FUSION Panel-Stereo Audio Entertainment Bluetooth Audio Streaming Owner’s Manual

FUSION Panel-Stereo Audio Entertainment Bluetooth Audio Streaming

FUSIONENTERTAINMENT.COM

© 2018 Garmin Ltd. or its subsidiariesAll rights reserved. Under copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without the obligation to notify any person or organization of such changes or improvements. Go to www.fusionentertainment.com for current updates and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, FUSION®, and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.

AndroidTM is a trademark of GoogleTM Inc. Apple® and the Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc., registered in the U.S. and other countries. The trademark iPhone® is used in Japan with a license from Aiphone K.K. Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Other trademarks and trade names are those of their respective owners.

Getting Started

WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information.FUSION® Panel-Stereo Controls

www.fusionentertainment.com

FUSION Panel-Stereo USB Port

(1) USB port for your mobile device connection or a low-profile USB flash drive. Charges your mobile device.(2) Weather cap. When properly closed, this cap provides a cover that is water-resistant to IPX5.

Connecting Devices

Connecting a Compatible Bluetooth Device to the StereoYou can play media from a compatible Bluetooth device using the Bluetooth wireless connection. You can control the music playback with the media app on a Bluetooth device or using the FUSION-LinkTM remote control app. For information about the FUSION-Link app for compatible Apple or AndroidTM devices, go to the Apple App StoreSM or the Google PlayTM store.

  1. Enable Bluetooth on your compatible Bluetooth device.
  2. Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
  3. On the stereo, press and hold until you hear Discoverable and flashes blue. The stereo remains discoverable for two minutes.
  4. On your compatible Bluetooth device, select Panel-Stereo from the list of discovered devices. turns solid blue when the device is connected to the stereo.
  5. If your compatible Bluetooth device does not connect to the stereo, repeat the above steps.
  6. If you want to stream Bluetooth audio, select the Bluetooth source on the stereo. NOTE: The FUSION-Link app works for any audio source, but you must select the Bluetooth source on the stereo to stream audio.
  7. Play music using your Bluetooth device.NOTE: remains solid blue when a Bluetooth device is connected to the stereo, regardless of the selected source.

Immediately after the stereo is turned on, it connects automatically to the last connected device when it is within range and Bluetooth wireless technology is enabled. You can connect a previously paired Bluetooth device by selecting Panel-Stereo from the Bluetooth device’s list of previously paired devices.

Connecting a Compatible USB Device to the StereoYou can connect a compatible USB flash drive, compatible Apple device, or compatible Android AOA device to the USB port to play music and charge compatible Apple or Android devices.The FUSION-Link remote control app is required to navigate folders on the USB flash drive. When using a USB flash drive without the FUSION-Link app, the stereo plays music files saved in the root directory by default. If the FUSION-Link app has been previously used to navigate to a different folder on the USB drive, the stereo plays music files from the last folder navigated to.When using a USB flash drive, the file load time varies based on the size of the flash drive and the number of files on the flash drive.

  1. Connect the USB flash drive or the USB cable included with your media player to the USB port on the stereo.
  2. If you want to stream Bluetooth audio, select the Bluetooth source on the stereo. NOTE: The FUSION-Link app works for any audio source, but you must select the Bluetooth source on the stereo to stream audio.
  3. Play music using the connected USB device. When an unsupported USB device is connected, the stereo beeps to indicate the error.

One beep– Unsupported hub attachedTwo beeps – Unsupported USB device attachedThree beeps– Device not respondingFour beeps– Unsupported USB device attached that exceeds the 1 A charging rating of the stereo

USB Flash Drive SizeThe weathering cap should be sealed on the device to avoid corrosion.To ensure the weather cap can be properly inserted and locked, you must use a low-profile USB flash drive that is no longer than 22 mm (0.86 in.), measuring from end to end.The optional FUSION MS-USB16 accessory is a low-profile, 16 GB flash drive, and is the correct size to allow the weather cap to be closed and sealed.

(1) 22 mm (0.86 in.) maximumFUSION-Link Remote Control AppYou can use the FUSION-Link remote control app on your compatible Apple or Android device to adjust the stereo volume, change the source, control playback, select and manage radio presets, and adjust some stereo settings.The app communicates with the stereo using a wireless connection to the mobile device. You must connect your compatible device to the stereo using Bluetooth or WiFi® technology to use the app.For information about the FUSION-Link remote control app for compatible Apple or Android devices, go to the Apple App Store or the Google Play store.

Connecting a Garmin® Watch to the StereoFor a list of compatible Garmin watches, go to www.fusionentertainment.com.

For more information about the watch, see the watch manual at www.garmin.com/manuals.

  1. Following the instructions in the watch manual, install the FUSION-Link LiteTM app from the Connect IQTM store onto the watch.
  2. On the stereo, press and hold until you hear Discoverable and flashes blue. The stereo remains discoverable for two minutes.
  3. Bring the watch within 3 m (10 ft.) of the stereo.NOTE: Stay 10 m (33 ft.) away from other ANT® devices while pairing.
  4. Open the FUSION-Link Lite app on the watch. The first time you open the app on the watch, the watch automatically pairs with and connects to the stereo. If you need to pair to another stereo, in the FUSION-Link Lite app, select Settings > Pair new.
  5. Control the audio playback using the FUSION-Link Lite app on the watch.After the devices are paired, they connect automatically when they are turned on, within range, and the app is open on the watch.

More Information

Installing a Different Language for the Voice PromptsYou can change the language of the voice prompts. Choose from English, Dutch, French, German, Italian, Spanish, Japanese, and Chinese.

  1. Go to www.fusionentertainment.com.
  2. Follow the on-screen instructions.

Specifications

*IP rating does not include rear connectors.

Stereo CareNOTICE Avoid extreme shock and harsh treatment because it can degrade the life of the stereo.Do not use a sharp object to clean the stereo.Avoid chemical cleaners, solvents, sunscreen, and insect repellents that can damage plastic components and finishes.Thoroughly wipe the stereo with fresh water after exposure to chlorine, saltwater, sunscreen, cosmetics, alcohol, or other harsh chemicals. Prolonged exposure to these substances can damage the case.Do not store the stereo where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.

Registering Your FUSION Panel-StereoHelp us better support you by completing our online registration today.

Troubleshooting

My stereo does not respond to my key presses

  •  Press and hold for 10 seconds to reset the stereo. If necessary, press to turn the stereo back on.

I cannot hear the audio well or at all

  • Check the volume setting on the connected device.
  • Select a valid source for the stereo.
  • Make sure the stereo is not muted or paused.
  • Make sure the stereo is connected to power.
  • Make sure the external AM/FM antenna is connected and positioned to receive broadcast signals.

The USB drive will not play

  • Make sure the drive is formatted as FAT32.
  • Make sure the tracks are in MP3 format and are saved in the root directory
  • Use the FUSION-Link app to navigate the USB folders.
  • Make sure the music is not paused.

FUSION SUPPORT

New Zealand 09 369 2900Australia  1300 736 012Europe  +44 (0) 370 850 1244USA  623 580 9000Pacific  +64 9 369 2900

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,