Godox ML60 LED Light Instruction Manual

ML60 LED LightInstruction Manual

Foreword

Thank you for purchasing this Godox Product! This LED Light ML60 is a continuous light with wireless adjustment and 8 FX situational special effects. Suitable for almost all shooting occasions e.g. live, camping, make up, portrait shooting, make up, video, wedding, children photographyetc. It’s portable and easy to be operated.

Features:

● Freely switch LED continuous light mode and 8 FX situational special effects modes● 0% to 100% Precisely adjust light brightness● 16 Groups and 32 channels wireless remote control● Switch silent mode to light without interference● Compact and lightweight, easy to be held in hand

Warning Always keep this product dry. Do not use in rain or in damp conditions. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Keep out of reach of children. As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment. Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.

Parts

01. Body 07. Display
02. Power Switch 08. Thermovent
03. DC Power Socket 09. Fixing Socket for Handle
04. Control Panel 10. Accessory Locking Ring
05. SET Select Dial 11. LED Light
06. DIM Select Dial 12. Radiator

● Handle

13. Handle Bracket14. Direction Adjusting Ring15. Fixing Screw for Light Head16. Fixing Screw for Light Stand17. Fixing Buckle for Battery Case● Battery Case

18. Clip19. Fixing Hole for Battery Case20. Locking Ring for Battery Case21. NP-F970 Battery Compartment 1 and 222. Battery Level Display Button/Battery Locking Ring23. Battery Level Indicator24. Battery Case Leg25. Battery Power Output Port

What’s in the Box

Power Management

  1. Power SupplyAdapter power supply: input: 100-240V~50/60Hz 2A, output: 16.8V 4.2A.External battery power supply: install two NP-F970 batteries into the battery compartment. Then, use the power cable to connect the battery case with the light body to achieve a power supply.The battery case can only offer battery discharging instead of charging. When powered by a battery box, two batteries shall be used simultaneously. Please do not use one battery individually.

Operation

  1. Power OnPress the power switch to control the on/off of the light, and the OLED display will show the current information.
  2. Mode Selection: Continuous Lighting Mode/FX Special Effects ModePress SET button to enter the menu. The, turn the SET select dial to FX and screw the DIM select dial to switch the two modes:Continuous lighting mode: set FX mode to OFF to enter continuous lighting mode.Special effects mode: there are 8 situational special effects from FX1 to FX8.
  3. 2.4G Wireless SettingTurn on/off 2.4G wireless: press SET button to enter the menu. Turn the SET select dial until the wireless icon is displayed. Then, turn the DIM select dial toturn on or off 2.4G wireless.Channel CH setting: press SET button to enter the menu. Turn the SET select dial until the CH is displayed. Then, turn the DIM select dial to choose channelfrom 1 to 32.Group GR setting: press SET button to enter the menu. Turn the SET select dial until the GR is displayed. Then, turn the DIM select dial to choose group from A toE and 0 to 9.ID setting: press SET button to enter the menu. Turn the SET select dial until the ID is displayed. Then, turn the DIM select dial to choose 99 IDs from 1 to 99.
  4. Brightness adjustment: turn the DIM select dial to adjust brightness.
  5. Silent mode:when is displayed, the silent mode is turned on.Turn on the silent mode: press SET button to enter the menu. Then, screw the DIM select dial to turn on or off the silent mode. Set it to on to enter non-silentmode while set it to off to enter silent mode.
  6. Install and detach battery case6.1 Install battery case: Aim the handle’s fixing buckles into the battery case’s fixing holes, pull the batter case downwards until being tightened.6.2 Detach battery case: push the battery case’ locking ring and push the battery case upwards to take it out.6.3 Connect the battery case with light head: insert the one end with clamping buckle of the power cable into the battery case while another end into the DC power socket of the light head.6.4 Insert two FP970 batteries, and the LED light can be put into usage.

Technical Data

LED Light ML60
Adapter Output: 16.8V 4.2A
Power Max. 60W
Channel 32
Group 16(A B C D E F,0-9)
Brightness Adjusting Range 0%~100%
100% Illuminance(LUX)(≈) 73000 (testing distance is 0.5m)
CRI(≈) 96
TLCI(≈) 97
Color Temperature 5600 ± 200K
Working Temperature -10~40℃
Weight 0.77Kg (not include handle and reflector)
Dimension 145*88*88mm (not include handle and reflector)

* Product design and specifications are subject to change without notice.

Maintenance

This product, except consumables e.g. charger and charger cable, is supported with a one-year warranty. Avoid sudden impacts and the product should be dedusted regularly. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals.Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

 

GODOX Photo Equipment Co., Ltd.Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: [email protected]godox.comMade in China

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,