guardian Smart Air Purifier CDAP4500 User Guide

USE & CARE INSTRUCTIONS

Wifi & Bluetooth® enabledSmart Air PurifierModel No. CDAP45003-Year Limited WarrantyCustomer Service1.866.603.5900www.guardiantechnologies.comDate Purchased month __year __Note: Use GENUINE GuardianTechnologies replacement parts only.REV0920

READ AND SAVE THESE INSTRUCTIONSWARNINGSFailure to comply with the warnings listed below may result in electric shock or serious injury.This product should be used only in accordance with the specifications outlined in this manual. Usage other than what has been specified here may result in serious injury.When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  • Read all instructions before using the appliance.
  • Caution is necessary when any appliance is used by or near children or people with disabilities and whenever the appliance is left operating unattended.
  • IMPORTANT – This appliance has a polarized plug (one blade is wider than the other).To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
  • To avoid fire or shock hazards, plug the appliance directly into a 120V AC electrical outlet.
  • Keep the cord out of heavy traffic areas. To avoid fire hazards, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.
  • To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
  • Extreme caution is necessary when any appliance is used by or near children or people with disabilities and whenever the appliance is left operating unattended.
  • Always unplug the air purifier before moving it, opening the grill, changing filters, cleaning, or whenever the air purifier is not in use. Be sure to pull by the plug and not the cord.
  • NEVER drop or insert any object into any openings.
  • DO NOT run cord under carpeting.
  • DO NOT cover the cord with throw rugs, runners, or similar coverings.
  • DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  • DO NOT operate any appliance with a damaged cord or plug, if the motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Call Customer Service at 1.866.603.5900 for assistance.
  • Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
  • DO NOT use outdoors. · DO NOT place anything on top of the unit.
  • NEVER block the air openings, grills/outlets, or place on a soft surface such as a bed or sofa, as this could cause the unit to tip over, blocking the air intake or outtake opening.
  • DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user-serviceable parts. All servicing should be performed by qualified personnel only.
  • WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
  • WARNING: Skin or eye damage may result from directly viewing the light produced by the lamp in this apparatus. Always disconnect power before replacing lamp or servicing. Replace Lamp With Model No. LB4000, Manufactured by Guardian Technologies.
  • Always unplug the unit before cleaning or servicing in any way.
  • CAUTION: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product. NEVER use alcohol or other solvents.
  • The device only supports 2.4GHz connections.

The 8 hour TWA Ozone for this product is 0.001 ppmv when tested in a 30 m3 chamber. The product complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (ppmv) in a 24-hour period. The Health Canada Guideline 2010 recommends that the maximum exposure limit, based on averaging time of 8 hours, is 0.020 ppmv or less when tested in a sealed, controlled room approximately 30 m3.WARNING: Cancer or Reproductive Harm.For more information go to www.P65Warnings.ca.gov.LAMP CONTAINS MERCURYManage in accordance with Spills, Disposal, and Site Cleanup Requirements. In case of breakage, follow clean-up procedures provided by the contacts below. www.epa.gov/cflcleanup 1-866-284-4010This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during operation.This product earned the ENERGY STAR label by meeting strict energy efficiency guidelines set by the U.S. EPA. Room air cleaners have demonstrated the potential for improving air quality and providing health benefits. EPA does not endorse manufacturer claims regarding the degree to which a specific product will produce healthier indoor air. The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model’s CADR for Smoke and the electrical energy it consumes, or CADR/Watt.

PRODUCT SPECIFICATIONS AND PARTS

CONTROLS

REPLACEMENT PARTS

Check out ourAUTOSHIP & SaveFilter Replacement Program™www.guardiantechnologies.com

IMPORTANT: Use Guardian Technologies GENUINE Replacement Parts only.To Purchase Contact Customer Service

WiFiSmart Air Purifier

Improve your indoor air quality with your new GermGuaradian WiFi and Bluetooth Smart Enabled Air Cleaning System. Multiple levels of cleaning provide allergy relief, fight germs and reduce unpleasant odors.The Smart Air Quality Monitor (QAM) detects the number of particles in the air and will automatically adjust the speed of the purifier to optimize room air quality when set in auto mode.Easily download the GuardianTechnologies app and you can control the system wirelessly with a smartphone.This product is enabled with Bluetooth Smart (Low Energy) technology which enables a wireless connection over short distances using a low level of energy. When your smartphone is out of Bluetooth range, it will automatically switch to a WiFi connection that you select during your setup process.

AIR CLEANING LAYERS

BEFORE OPERATING THE AIR PURIFIER

  1. Select a firm, level, and flat location for the air purifier.• For proper airflow, locate the unit at least 1 foot from any wall or furniture.• Make sure none of the grills are blocked.
  2. Plug the power cord into a 120V AC outlet.

IMPORTANT: When moving the air purifier, always lift the unit by the carrying handle located on back.Wifi & Bluetooth® CONNECTIONWe support iOS8 and above and most Android 5 and above

  1.  Plug the power cord into a 120V AC outlet.
  2. Make sure your smartphone is connected to WiFi.
  3. Download the Guardian Technologies™ free app to your smartphone from the AppleApp Store or Google Play. Both location services and Bluetooth need to be on to be able to connect the device to the Guardian Technologies App.
  4.  Once installed, hold the LINK button until the wireless connection light blinks green.Tip – Make sure the smartphone is within arm’s length of the purifier during setup.
  5. Complete WiFi connection as indicated on app setup instructions.Tip – when in use, the device will automatically select between Bluetooth® and WiFi.For more detailed app instructions, visit www.guardiantechnologies.comOptional voice-activated control is available using the Amazon Echo™ products and the Guardian Technologies (Gi Gi) skill located in the Alexa™ app. Note: You must own an Echo product and have the Alexa app downloaded to your smartphone for the voice control capability. Follow the instructions in the Guardian Technologies app to set up the voice control function and link it with the Amazon Alexa app. Before using, ensure your Guardian Wifi smart air purifier is connected to Wifi and your Guardian Technologies account.

OPERATING INSTRUCTIONS

Now you can control your air purifier both wirelessly and manually

  1. Turn unit power ON.
  2. Select fan speed MODE 1 – 51 = low, ultra-quiet sleep mode5 = high speed allergen controlAUTO MODE – The last fan speed is AUTO. When AUTO is selected the air purifier will change the fan speeds depending on the air quality level.
  3. Select UV-C ON or OFF using UV-C Mode Button.
  4. TIMER: If you prefer to run the purifier for a specific number of hours, you can select between 1 and 8 hours on the display.
  5. LINK – Links Air Purifier to app set-up.If a green light appears Wifi can connect to Smartphone.If a red light appears Wifi cannot connect to Smartphone.

Smart Air Quality Monitor (AQM): detects the amount of particulate matter (PM) in the air. The circular light on the front panel of thepurifier is the AQM Indicator and it will change colors, indicating the air quality level in the room. The particulate matter value will be displayed on the control panel. See values and status ranges in the chart below.Auto Mode: when “Auto” mode is selected the SmartAQM will automatically adjust the speed level of the purifier to optimize the room air quality.Your app will also display the color of the circle and provide the PM value.Below are the colors/values that can be displayed:

Ring Color

 Particulate Matter Value (Range)

Air Quality Status
Green 0-100 Good
Yellow 101-200 Average
Red 201+ Poor

Filter Replacement Indicator: The Replace HEPA light on the display will illuminate and flash indicating that it is time to replace your filter. Replace the filter according to directions (E8) then press and hold the TIMER button on your purifier for 5 seconds to reset the system.Your app will notify you and also display a banner when it is time to replace the filter.UV Bulb Replacement Indicator: The “UV” light on the display will flash when it is time to replace the UV bulb. Replace the bulb according to the direction (E9).To reset the UV-C Replacement Indicator, press and hold the UV button to reset the system. Hold for 5 seconds and change reset to restart.Your app will notify you and also display a banner when it is time to replace the bulb.*Control Panel Beep/Sound: The sound emitted from pressing the buttons on the control panel can be turned off/on by holding the SPEED button for 5 seconds.Visit this products page on www.guardiantechnologies.com for more information regarding the use of the Guardian Technologies app.

FILTER REPLACEMENT

The Replace HEPA light will flash continuously indicating that it is time to replace your filter. Replace the filter according to directions then restart the system.Depending on usage, the filter will last approximately 6-8 months.

  1. Turn off and unplug the unit.
  2. Press the lock and release button and remove the rear cover from the unit.
  3. Remove the used Combination Filter (Filter B) and dispose of it in the garbage.
  4. Insert filter system into the unit.Consult the arrow on the filter for correct installation direction.
  5. To reset the filter indicator press and hold the timer button for 5 seconds.

CHECKING AND MAINTAINING FILTER

Maintain the filter by checking it frequently.Depending on air quality conditions, you may need to replace it more frequently.Vacuum the carbon filter layer as needed to remove loose debris and dust and to help prolong the life of your HEPA filter. (Refer to pg. E5 for filter layers view).To check the status of the HEPA filter, peel back the carbon layer to expose the pleated HEPA Filter. If the HEPA Filter is no longer white and is covered in grey dust/dirt it should be replaced.IMPORTANT: Do NOT try to wash and re-use the Combination Filter.IMPORTANT: To maintain the performance of the air cleaner, use Guardian TechnologiesGENUINE Replacement Parts only.

INSTALLING & REMOVING UV-C BULB

UV Bulb Replacement Indicator: The UV light on the display will flash when it’s time to replace the UV bulb.

  1. Turn off and unplug the unit.Press the lock and release button and remove the rear cover from the unit.
  2. Remove the combination filter.
  3. Use a Philips head screwdriver to remove 2 screws and detach the UV-C Metal Shield.
  4. The UV-C Bulb is removed by carefully grasping the bulb with a clean cloth or tissue and pulling the bulb straight out of the unit.
  5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit.
  6. To reset the UV-C Replacement Indicator, press and hold the UV button for 5 seconds

NOTE: Do NOT stick any foreign objects or your fingers inside of the unit.CAUTION: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product.NEVER use alcohol or other solvents.

TROUBLESHOOTING GUIDE

PROBLEM

SOLUTION
The unit does not operate. Check that the unit is plugged in.Check that filter is in place.Confirm that filter is Genuine Replacement FilterCall Customer Service.
The unit shuts off unexpectedly. Check that unit is plugged into a working electrical outlet.Check that the HEPA filter is firmly in place.Check that the Rear Cover is latched firmly in place.Call Customer Service.
No air circulating from the unit. Unplug unit. Check Filter.Clean Pre-/Carbon Filter if necessary.Replace HEPA filter if necessary.
Increase in noise level. Make sure the filters are clean. Replace if necessary.
App will not download. Check to make sure you have most recent update on your smartphone.
Not “LINKING” / finding Wifi or Bluetooth®. Check that the device is plugged in. Make sure the smartphone is within the arm’s length of the purifier.Make sure that the light is blinking blue.
The Air Quality Monitor is consistently reading high. Clean out the sensor on the right side of the unit with canned air or a vacuum hose.
The light in the center of the display screen is flashing red. On the Guardian Technologies App, hit the menu in the top right button of the window and select“Wifi Setting” button. Set up the connection again.

What is CADR?CADR stands for “Clean Air Delivery Rate,” which indicates the volume of filtered air delivered by an air purifier. CADR ratings show the effectiveness of how efficient the air purifier is at capturing fine particles from things like tobacco smoke and plant pollens from the room.Clean Air Delivery RateFrom air cleaner to air cleaner, compare the CADR numbers. First look at the suggested room size. Then refer to the Clean Air Delivery Rate (CADR) numbers. The higher the number, the faster the unit filters the air.Refer to the website for individual model CADR numbers.

LIMITED WARRANTY

To the consumer, Guardian Technologies LLC warrants this product to be free of defects in materials or workmanship commencing upon the date of the original purchase. In order to be eligible for this Limited Warranty, an original sales receipt or comparable substitute proof of purchase bearing the date of original purchase is required. Refer to the original product carton or specific product/model page on the Guardian Technologies website for warranty length for your particular model. This warranty applies only to the original purchaser of this product from the original date of purchase. This warranty covers products purchased from authorized distributors only.This warranty applies to the repair or replacement of products found to be defective in materials or workmanship. This warranty does not apply to damage resulting from unusual wear, commercial, abusive, unreasonable use, or supplemental damage. This warranty does not cover damage from unauthorized repairs or from any use not in accordance with the instruction manual. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty.If this product should become defective within the warranty period, we will repair or replace any defective parts free of charge. All warranty repairs must be completed by Guardian Technologies LLC. This warranty gives you specific legal rights and you may also have other rights (other rights may vary from state to state in the U.S.A.)To submit product under warranty the complete machine must be delivered pre-paid to GuardianTechnologies LLC.Please include complete information including the problem, the model number of the product, the day of purchase, and a copy of the original sales receipt along with your name, address, and telephone (email optional). Address returns to the attention of Customer Service, at the address below. Additional questions or comments can be madetoll-free to the number listed below.

USA and CanadaGuardian Technologies LLC26251 Bluestone Blvd.Euclid, Ohio 441321.866.603.5900www.guardiantechnologies.com

Please go to www.guardiantechnologies.com to register your product. We consider the registration process important to ensuring superior service to our customers, however, submitting the warranty registration is optional and does not affect your rights to utilize this warranty according to the conditions stated above.Additional copies of the instruction manual can be obtained by accessing and printing directly from our website or calling customer service.The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Guardian Technologies is under license.Other trademarks and trade names are those of their respective owners.Amazon, Echo, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

©2016 Guardian Technologies LLC

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,