GARMIN 2021 Pilot Training Catalog Instruction Manual

Table of Contents

GARMIN 2021 Pilot Training Catalog Instruction Manual

PILOT TRAINING CATALOG OVERVIEW

The Garmin Aviation Training team is excited to announce our 2021 pilot training opportunities. Garmin will continue with our virtual training options through June 2021 and then we intend to resume in-person training in August at our Garmin Headquarters in Olathe, Kansas. The health and safety of our customers and associates remain paramount to Garmin. If the pandemic continues into the fall, we will communicate options in advance to all registered attendees and again increase virtual training options.This training catalog provides information on pilot training options, including a description of selfstudy materials, eLearning courses and instructor-led training offered for the GTNTM, G500/G600, G500/G600/G700 TXiTM, G3X TouchTM and Garmin integrated flight decks. The Aviation Training team provides comprehensive instruction for Garmin’s most advanced avionics currently being installed in general aviation, business aviation, and helicopter, military and experimental aircraft.Our goal is for pilots to achieve the highest level of confidence while operating their Garmin avionics. We intend to teach all pilots the full capabilities of their avionics systems and offer insight on the preferred methods of operation and integration. Garmin pilot guides, PC trainers and eLearning courses provide foundational knowledge about the equipment. Our virtual training courses build on this knowledge and experience, using scenario-based training and interaction through trainers. The following trainers are downloadable: GTN, G500/G600, G500/G600/G700 TXi and GPS navigators. Some G1000® NXi trainers are available for purchase and installation. We also provide hands-on kiosk experience with our in-person training classes. These training opportunities will help pilots integrate Garmin avionics capabilities into their flight experience.

Your Garmin Pilot Training TeamThe Garmin Pilot Training team comprises highly experienced instructors with diverse backgrounds. The instructors have experience in Part 61 and Part 141 training environments, corporate flight departments and airlines, as well as military flight operations training to include initial, transition and tactical instruction. Each has instructor experience operating Garmin avionics and in teaching the transition from analog instruments to technically advanced aircraft. The instructors have immediate access to the entire Garmin team of engineers, flight test personnel, pilot operations specialists, field support specialists and OEM support experts.

PRICING AND WINGS CREDIT

ELearning Courses
Course	Duration	Price
GTN™ Essentials 2.0	3 hrs	$124.95
TXi™ Essentials	2 hrs	$49.00
G1000H™ NXi Fundamentals	3 hrs	$74.95
G1000H NXi Advanced-IFR	5 hrs	$94.95
G1000® NXi Fundamentals	3 hrs	$94.95
G1000 NXi Essentials	5 hrs	$145.95
G3000®	5 hrs	$249.00
G5000® Essentials 2.0	3 hrs	$499.00
G5000 Essentials 2.0 PLUS	3 hrs	$549.00
Aviation Weather Radar 2.0	2 h	$149.00

Instructor-led Training
Class	Virtual	In-person`
Duration	Price	Duration	Price
GTN Only	1 day	$495.00	1.5 days	$550.00
GTN and Flight Display	1 day	$625.00	2 days	$700.00
G1000 and G1000 NXi	1 day	$700.00	2 days	$825.00
Aviation Weather Radar	0.25 days	Learn more	0.25 days	Learn more

We are pleased to announce that our eLearning and instructor-led training classes are eligible for WINGS credit. WINGS credit will be automatically added, on a biweekly basis, to those who finish 100% of the eLearning course and/or pilot training class.Note: FAA Safety email and fly.Garmin.com® email must be the same. If different emails have been used, please send an email to aviation.[email protected] with the subject line “WINGS Credit.”For more information on the WINGS Pilot Proficiency Program, please visit the FAA Safety website: https://www.faasafety.gov/wings/pub/learn_more.aspx.

SELF-STUDY

Pilot’s guides and PC/iPad® trainers provide information that establishes the foundation upon which the eLearning and instructor-led training are developed and delivered. In order to get the most out of your training experience, Garmin recommends becoming familiar these resources before and during the training classes and courses.Pilot’s Guides: Provide detailed information on the features, functions and capabilities of the specific avionics equipment the pilot must know when flying the aircraft. Garmin provides pilot’s guides for all retrofit installations, including the GTNTM and G500/600, and G500/G600/G700 TXiTM. Garmin-provided pilot’s guides are available for free electronic download.Pilot’s guidesfor integrated flight decks such as the G1000®, G3000® and G5000® are provided by the specific aircraft manufacturer. Computer (PC) and iPad Trainers:Garmin offers a limited number of PC trainers that simulate the behavior of the avionics system interface on your PC. This provides a convenient way to learn the basic operation of the system. The PC trainer provides a great way to practice avionics operation prior to flight and periodically refresh your skills. Current PC trainers can be found at www.garmin.com and the GTN and TXi iPad trainers are available from the App Store®. Please note that PC trainers for legacy systems are no longer available due to computer operating system interoperability issues. For G1000, G3000 and G5000 system PC trainers not available on www.garmin.com, contact the specific aircraft manufacturer.

eLEARNING COURSESTake full advantage of the features and capabilities of your Garmin device with Garmin eLearning, which provides in-depth instruction so you are better prepared and confident for your flights. The eLearning courses will guide you through scenarios to help build your understanding, proficiency and confidence with the Garmin avionics systems. Access the courseware immediately using a computer, tablet or smartphone with internet access. Garmin eLearning is available as a two-year subscription and Garmin eLearning receives periodic updates ensuring the most recent avionics software versions are available.Purchase the following eLearning courses at www.fly.garmin.com/training

GTNTM Essentials 2.0Provides in-depth instruction to include system fundamentals, flight planning, approaches, scenarios and more. Completing this course enables a pilot who is new to the system or in need of a refresher to complete standard tasks encountered during a flight with a high level of competency and confidence. Attendees of an instructor-led GTNTM class will receive free access to this course.
TXiTM EssentialsProvides instruction on the fundamental operation of the primary flight display, multifunction display and other system features. Completing this course enables a pilot who is new to the system to complete standard tasks encountered during a flight with a high level of competency and confidence.
G1000® NXiFour comprehensive eLearning courses to choose from that provide in-depth training on the G1000 NXi are available. Selections include G1000HTM NXi Fundamentals (VFR) and G1000H NXi Advanced IFR-focused helicopter courses, a G1000 NXi Fundamentals course for fixed-wing piston aircraft, and an G1000 NXi Essentials course that focuses on high-performance piston and turbine engine fixed-wing aircraft. These courses enable effective use of the significant situational awareness and decision-making resources within these systems. Attendees of an instructor-led G1000/G1000 NXi class will receive free access to one of these courses.
G3000® Essentials CourseeLearning course provides introductory instruction on the operation and user interface to include flight planning and approaches.
G5000® Essentials 2.0 and 2.0 PLUS CourseseLearning courses providing instruction on the operation and user interface to include flight planning, approaches, vertical navigation (VNAV) and more.The G5000 Essentials 2.0 PLUS course includes a separate autothrottle module and describes autothrottle usage during the course scenario.
Aviation Weather Radar 2.0This course goes beyond the weather radar sections in the pilot’s guide to help you understand weather radar fundamentals, the complementary capabilties of the weather radar and NEXRAD, and helps you improve your technique and maximize the capabilties of the Garmin GWXTM 70, GWXTM 75 and GWXTM 80 systems.

MONTHLY CUSTOMER ONE-HOUR WEBINARS

We are pleased to provide monthly one-hour, scenario-based webinars for our various Garmin avionics at no cost to you. You will enjoy exploring avionics setups, flight planning, navigation and other features with our pilot trainers. For the your convenience, we offer three different start times each month: 7 a.m. CT to better accommodate Europe and Africa, 10 a.m. CT for North and South America, and 7 p.m. CT to better accommodate Australasia. Click the desired date/time to register for the webinar.

Garmin GTNtm and TXi Scenario-based TrainingWednesday, Jan. 20 @7 a.m. CST/1300 UTCWednesday, Jan. 20 @ 10 a.m. CST/1600 UTCThursday, Jan. 21 @ 7 p.m. CST/0100 UTCGarmin G3X TouchTM Pilot andInstallation Introduction WebinarWednesday, July 7 @ 7 a.m. CDT/1200 UTCWednesday, July 7 @ 10 a.m. CDT/1500 UTCThursday, July 8 @ 7 p.m. CDT/0000 UTCGarmin GNStm Scenario-based Pilot TrainingWebinar Part IMonday, Feb. 15 @ 7 a.m. CST/1300 UTCMonday, Feb. 15 @ 10 a.m. CST/1600 UTCTuesday, Feb. 16 @ 7 p.m. CST/0100 UTCGarmin GNS Scenario-based Pilot Training Webinar – Part IITuesday, March 16 @ 7 a.m. CDT/1200 UTCTuesday, March 16 @ 10 a.m. CDT/1500 UTCWednesday, March 17 @ 7 p.m. CDT/0000 UTCGarmin GTN and G1000 Search andRescue SAR) Pilot Training WebinarWednesday, Sept. 8 @ 7 a.m. CDT/1200 UTCWednesday, Sept. 8 @ 10 a.m. CDT/1500 UTCThursday, Sept. 9 @ 7 p.m. CDT/0000 UTCGarmin Accident Mitigation Pilot TrainingWednesday, April 21 @ 7 p.m. CDT/0000 UTCThursday, April 22 @ 7 a.m. CDT/1200 UTCThursday, April 22 @ 10 a.m. CDT/1500 UTCGarmin Insider – Favorite Features andOperational Demonstrations WebinarWednesday, Oct. 27 @ 7 a.m. CDT/1200 UTCWednesday, Oct. 27 @ 10 a.m. CDT/1500 UTCThursday, Oct. 28 @ 7 p.m. CDT/0000 UTCGarmin Presents: Cirrus Perspective+Scenario-based Pilot Training WebinarWednesday, May 12 @ 7 p.m. CDT/0000 UTCThursday, May 13 @ 7 a.m. CDT/1200 UTCThursday, May 13 @ 10 a.m. CDT/1500 UTCGarmin G1000 NXi InflightPilot Training WebinarMonday, Nov. 15 @ 7 a.m. CST/1300 UTCMonday, Nov. 15 @ 10 a.m. CST/1600 UTCTuesday, Nov. 16 @ 7 p.m. CST/0100 UTCGarmin GTN Mini-scenarios – Pilot TrainingWednesday, June 16 @ 7 a.m. CDT/1200 UTCWednesday, June 16 @ 10 a.m. CDT/1500 UTCThursday, June 17 @ 7 p.m. CDT/0000 UTCGarmin G1000 NXi Cold Weather Pilot TrainingWebinarMonday, Dec. 13 @ 7 a.m. CST/1300 UTCMonday, Dec. 13 @ 10 a.m. CST/1600 UTCTuesday, Dec. 14 @ 7 p.m. CST/0100 UTC

TRAINING OPPORTUNITIES Instructor-led Training (ILT)

Garmin’s professional and experienced instructor team leads a series of scheduled and on-demand ILT classes. Our ILT training focuses on scenario-based training. Virtual training incorporates interaction through downloadable trainers while classroom training incorporates hands-on use of the equipment. Both options build on your knowledge from the self-study of the pilot’s guides, PC trainer and the eLearning courses. Participating in scenario-based training will develop your method of integrating Garmin avionics capabilities into your flight planning and flying. Designed for all levels of experience, our classes will provide you with the knowledge to confidently navigate through the national air space system. In the fall of 2021, we intend to resume classroom training at Garmin’s Headquarters in Olathe, Kansas, a suburb of the Kansas City metropolitan area. This assumes that COVID-19 protocols can be safely followed as customer and associate safety is our primary concern. If the pandemic continues into the fall, we will communicate options in advance to all registered attendees including the return to virtual training. When registering for a class in flyGarmin.com, please read the cancellation policy for your class on the Cancellation Policy tab.

GTNTM SERIES

OverviewThis training explores all of the capabilities that the GTN series of navigators offer. Intended to serve both novice and experienced aviators, this class provides scenario-based training with an emphasis on flight planning and instrument procedures. Whether you are new to the Garmin GTN or just looking for a refresher, every attendee will find value in the material covered.

Training topics:

System setup to assist with information management and improve efficiency
Communication, navigation and surveillance equipment operation
Creating and editing flight plans · En route navigation tools, including Direct-to, OBS and user-defined holds
Utility features such as VCALC/VNAV and trip and fuel planning
Loading and activating instrument approach procedures

Requirement:Completion of the GTN 2.0 Essentials eLearning course provided at no additional cost approximately 30 days prior to your class date.

a. This eLearning course is essential in preparing you for the class with your instructor. We will not fully cover several basic topics such as COM/NAV/SUR and user waypoints.
A fly.garmin.com account is required in order for us to grant you access (free to create).

Virtual Training ClassPrice: $495 with $100 discount for an in-person class within two years of the virtual training class completion.Schedule: 1-day virtual class from 8 a.m.5 p.m. CT.Dates: Thursday, Feb. 4, 2021/Friday, Feb. 5, 2021Additional Requirements for Virtual Training:

PC Trainer or iPad app Trainer downloaded and installed (Mac computers do not work).
- GTN iPad Trainer
- GTN Xi iPad Trainer
- PC Trainers (GTN, GTN Xi, TXi, G500/G600, GPS family of navigators)
A technology check approximately one week prior to your class. One of our instructors will reach out to make sure you can successfully log into the webinar platform and simultaneously run the PC trainer without excessive buffering.
Two computers or dual monitors are recommended (but not required). One for the PC trainer and one for the presentation.
Microphone and speakers.

Classroom TrainingPrice: $550 with $50 discount for returning customers after class completion.Schedule:

Day 1: 8 a.m.5 p.m. with lunch and beverages provided by Garmin
Day 2: 8 a.m.12 p.m. with beverages provided by Garmin

Dates: Oct. 4-5, 2021

GTNTM AND FLIGHT DISPLAY

OverviewThis training explores the capabilities within the GTN navigators and TXiTMseries, G3X TouchTM and G500/G600 displays. Intended to serve both novice and experienced aviators, this class provides scenario-based training placing an emphasis on flight planning and instrument procedures. Whether you are new to the Garmin GTN and retrofit displays, or just looking for a refresher, every attendee will find value in the material covered.Training topics:

System overview and integration
Primary flight display and multifunction display
System setup to assist with information management and improving efficiency
Communication, navigation and surveillance equipment operation
Creating and editing flight plans and vertical navigation
En route navigation tools, including Direct-to, OBS and user-defined holds
Utility features such as VCALC/VNAV and trip and fuel planning
Loading and activating instrument approach procedures

Requirement:Completion of the GTN 2.0 Essentials eLearning course provided at no additional cost approximately 30 days prior to your class date.

This eLearning course is essential in preparing you for the class with your instructor. We will not fully cover several basic topics such as COM/NAV/SUR and user waypoints.
A fly.garmin.com account is required in order for us to grant you access (free to create).

Virtual Training ClassPrice: $625 with $100 discount for an in-person class within two years of the virtual training class completion.Schedule: 1-day virtual class from 8 a.m.5 p.m. CT.Dates: Monday, Feb. 22, 2021/Tuesday, Feb. 23, 2021/Monday, April 12, 2021/Tuesday, April 13, 2021

Additional Requirements for Virtual Training:

PC Trainer or iPad app Trainer downloaded and installed (Mac computers do not work).
- GTN iPad Trainer
- GTN Xi iPad Trainer
- PC Trainers (GTN, GTN Xi, TXi, G500/G600, GPS family of navigators)
A technology check approximately one week prior to your class. One of our instructors will reach out to make sure you can successfully log into the webinar platform and simultaneously run the PC trainer without excessive buffering.
Two computers or dual monitors are recommended (but not required). One for the PC trainer and one for the presentation.
Microphone and speakers.

Classroom TrainingPrice: $700 with $50 discount for returning customers after class completion. Schedule:Day 1: 8 a.m.5 p.m. with lunch and beverages provided by Garmin Day 2: 8 a.m.4 p.m. with lunch and beverages provided by Garmin Dates: Aug. 28-29, 2021/Oct. 18-19, 20212021 PILOT TRAINING CATALOG | 10

G1000® /G1000® NXi

OverviewThis training explores all of the capabilities of the G1000 Integrated Flight Deck. Intended to serve both novice and experienced aviators, this class provides scenario-based training with an emphasis on flight planning, instrument procedures, vertical navigation and the automatic flight control system. This class covers all aspects of the G1000 and also highlights the increased capabilities of the G1000 NXi system.

Training topics:

Primary flight display and multifunction display
Communication, navigation and surveillance equipment operation
Flight planning
Enroute navigation tools, including Direct-to and user-defined holds
Automatic flight control system
Vertical navigation
Instrument procedures, including DPs, STARs and IAPs
Hazard avoidance, including traffic, terrain and weather
Abnormal operation (i.e., LRU failure and reversionary modes) Note: covered in classroom training only

Requirement:Completion of the G1000 NXi eLearning course provided at no additional cost approximately 30 days prior toyour class date.

This eLearning course is essential in preparing you for the class with your instructor. We will not fully cover several basic topics such as COM/NAV/SUR and user waypoints.
A fly.garmin.com account is required in order for us to grant you access (free to create).

Virtual Training ClassPrice: $700 with $100 discount for an in-person class within two year of virtual training class completion.Schedule: 1-day virtual class from 8 a.m.–5 p.m. CT.Dates: Thursday, March 4, 2021/Friday, March 5, 2021/Monday, April 26, 2021Tuesday, April 27, 2021/Monday, June 7, 2021/Tuesday, June 8, 2021

Additional Requirements for Virtual Training:

PC Trainer (Mac computers do not work) must be purchased and installed for one of the following. To avoid having to pay for expedited shipping, order at least two weeks prior to your webinar to allow time for processing, shipping and installation.
- a. Piper Archer
- b. Cessna Caravan
- c. Quest Kodiak
- d. Piper Seminole
- e. King Air
- f. Cessna NAV III
- g. Beechcraft Baron G58
- h. Piper M500
- i. Beechcraft Bonanza G36
- j. Piper M350
- k.Cirrus SR-2X
- l. Epic E1000
A technology check approximately one week prior to your class. One of our instructors will reach out to make sure you can successfully log into the webinar platform and simultaneously run the PC trainer without excessive buffering.
Two computers or dual monitors are recommended (but not required). One for the PC trainer and one for the presentation.
Microphone and speakers.

Classroom TrainingPrice: $700 with $50 discount for returning customers after class completion.Schedule:Day 1: 8 a.m.–5 p.m. with lunch and beverages provided by GarminDay 2: 8 a.m.–4 p.m. with lunch and beverages provided by GarminDates: Aug. 28-29, 2021/Oct. 18-19, 2021

EAA AirVenture: July 26–Aug. 1

The Garmin Aviation Training team again anticipates offering seminars and classes at EAA AirVenture, the world’s largest gathering of recreational pilots and aviation enthusiasts. From July 26-30, the team plans to provide 2-hour GTNTM training seminars, focusing on what is most important to our customers flight planning and instrument approach procedures. These classes are great introductory or recurrent training opportunities. After several years of success, we will continue offering the G3X TouchTM Academy in addition to the other GTN pilot training seminars in the Garmin tents. We look forward to adding new topics based on the exciting new product announcements in recent months and years.As EAA AirVenture 2021 nears, be sure to visit flyGarmin.com/training to see the full and evolving list of training events and to register for one of the classes.

REGISTRATION PROCESS

TRAINING ENROLLMENTSMake your reservation today for one of the training events by visiting flygarmin.com/trainingUnder the training tab, click on your desired training seminar in the 2021 Live Classes Calendar to begin the enrollment process. Classes fill quickly, so reserve your seat today!CUSTOM TRAINING REQUESTSAt Garmin we recognize that some training needs may require special attention. The Aviation Training team can support on-demand training requests for the GTNTM (Xi), G500(H)/G600, TXiTM and integrated flight decks such as the G1000® NXi, G1000HTM NXi, G3000®, G3000HTM, G5000® and G5000HTM. This is highly dependent upon instructor availability and training resource considerations and will be scheduled on a first-come, first-serve basis. A minimum of 5 attendees is recommended for a class of this kind to be conducted.Optional Two-hour Aviation Weather Radar WebinarSuccessful operation of weather radar requires an understanding of radar principles as well as operational considerations and techniques. This training starts with the fundamentals of groundbased and airborne weather radar systems and then covers operational techniques and best practices for using the Garmin GWXTM 70, GWXTM 75 and GWXTM 80. The session concludes with a scenario-based module on weather threat management to assist with risk mitigation. The webinar is suitable for pilots with little weather radar experience, pilots looking to hone and refresh their weather radar skills, and pilots transitioning from other radar systems.To request this type of training, please completethe Custom Training Request FormOur training staff will contact you within 5 business days.For additional information, please contact the Aviation Training team at:[email protected]2021 PILOT TRAINING CATALOG | 13

CONNECTING WITH YOUR GARMIN TEAM

Garmin understands that customers may have questions on how to maximize the capabilities of the equipment, or how to conduct specific actions. Garmin has experts available to answer these questions seven days a week. They may be contacted at (866) 739-5687 or email at [email protected]

FOLLOW US

Look for announcements for new training videos, webinars and seminars at major events located throughout the world on Garmin social media sites.Watch for new opportunities at flygarmin.com/training.