Geeetech Duplicator 5 DIY 3D Printer User Manual

Geeetech Duplicator 5 DIY 3D Printer

SUPPORT

Thanks for choosing Geeetech, we strive to provide a satisfied and pleasant shopping experience for you, but we do understand there may be some questions you may encounter in using our product. If so, you can contact us directly or post on our forum, our technique staff will help you resolve it. For more detailed information, you can also visit Geeetech wiki from our home page. (https://www.geeetech.com)For detail building instructions, please download at: https://goo.gl/XNF71YFor detailed building videos, please check at YouTube: https://goo.gl/wwtL6YSubscribe our YouTube channel for more videos. https://www.youtube.com/user/geeetechJoin our geeetech 3D printer user club. https://goo.gl/GhJbe3Feel free to drop a line at [email protected] .

Copyright Declaration

The copyright of this manual belongs to the Shenzhen GETECH CO., LTD. (hereinafter referred to as the “Geeetech”), and all rights reserved. No part of this specification should be reproduced or extracted in any forms or means by any company and individuals, without the prior written consent of Geeetech.

For More Geeetech Products

If you are interested in the technology of 3 D printing, flight control and U-home, welcome to Geeetech, we have series of made-up products, main boards, modules and a variety of peripherals for you. Or if you are looking for relevant information or technical support, please log in our Forum where you can find anything you want about open source. To know more about our new products, please visit www.geeetech.com , we will serve you wholeheartedly

SAFETY INSTRUCTIONS

Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided detailed instructions to help you assemble it easily, please download at geeetech.com.However, ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read the entire manual to enable you to make an informed decision.Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 24V supplied by a certified power supply, so you shouldn’t ever have to get involved with anything over 24V but bear in mind there can still be high currents involved and even at 24V they shouldn’t be taken lightly.High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end can run about 230°C, the heated bed runs 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.We wouldn’t recommend leaving your printer running unattended, or at least until you are confident to do so. We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.

INTRODUCTION

Duplicator 5 3D printer is designed and manufactured by Shenzhen Getech Co., Ltd. Its DIY design gives you unlimited joys when you are seeing a complete machine coming out of a pile of components.Hiding behind its gentility appearance is a slew of excellent features, making it outstanding among its competing products. High printing accuracy and speed, incredibly thin layer height, stable frame, customized 3D printing software—EasyPrint 3D, easy-to-manage LCD screen and open filament system. The most attractive one is its agile dual extruders, allowing you to print in multi-colors and unleashing your unique creativity.With an extra Wi-Fi module, you can upgrade Duplicator 5 to enjoy the convenience brought by our cloud 3D printing solution. After you configure your Duplicator 5 with Wi-Fi hotspot, the cloud 3D printing solution enables you to enjoy a plenty of free 3D models, direct control over the whole printing process and share your printing experience via App anywhere and anytime.

PACKAGE LIST

This list includes all the parts required to assemble your Duplicator5. After you received your package, please check if all the parts listed are included. Also make sure all the components are in good condition and not damaged during shipping. If anything is missing please contact with our customer service straight away, provide us the NO. , Name, and Qty.

NO. Name Specifications Qty. Pic.
1 Smooth Rod ψ 8*L308mm 2

 
2 Smooth Rod ψ 8*L423mmX axis 2
3 Smooth Rod ψ 8*L463mmY axis 2
4 Smooth Rod ψ 10*L300mm Z-axis

2
5 Washer M3 58
6 Locking ring D8 6
7 Locking ring D10 2
8 Wing nut M3 4
9 Hex nut M2.5 2
10 Square nut M3 47
11 Hex nut M3 46
12 Z-axis nut Φ8（tin-bronze）（screwed on Z axis motor NO.52） 1
13 Screw M2.5*12mm 2
14 Screw M3*6mm 4
15 Screw M3*8mm 4
16 Screw M3*12mm 8
17 Screw M3*16mm 67
18 Screw M3*20mm 20
19 Screw M3*25mm 2
20 Screw M4*10mm 6
21 Screw M3*8mm Countersunk screw 4
22 Screw M3*30mm Countersunk screw 4
23 Belt Spring Length 10mm 2
24 Hotbed Spring Length 12mm 4
25 Linear bearing LMK10LUU 2
26 Linear bearing LM8SUU 8
27 Linear bearing MR84ZZ 2
28 Ball bearing F688ZZ 4
29 Ball bearing F685ZZ 1
30 Driven wheel shaft D5-L26mm 1
31 Pulley diameter=5mm 3
32 Pulley diameter=8mm 5
33 Belt 2.3m 2GT 1
34 Belt loop 2GT 1
35 Spacer D7-D3-H3 4
36 Spacer D7-D3-H12 2
37 Spacer With Aircraft type end 4
38 Motor gasket 42*42*2mm 1
39 Timing belt plate Aluminum 45*5.5*1.0

1
40 Endstop For X/Y/Z axis 3
41 Control board GT2560 VB+5 A4988 1
42 Heat sink 9*10*5mm 5
43 3M8810 sticker 25*25mm 2
44 Power supply Unit 24V,15A 1
45 LCD 2004 LCD2004 1
46 knob For LCD 1

47

 Building platform ≈228*149*3mm 1
48 Tape ≈228*149mm 1
49 Hotbed ≈ 228*149*1.6mm 2
50 Steppermotor X axis 1
51 Stepper motor Y axis 1
52 StepperMotor Z axis 1
53 Fan 4010A-DC24V 1

 
54 MK8 Dual extruder Specially designed for Duplicator 5 1
55 Extensionboard EXTRUDER CON V1.0 2
56 Hex copperspacer 12mm (L) 4
57 Extensionboard cover Metal plate 2
58 Extruder wire 3.0mm, 2*6pin 2
59 USB cable 1.5M, A-B 1
60 Motor wire3-1 X/Y/Z-1000/350/200 1
61 Extruder motor wire 6-4pin, 80mm (L) 1
62 Extruder motor wire 6-4pin, 130mm 1
63 PowerCable With plug 1
64 Hotbed wire 600mm (L) 1
65 Endstop wire X/Y/Z-1000/350/200 1

 

Plastic parts
P1 Driving wheel carriage plastic mould 1
P2 Driven wheel carriage plastic mould 1
P3 Extruder carriage plastic mould 1

Wooden parts
D1 Front panel D5-01 1
D2 Right side panel D5-02 1
D3 Rear panel D5-03 1
D4 Left side panel D5-04 1
D5 Upper panel D5-05 1
D6 Lower panel D5-06 1
D7 Z axis bearing fixed panel D5-07 1
D8 Z axis rod fixed panel D5-08 2
D9 Z axis rod holder D5-09 2
D10 Y axis rod fixed panel D5-10 2
D11 Holder for control board fender D5-11 1
D12 Control board fender D5-12 1
D13 Building plate holder D5-13 2
D14 Filament holder set Black 1

Free add-ons
F1 Ejector pin L110mm, stainless 1
F2 File 1
F3 Screw driver 1
F4 Cable clips Plastic 8
F5 Starter filament 3 meters Random color 1
F7 Zip ties 15

GENERAL CARE AND MAINTENANCE

As with all the electronic equipment, it is important to keep your printer clean to extend its life. Regularly remove dust and debris with a microfiber cloth or compressed air. Dredge the tube and the nozzle after use every time to ensure fluent performance.

  • Don’t leave the heaters on the printer turned on for a long periods of time when not used.
  • Don’t leave your printer in shady and moist places, which may exacerbate the problems associated with erosion.
  • The three axes of the GEEETECH Duplicator 5are lubricated with grease for smooth operation and can last for a long time. Grease may need to be re-applied to your printer to maintain smooth performance.
  • Avoid positioning your power supply unit in such a way that the brick is hanging, pulling, or putting any unnecessary stress in the electrical wires and components.

 

www.geeetech.com

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,