FRESH N REBEL 3EP700DP Twins2 true Wireless Bluetooth Earphones User Guide
FIND THE FULL MANUAL IN YOUR OWN LANGUAGE ON OUR WEBSITEwww.freshnrebel.com
FIRST TIME PAIRING
Press and hold the reset button for 5 seconds before connecting your device for the first time to your Twins2 (Tip).After resetting, simply open the charging case, turn on Bluetooth on your device and wait 5 seconds. The Twins2 (Tip) will appear on your device and you can connect via Bluetooth.
Every next time you take the earbuds out of the charging box, they will automatically turn on and connect to your phone within seconds. When you put them back, they will disconnect and turn off.
TOUCH CONTROLS EN
LED BEHAVIOUR
Earbuds
- Blinking very slowly → Connected
- Blinking → Earbuds are reconnecting to each other
- Blinking very fast → Searching for connection
Case (outside)
- Blinking very slowly → charging with cable or wirelessly
- Off → done charging/not charging
Case (inside)
- Battery indicator:
1 LED –blinking – Case needs to be charged1 LED – 0-25% – Battery remaining in case2 LEDs – 25-50% – Battery remaining in case3 LEDs – 50-75% – Battery remaining in case4 LEDs – 75-100% – Battery remaining in case
FEATURES
FAQ
What is Double Master?
- The Double Master functionality means that both earbuds have a built-in microphone, so you can use the earbuds individually (either the right or the left one) or both of them as a pair for stereo sound.
- Single Master means you can use only the right earbud individually or the right and left earbuds together. You can never use the left earbud separately from the right earbud.
I can’t seem to get touch control to work, what should I do?
- Aim for the LED and try touching with a bit more force.
My earbuds don’t turn off automatically when I put them back in the charging case, what can I do?
- Is 1 LED blinking inside the charging case? Then the battery level of the case is too low to connect to the earbuds and automatically turns them off. Charge the case and the issue will be solved.
One of my earbuds doesn’t work anymore, what can I do?
- Put the earbuds back in the charging case, close the case and wait 10 seconds before trying again.
How can I reset my Twins2 (Tip)?
- Hold the reset button until the outside LED is blinking 3 times. Your Twins2 (Tip) will reset.
Hereby, Sitcom declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.freshnrebel.com Operating frequency band: 2400 to 2483.5
freshnrebel.com#freshnrebelKeep in touch:
References
[xyz-ips snippet=”download-snippet”]