Gogen Wireless Stereo Headphone TWS Pro User Manual

Gogen Wireless Stereo Headphone TWS Pro User Manual

SECURITY PRECAUTIONS

In order to have a proper and safe use of the headset, please read this user manual in detail and save it. Be aware of the following guidelines when using your headset:

WARNING

  • You should adjust the volume carefully when using the headset to prevent hearing damage.
  • Please stop using the headset in potentially hazardous situations to ensure your safety.
  • Please avoid using the headset to listen to music, make or receive calls which may cause a distraction while driving.
  • Put this product and its accessories somewhere out of the reach of children, to avoid a fatal danger caused by inappropriate use.
  • You should keep water from entering the headset, which may cause damage to the sound quality or the headset.
  • You should avoid turning the volume so high that you can’t hear anything around you. If you feel a tinnitus or the volume is too high, please reduce the volume.
  • Stop using the headset if you feel obvious discomfort, irritation or have other adverse reactions.
  • The headset should not be stored or used at temperatures below -10 °C or above 55 °C which may shorten headset or battery life.

TECHNICAL SPECIFICATIONS

Bluetooth Version: V 5.0Bluetooth Profile: HSP, HFP, A2DP, AVRCP, AAC, TWSOperating range: 10 mFrequency Response: 100 Hz – 10 KHzRated Power: 3 mWSensitivity: 90 dB (±3 dB) @ 1 KHzImpedance: 16 Ω ± 15%EIRP: 4 dBmBattery: Li-Polymer 400 mAh Charging Case + 45 mAh X 2 earbudsMusic playing time: up to 4 hours + 12 hours with charging case N.W.: 4,5 g / earbud, 46 g including charging case

ACCESSORIES

Eartips, USB Charge Cable, Charging Case

DEVICE LAYOUT

  1. LED light
  2. Touch control area
  3. Charging case battery indicator

POWER ON & PAIRING

Option 1: AUTO ON & PAIRINGWith the two headsets in case and lid open to active Power ON. Take out the headsets and wait about 5 seconds until LEFT & RIGHT earbuds AUTO paired. The LED lights on R earbuds will flash white and orange alternately.Option 2: Manually ON & PAIRINGPick up the headset from the charging case, long tap the L&R earbuds for 2 seconds until they powered OFF. After a while (5 seconds), long tap the L&R earbuds for 3-5 seconds. After connecting, the LED lights on R earbuds will flash white and orange alternately.

BLUETOOTH CONNECTION STEPS

  1. Please keep your headset and mobile phone as close as you can, within 1 meter.
  2. Turn on “Bluetooth” in setting on your phone or other devices, and then find and select GOGTWSBRO.
  3. Click on GOGTWSBRO and Bluetooth Headset gets connected with your phone or devices automatically. (Some may require pass code which is “0000” (4 zeros)).

TAP CONTROL INSTRUCTIONS

FUNCTION: CURRENT STATUS: ACTIONACTIVATOR OFF: CONNECTING TO PHONE: Press 3 times L or R earphone to activte SiriANSWER CALL: INCOMING CALL: Short press the L or R earphoneEND CALL: ON CALL: Short press the L or R earphoneREJECT CALL: INCOMING CALL: Press L or R earphone for 2 secondsPLAY & PAUSE MUSIC: MUSIC PLAYING: Press R earphone for 2 secondsNEXT TRACK: MUSIC PLAYING: Press L earphone for 2 seconds

CHARGING

CHARGING WAYS OF HEADSETPut the headset(L)(R)to the corresponding position in the bottom of the charging base, close the charging base tightly. The indicator light of the headset is orange when being charged, and will turn off automatically after being fully charged.CHARGING WAYS OF CHARGING BASEUse the USB charging cable to charge. The indicator light of the charging base is flashing white when being charged and lightswhite after being fully charged.

WARNING:

  • You must select a qualified charger from a regular manufacturer. (Charging Voltage: 5V Charging Current: 900mA for charging case)
  • A fully charged headset will lose its power automatically if left unused. It is recommended to charge the headset each three months.
  • Do not leave the headset in a too hot or too cold condition (best between -10°C and +40°C) which may affect the headset‘s operations although it is fully.
  • Please wear this Headset properly for best tone quality.Do not disassemble hardware. Please use soft and dry cottons for cleaning.
  • Make sure the headset is fully charged before first use.
  • This Headset is not waterproof. Do not use it while swimming or diving.
  • If do not use this Headset for long time, please charge once a week to extend battery life.
  • Keep your Headset and device as close as you can to avoid interference of signal path.

WARRANTY

Our product is warranted for 2 full year from the date of purchase. The warranty is provided on all material defects and workmanship. Guarantee of 24 months does not apply to decrease in the accumulator’s effective capacity caused by its use or age. Effective capacity gradually decreases depending on the method of use of the accumulator.

WE RESERVE THE RIGHT TO CHANGE TECHNICAL SPECIFICATIONS.

TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS.THIS BAG IS NOT A TOY.

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

 

 

Gogen Wireless Stereo Headphone TWS Pro User Manual – Gogen Wireless Stereo Headphone TWS Pro User Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by