QUICK INSTALLATION GUIDE
MARS M 1MID-TOWER PC CAS EM1
SPECIFICATIONS
SERIES | ALUMINUM Series |
Product Name | MARS M1 |
Case Type | MID Tower |
Dimension (L x W x H) | 402 x 210 x 475 mm15.8 x 8.3 x 18.7 inch |
Chassis Dimension (L x W x H) | 360 x 210 x 458 mm14.2 x 8.3 x 18 inch |
Motherboard Support | ATX, Micro-ATX,Mini-ITX |
Expansion Slots | 7 |
Material | SPCC , ABS , Tempered glass , Aluminum |
Window | Left |
Radiator Support | Top: 280 mmFront: 280 mmRear: 120 mm |
Fan Support | Top: 2 x 120mm , 2 x 140mmFront: 3 x 120mm , 3 x 140mmRear: 1 x 120mm |
Pre-installed Fans | Rear: 1 x 120mm Fan |
Pre-installed Control BOX | NO |
Motherboard Sync | 5V 3-Pin Addressable Header |
Drive Bays | 2 x 3.5″ or 2 x 2.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 2 x 2.5″ |
Clearance | CPU cooler height limitation: 160mmVGA length limitation: 340mmPSU length limitation: 170mm |
I/O Port | USB 3.0 x1, USB 2.0 x2,HD Audio x1, LED Control x1 |
EXPLODED VIEW & PARTS
PARTS
0. Chassis Body1. Screw2. Tempered Glass Side Panel3. Right Side Panel4. Top Dust Filters | 5. Anodized Aluminum Front Panel6. LED Strips7. IO Port8. HDD Cage9. Rubber Foot |
ACCESSORY
Figure | Parts Name | Qty | Used for |
Stand-off 4.75 x 6.5 x 10mm | 3 | Motherboard | |
Screw #6 x 6 mm | 8 | PSU | |
Screw #6 x 5 mm | 8 | HDD | |
Screw M3 x 5 mm | 26 | 2.5″ HDD/Motherboard/ODD | |
CableTie | 5 | Cable Management | |
Buzzer | 1 | Motherboard Alarm |
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassisInstall the motherboard in the proper location and secure it with screws
PSU INSTALLATION
Place the PSU in the proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDDAlign the HDD into the mounting holes and screw in.B. 2.5″ SSDAlign the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
Top | 2 x 120mm or 2 x 140mm |
Front | 3 x 120mm or 3 x 140mm |
Rear | 1 x 120mm |
RADIATOR COMPATIBILITY
Top | 280 mm |
Front | 280 mm |
Rear | 120 mm |
I/O PORTS
1. Power Button2. Reset Button3. USB 3.04. USB 2.0 | 5. USB 2.06. Headphone7. Mic8. LED Control¹ ² |
- Sync With Motherboard: Press and Hold the LED Control Button for 3 seconds.
- LED off: Press and Hold the LED Control button for 3 Seconds(if you have not installed the MB Sync).
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
[xyz-ips snippet=”download-snippet”]