G02
Scan QR code to extend 18 months warranty24 hrs customer service
OVERVIEW
(For first time pairing)
Take out both two earphones, then re-insert them into the case to activate the earphones.Notes: If earphones fail to be charged, pls charge the case via Type c cable (for details, pls follow the below steps).
How to Pair
Put both earphones into charging case to activate them, then take them out, both earphones will auto power on and pair with each other. After one side white LED blinks quickly, the other side white LED flashes slowly. Then search G02 on a mobile phone and connect it.
(Notes: If fail to connect, pls try the following steps by hand.)
- Take one of the earbuds out of the charging case.
- When white LED blinks quickly, press sensor area 4 times, white LED turn off, put the earbud back into the charging case.
- Take out the other earbud and do the same operation.
Take both earbuds out of the charging case at the same time, when one side white LED blinks quickly, the other side white LED flashes slowly （flashes every 10s ）, then both sides are connected successfully. Search G02 on a mobile phone and connect it.
FUNCTIONS
Power-onTake earphones out from the charging case and they will auto power onPower-offPut earphones back into the charging case, it will auto power off(Notes: Long press sensor area 5s to power off the earbuds without charging case.)
Play/PausePut earphones back into the charging case, it will auto power off(Notes: Long press sensor area 5s to power off the earbuds without charging case.)
Skip Track Forward/BackwardDuring playing, keep pressing the right earphone for 2s to the next song. keep pressing the left earphones for 2s to the last song.
Voice Assistantwhen standby, touch left/right earphones three times to activate voice assistant (like Siri)
Reject callPress the MF button on the left or right earphone for 2 seconds to reject the incoming call. Or use your mobile phone to reject the incoming call.
Answer Call /Hang up callTouch the left or right earphone twice to answer the incoming call and touch twice again to end it.
Charge the earphonesInsert the earphones into the charging case, LED will be solid white when charging, after fully charged, the white LED will turn off.
Charge the casePlease charge the case via Type C cable. White LED flashes when charging, turn to solid white when fully charged, When the low battery, last white LED flashes
PRODUCT PARAMETER
Model: G02Operation Range: 10m (with no obstacle)Bluetooth version: V5.1Charging time: approx 2hrMusic time: approx 6 hrBattery Type: Li-ionBluetooth profiles: HFP/HSP/A2DP/AVRCPBattery capacity (earphones): 3.7V 30mAHBattery capacity (charging case); 3.7V 300mAH(All technical data should be subject to practical performance.)Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.
TIPS
- Before using the earphones, please read the manual carefully and keep it for future reference.
- The earphones need to be fully charged prior to first-time use.
- If the earphones are left unused for over two weeks, please recharge them periodically.
- Please use the chargers made by a qualified manufacturer.
- If the earphones cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the earphones will exit pairing mode, please re-enter the mode, if a procedure error of your phone occurs, reboot it; if a procedure error of the earphones occurs, reboot or reset it.
WARNING
- Never disassemble or modify your earphones for any reason to avoid any damages and danger.
- Do not store the earphones in extreme temperatures (under 0 to 45 )
- Avoid using the indicator close to the eyes of children or animals.
- Do not use these earphones during a thunderstorm to avoid irregular function and increased risk of electric shock
- Do not use harsh chemicals or strong detergents to clean the earphones
- Keep the earphones dry.
24 hours support:[email protected]
[xyz-ips snippet=”download-snippet”]