InfraredThermometerUser’s Manual
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with all Federal regulations. Customer Service: 1-888-999-4215
Operation
INSTALL BATTERIES
Open the battery cover, install 2 AA batteries, and close the cover. A partially filled battery symbol will show on the LCD. (Though the battery may be full, the battery icon will show a partially filled battery icon, this is normal.) After installing the new battery, you may need to wait 10 minutes for the thermometer to warm up. If the thermometer has not been used for a few hours, the next time it is powered on, the thermometer will take some time to read the ambient temperature.
CONTROLS
- Power ON: Press the Temperature Trigger and the thermometer will power ON. Wait approximately 3 seconds and press the trigger again to measure temperatures. Must be within 2”- 6” of the subject for the thermometer to register a measurement.
- SET: Press to turn volume ON/OFF. (The volume icon will appear on the LCD when the volume is ON and will disappear when the volume is OFF.) Press and hold to access the previous temperature readings list. (The thermometer can store the 16 most recent temperatures taken.)
- M: Press to change temperature reading units between Celsius and Fahrenheit.
- +/- : Press and hold the + button to change the temperature reading mode to Household items mode (indicated by a house icon on LCD) or Human temperature mode (indicated by a human head icon on LCD). When in the previous temperature reading list (Press and hold SET button to access previous temperature reading list), press to scroll up and down the list of saved temperatures. Press and hold + or – to clear the previous temperature reading list.
MEASURING TEMPERATURES
Aim the thermometer at the subject you wish to measure the temperature of and Stay within 2”- 6″ of the subject’s surface. Press the Temperature Trigger on the front of the thermometer, and the temperature will be displayed on the LCD.
REPLACING BATTERIESWhen the battery is low, the LCD will flash red and beep when trying to operate the thermometer.
Please replace it with new batteries to keep the thermometer operating normally. Once new batteries are installed, a partially filled battery symbol will show on the LCD. This is the software design. The battery indicator will always display what appears to be a partially filled battery.
Important Safety Instructions.
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- WARNING: Shock hazard – Do Not Open.
- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
This thermometer is a non-contact infrared thermometer, with an easy-to-use design and swift, accurate temperature reading capability. With the ability to read temperatures in just one second, you don’t have to wait around to know your reading. The noninvasive infrared technology allows this thermometer to read surface temperatures safely from a distance.
Product Warranty
Limited 1 Year Warranty
The Manufacturer (DPI, Inc.) warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year for parts and 90 days for labor from the original date of purchase. The Manufacturer agrees, at its option during the warranty period, to repair any defect in parts, material, or workmanship, or to furnish a repaired or refurbished product of equal value in exchange without charge (except for a fee for shipping, handling, packing, return postage, and insurance which will be incurred by the customer). Such repair or replacement is subject to verification of the defect or malfunction and proof of purchase as confirmed by showing the model number on the original dated sales receipt. This warranty is not transferable to any person or entity other than the original purchaser and does not cover the costs incurred from installation, removal, or reinstallation of the product.
The extent of the Manufacturer’s liability under this warranty is limited to the repair or replacement provided above. In no event shall the Manufacturer’s liability exceed the purchase price paid by the purchaser for the product.
Services provided under the terms of this warranty are your exclusive remedy.
Coverage Does NOT Include:
- Any product which has been subject to damage due to an act of God, misuse, neglect, accident, abuse, commercial use.
- Damage due to improper installation, operation or maintenance, or attempted repair by anyone other than the Manufacturer.
- Damage to external media devices such as DVDs, CDs, iPods, iPhone, MP3 players, and/or memory devices.
- Cosmetic damage, accidental damage, set-up adjustments, panel damage by non-moving images for a long period of time, connection to an improper voltage supply, modification of, or to, any part of the product.
- Re-manufactured units product sold “As Is”, or closeout product. This warranty Is valid only In the United States and Canada and grants specific legal rights. You may also have other
- The cost of shipping this product to the Service Center and its return to the owner.
Where is the Warranty Valid?rights which vary from state to state.How to Obtain Service
DO NOT RETURN THIS UNIT TO THE RETAIL STORE FOR WARRANTY SERVICE.FOR WARRANTY SERVICE AND INSTRUCTIONS ON HOW TO RETURN YOUR PRODUCT CALL:1-888-999-4215
report this adPlease make sure to place the product in its original packaging, or packaging that provides the same amount of protection as the original packaging.
Copyright © 2015. Digital Product International(DPI inc)
[xyz-ips snippet=”download-snippet”]