FRESH N REBEL Base Wireless Charger Duo Pad User Manual

BASE DUO DOUBLE WIRELESS CHARGING PADUSER MANUAL

Hereby, Sitecom declares that this product is in compliance with the applicable EU Regulations.The full text of the EU declaration of conformity is available at the following internet address: www.freshnrebel.comFRESHNREBEL.COMFIND THE MANUAL IN YOUR OWNLANGUAGE ON OUR WEBSITE

IMPORTANT SAFETY INSTRUCTIONS

  • Do not throw, drop, shake and avoid strong blows and collisions
  • Do not disassemble or modify
  • Do not cover with objects which may affect heat dissipation
  • Do not expose to liquids
  • Do not use or store in damp, humid or wet environments
  • Do not expose to excessive heat
  • Do not burn or incinerate
  • Do not use near strong magnetic fields, inflammable materials or explosive gases
  • Do not place metal objects on the wireless charging zone
  • Do not place cards with magnetic stripes and chips on the wireless charging zone
  • Do not use close to (implanted) medical devices such as a pacemaker; keep a distance of at least 25cm
  • Only use the included cable or cables included with your device
  • Only use the included USB Wall Charger
  • Only use Qi-Certified devices for charging on the Wireless Charging zone

SPECIFICATIONS

  • 2 x 10W Wireless Charging Pad
  • 5 Charging Coils
  • Qi-certified (version 1.2.4)
  • USB-C Input: 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A
  • Output modes: 5W, 7.5W, 10W
  • Wireless Output 1: 5V/1A, 5V/1.5A, 9V/1.1A
  • Charging Sensing Distance ≤ 8 mm
  • Status indication LED
  • 30W USB-C PD Wall Charger
  • 1.5 m USB-C to USB-C Cable
  • Wireless Output 2: 5V/1A, 5V/1.5A, 9V/1.1A

FEATURES

  • 2 x 10W Wireless charging
  • Fast Charging: charge up to 40% faster
  • Supports 5W / 7.5W / 10W wireless charging
  • 5 Charging coils for easy positioning
  • Charges through most cases under 3 mm thick
  • Foreign Object Detection protection
  • Overcurrent and overload protection
  • Overheating and short circuit protection

BOX CONTENT

  • Base Duo Double Wireless Charging Pad
  • 30W USB-C PD Wall Charger
  • 1.5 m USB-C to USB-C Cable
  • Quick Install Guide

SYSTEM REQUIREMENTS

  • Qi-enabled device
  • 30W USB PD Wall Charger (included)
  • USB-C to USB-C Cable (included)

If you use a protective case for your smartphone, please note that wireless charging only works with non-metal cases, without any magnetic parts, up to 3mm thick.

HOW TO USE YOUR DUO WIRELESS CHARGING PAD

OVERVIEW

LED BEHAVIOUR

ACTION

LED 1 & LED 2
Connect power / boot Colour: whiteLight fades in slowly  → duration: 1 secondLight stays on → duration: 3 secondsLight fades out  → duration: 1 second
Foreign Object Detection Colour: white blinking rapidly
Power or other failures Colour: white blinking rapidly
Placing and charging  Qi device Colour: whiteLight fades into full brightness → duration: 1 secondThe light stays on in full brightness → duration: 3 secondsLight fades to 20% brightness → duration: 2 secondsThe light stays on at 20% brightness when charging is in progress
Qi device fully charged Colour: whiteLight fades from 20% in to full brightness → duration: 1 secondThe light stays on in full brightness → duration: 2 secondsLight fades out → duration: 1 second
Qi device removed when not fully charged Colour: whiteLight fades from 20% in to full brightness → duration: 1 secondLight fades out → duration: 2 seconds

SETUP

CHARGING

FULLY CHARGED

PRECAUTIONS

Copyright 2020 Sitecom Europe B.V. All rights reserved.Qi and the Qi symbol are trademarks of the Wireless Power Consortium.Apple is a trademark of Apple Inc.Samsung is a trademark of Samsung Electronics Co., Ltd.All other brands, logos, product names and trademarks are property of their respective owners.PRODUCT NUMBER: 4CP200 v1 001

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,