GlassOuse PILLOW SWITCH User Manual
WARNINGS
- While removing your Pillow Switch from your GlassOuse or other devices, pay attention not to damage the wire joining points on the 3.5mm jackconnector and do not pull the cable harshly.
PILLOW SWITCH
A durable switch option covered with soft cushion for users with less physical control. GS07 Pillow Switch provides 8.63cm activation surface, making the item comfortable enough for both user groups needing either a large or smaller target area to interact. Operated by 150g activation force, GS07 Pillow Switch has an auditory click and tactile feedback
Pillow Switch comes with a 185cm long cable and a 3.5mm mono jack plug-in. Can be used with touch fastener straps and its attached safety pin to mounton fabric surfaces and wheelchair pads.
SWITCH CONNECTION
1. Plug Gs07 Pillow Switch to GlassOuse V1.2, V2.0 or any 3.5mm jack adapted device via mono 3.5mm jack connector.2.1 Secure GS07 Pillow Switch on cushions or pillows via touch fastener straps.OR2.2 Use the attached safety pin to mount on fabric surfaces and wheelchair pads.
GS07 – PILLOW SWITCH
Dimensions: Diameter: 96.9mm x Thickness: 31.55mmWeight: 73±2gCable Length: 185±5cmActivation Surface: 88.00mmActivation Force: 150g
DEVICE
7th Floor, Huarong Building, Qiaolian East, Bulong Road, Longgang District, 518129, Shenzhen, Guangdong, ChinaP. 0086-755-8920-5835 F. 0086-755-8980-5835-812 | www.glassouse.com | www.ennopro.com
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]