Goodmans 364137 3-in-1 QI Wireless Charger, LED Light and Phone Stand User Manual

Goodmans 364137 3-in-1 QI Wireless Charger, LED Light and Phone Stand

WelcomeThank you for choosing this Goodmans product. We’ve been making electrical products for the British people for over 90 years. Each of our products have been carefully designed to be great at what they do and this one is no exception. We hope you enjoy your new 3 in 1 Qi Wireless Charger, LED Light and Phone Stand. Your 3 in 1 Qi Wireless Charger, LED Light and Phone Stand.

In The Box

Carefully remove your wireless charger with Mood Light from the box. Inside the box you will find:

  • 1 x Qi Wireless Charger with Mood Light
  • 1 x Type-C USB Cable
  • Quick Start Guide
  • Instruction Manual
  • Guarantee & Safety Manual
Side view
  1. QI Wireless ChargerUsed to charge your QI enabled device.
  2. Type-c Input PortUsed to power the Qi wireless charging with mood light.
  3. Touch SwitchTouch the button twice fast to switch On / Off of mood light. Touch the button once to select brightness level.
  4. Mood Light
  5. Power Indicator Light
  6. Wireless Charging Indicator Light
  7. Type-C Connector
  8. Type-C Cable
  9. USB Connector

Quick Setup

Connect Your QI Wireless Charging with Mood Light

  1. Connect the cable provided to the Type-C port on the wireless charger.
  2. Connect the other end of the USB cable to a power adapter (Not included). Please note fast charging requires a 9V plug adaptor.
  3. When connected successfully, the white LED indicator light will turn on.

Charging Your QI enabled devices

  1. Place your QI enabled device on the wireless charger.
  2. The charging indicator light will illuminate blue when your device is charging and change to white when your device is fully charged.

Fast Charging

Compatible Chargers

  1. This device supports fast charging when the output of the USB power source is 9V.
  2. Make sure that your device is located in the center of the wireless charger.Note: an adapter is not supplied with the wireless charger.
Charging Do’s and Don’ts
  1. For standard speed wireless charging, you can use an adapter with a 5V 2A output or a standard USB port on your PC.
  2. If your device supports fast charging we recommend that you use an adapter that has Qualcomm Quick Charge technology.
  3. Do not use in a hot, humid or corrosive environment.
  4. Do not place the wireless charger too close to magnetic stripes or chip cards.
  5. Please keep the wireless charger at 20cm away from any implantable medical devices(pacemakers, implantable cochlear, etc.)
  6. Keep away from children.
  7. Do not use a metal case for your smartphone when using the wireless charger.
  8. For optimum charging times make sure that your device is not in a protective case that is more than 2mm thick, and that it is positioned centrally over the wireless charger.
  9. Remove your smartphone from the wireless charger when fully charged, and remove the power from the charging base.

Troubleshooting

Problem What to do
QI wireless charger is not working. Check the USB cable is connected correctly to the wireless charger.

 

Make sure the power adapter and USB cable is connected.
The mood light isn’t working. Please check the USB cable is connected and follow the instructions in section 2.2.
QI enabled device isn’t charging. Place your device on the centre of the Qi wireless charger.

 

If the phone is in a protective case, remove it and try again.

 

Make sure your mobile phone is Qi enabled devices.

Please Note: Not all device charging support is listed above. Please refer to your device’s user manual for further information.

Technical Specifications
Model Number 364137
Input DC 5.0V 2.0A

DC 9.0V 1.67A(fast charger)
Output DC 5.0V 1.0A

DC 9.0V 1.2A(fast charger)
Dimensions 191mm(L) x 203mm(W) x 13mm(H)
Weight 380 g

EC DeclarationThis product is intended for use within the UK This appliance complies with the below listed EU directives.2014/53/EU Radio Equipment Directive 2011/65/EU Restriction of Hazardous Substances The complete declaration of conformity is available upon request for relevant Enquiries. The “Qi” symbol is a trademark of the Wireless Power Consortium.

Information on Waste Disposal for Consumers of Electrical & Electronic Equipment

This mark on a product and/or accompanying documents indicates that when it is to be disposed of, it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked waste products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.For proper treatment, recovery and recycling; please take all WEEE marked waste to your Local Authority Civic waste site, where it will be accepted free of charge.If all consumers dispose of Waste Electrical & Electronic Equipment correctly, they will be helping to save valuable resources and preventing any potential negative effects upon human health and the environment of any hazardous materials that the waste may contain.

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,