frisco 238153/238154 42″ Heavy Duty Faux Fur Cat Tree Instruction Manual

CAT TREEINSTRUCTION MANUAL

SKU# 238153,238154OVERALL DIMENSIONS34.5 in Lx 18.7 in Wx48 in H87.5cmLx47.5 cm Wwx 122 cm HBASEBOARD DIMENSIONS29.25 inLx 18.7 in W74cmLx47.5cm W

WARNINGS & CAUTIONS

PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.

  • Keep all tools and instructions in a safe place for future reference.
  • Follow the instructions carefully and make sure you’ve completed each step.
  • This cat tree is intended for cat use only, please keep children away.
  • Keep all small parts away from children/pets to avoid choking hazards.
  • Never climb, rock, shake, step or hang on the cat tree.
  • Place your cat tree indoors, away from direct sunlight or damp areas.
  • Cat trees should be placed on a flat, level surface for stability.
  • Check your cat tree often for loose screws or parts that might need re-tightening.
  • If your cat tree gets torn or damaged, please discard it.
  • The product photo may vary slightly from your fully assembled cat tree as this product is continually being enhanced.

CLEANING INSTRUCTIONS

Spot clean stains and vacuum fur (using small handheld or attachment) when necessary.

COMPONENTS

Prior to assembly, be sure to identify and sort all components shown below.

ASSEMBLY INSTRUCTIONS

STEP 1

For easier assembly, insert all 3 posts inside to frame the apartment from each corner.Use the wrench key to locate and align the holes between the apartment board and post, then loosely attach the screws at both ends without completely tightening. Repeat for all corners. Then, tighten all 6 screws to finish apartment assembly.

STEP 2

STEP 3

STEP4

STEP 5

FULL ASSEMBLY

[xyz-ips snippet=”download-snippet”]


Posted

in

by