GEPRC GEP-35A-F7 Flight Controller User Manual
SPECS:
- Model Name：GEP-35A-F7
- MCU: STM32F722
- IMU: MPU6000 gyro/accelerometer(SPI)
- Firmware target： GEPRCF722
- OSD: Betaflight OSD w/ AT7456Ev
- Current： YES
- OSD： YES
- Beeper： YES
- LED： YES
- USB： micro USB
- BEC output：
- Intergrated LC FilterESC MCU： BB21F16GContinuous current： 35AMAX current： 45A (10s)Input： 2~6SSupports： Dshot600,Oneshot,MultishotCurrent meter： 210Traget： G_H_30Size： 32x32mm BoardInstalling Hole： 26.5×26.5mm,M2Weight： 8.3g
Instruction Diagram
DJI Digital FPV System
Note: not all combinations are valid. When the flight controller firmware detects this the serial port configuration will be reset.
Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.
Receiver
Note: not all combinations are valid. When the flight controller firmware detects this the serial port configuration will be reset.
Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.
F. Port
CLI：
set serialrx_halfduplex = ONset serialrx_inverted = ON save
FlySky FSA8S V2
VTX
TBS UNIFY PRO 5GB
Camera
LED and Buzzer
GPS
Official website
Manual
[xyz-ips snippet=”download-snippet”]