menu is not displayed, directly rotate the wheel to
backlight or brightness adjustment. The wheel option can be
set to backlight or brightness in the menu
.
Long press the MENU wheel to open the main menu (on the left
side of the screen). Rotate the wheel to select the secondary
function menu. After selecting it, press the wheel, then rotate
the wheel to select or set the option function.
Short press the MENU wheel to open the shortcut menu (below
the screen), rotate the wheel to select the shortcut menu option,
press the wheel to directly turn on/off the function, if you press
the parameter selection, repeat the above operation. The
shortcut menu will automatically exit after about 5 seconds
without operation.
10
3. Menu Function Instruction
Focus AssistZebra Monochrome False ColorReturn
OFF, ON After the Focus Assist is turned on, the Focus Level (110) and Focus Color (yellow, red, green, blue, white) can be adjusted. OFF, ON After the Zebra is turned on, the Zebra Value (1%100%) can be adjusted. OFF, gray, red, green, blue OFF, type 1, type2 Back to the previous OSD menu
Nine Grid Safety Marker Center MarkerMarker MatMarker Color Return
OFF, ON OFF, 70%, 80%, 90%, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1 OFF, ON OFF, 16:9, 16:10, 4:3, 1.85:1, 2.35:1 After the Marker Mat is turned on, the Marker Mat Alpha (0%, 25%, 50%, 75%) can be adjusted. yellow, red, green, blue, white, black Back to the previous OSD menu
11
Scan ModeVideo AspectAnamorphic Mode Flip H Flip VZoom Times FreezePixel to Pixel Return
Under Scan, Over Scan auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, stretch, user Under the “user”, you can customize the Video Width (100% ~ 200%), Video Height (100% ~ 200%) OFF, 1.25x, 1.33x, 1.5x, 2.0x, 2.0x mag OFF, ON OFF, ON OFF, 100%300% OFF, ON OFF, ON Back to the previous OSD menu
All Waves Parada VectorRGB Histogram Histogram Audio Meter Return
OFF, ON OFF, RGB, YUV, Y OFF, ON OFF, ON OFF, ON OFF, ON Back to the previous OSD menu
12
Lut SwitchLut Import (SD)ColortempBacklight ModeBrightness Contrast Saturation Hue Sharpness Return
OFF, ON The Lut item is displayed after the Lut Switch is turned on. After the Lut Switch is turned on, the Lut (SLOG2, SLOG3, LOGC, VLOG) can be adjusted. After copying the 3D LUT file to the SD card and inserting it into the SD card slot, you can click the “<” or “>” key in the Lut (SD) option, or rotate the wheel to import the 3D LUT file. 5600K, 6500K, 9300K, user Under the “user”, the red, green, and blue values of the image can be adjusted. manual, auto Under “Manual”, the Backlight (1 100) can be adjusted manually. Under “Auto”, the brightness is automatically adjusted by the light sensor. 0100 0100 0100 0100 0100 Back to the previous OSD menu
13
WheelF1F2F3 Language OSD Alpha
Backlight, Volume, Zoom Times After selecting the wheel option, you can click the “<” or “>” button in the wheel option, or rotate the wheel to select one of the shortcut keys to set it to the rotary wheel adjustment (when the menu is not displayed). Mute, Nine Grid, Safety Marker, Center Marker, Marker Mat, False Color, Lut Switch, Parade, Vector, RGB Histogram, Histogram, Audio Meter, Monochrome, Focus Assist, Zebra, Scan Mode, Video Aspect, Anamorphic Mode, Flip H, Flip V, Freeze, Pixel to Pixel Input, Nine Grid, Safety Marker, Center Marker, Marker Mat, False Color, Lut Switch, Parade, Vector, RGB Histogram, Histogram, Audio Meter, Monochrome, Focus Assist, Zebra, Scan Mode, Video Aspect, Anamorphic Mode, Flip H, Flip V, Freeze, Pixel to Pixel All Waves, Nine Grid, Safety Marker, Center Marker, Marker Mat, False Color, Lut Switch, Parade, Vector, RGB Histogram, Histogram, Audio Meter, Monochrome, Focus Assist, Zebra, Scan Mode, Video Aspect, Anamorphic Mode, Flip H, Flip V, Freeze, Pixel to Pixel , English, , Deutsch, Français, Italiano, Español, , P OFF, low, middle, high14
OSD Time 5s, 10s, 15s, 20s, 25s, 30s, always
Volume
0100
Mute
OFF, ON
After selecting the reset option, you can click the
Reset
“<” or “>” key in the reset option or rotate the wheel
to restore the factory settings.
Input
HDMI, SDI
After copying the update file to the SD card and
inserting it into the SD card slot, you can click the Firmware Update“<” or “>” key in the firmware update option or
rotate the wheel to update.
Return
Back to the previous OSD menu
Exit the menu
15
4. Technical Parameters
Panel Size
7″ touch screen
Resolution
1920 × 1200 pixels
Dot Pitch
0.07875 (H) x 0.07875 (W) (mm)
Aspect Ratio Brightness
16:10 2200cd/m2 (Light Sensor)
Contrast
1200:1
Viewing Angle
80°/80°(L/R) 80°/80°(U/D)
Backlight
LED
Adjustable Backlight Manual, Auto
Input
SDI (Optional), HDMI
Output
SDI (Optional), HDMI
Audio Power Out
3.5mm Stereo Headphone, Speaker DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera)
SDI Support Format
720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p (60/59.94/50/30/29.97/25/24/23.98)
HDMI Support FormatPower Input Voltage Power Consumption
480i/480p/576i/576p 720p (60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50 1080p (60/59.94/50/30/29.97/25/24/23.98) 3840×2160p (30/29.97/25/24/23.98) 4096×2160p (24Hz) 724V 20W
Unit Size
190Lx126Hx27D (mm)
Unit Weight
460g
Mount Points Working Temperature Storage Temperature
(3) ¼-20 thread points (left, right, bottom) -2050 -3060
16
report this ad5. Trouble Shooting 5.1 Only black and white or monochrome picture:please check saturation, brightness & contrast adjustment. Please check “Monochrome” is in black, white or monochromeimage or other condition. 5.2 NO Image after put on the power Check if signal cable connecting is in good condition. Check signal cable connecting, and make sure to use thestandard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged. 5.3 Earphone No sound Check if Volume control do not open, press the volume button, and try to increase the volume.If there are still other problems, please contact with our related technologists.As we are improving product features and product performance, so if there is any change on the specification without prior notice.17
[xyz-ips snippet=”download-snippet”]