hama 00137496 Bluetooth Mono Headset Instruction Manual

The Smart Solution

00137496

“My Voice 640”Bluetooth ® Headset

Operating instruction

Controls and Displays

1. Multi-Function Key
2. Charging Socket
3. Status LED
4. Microphone
5. [VOLUME +] button
6. [VOLUME -] button

report this ad

Thank you for choosing the Hama product.Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes WarningThis symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.NoteThis symbol is used to indicate additional information or important notes.
2. Package Contents• 1x MyVoice 640 Bluetooth ® headset (A)• 1x USB charging cable (B)• 1x Ear hooks (C)• These operating instructions
3. Safety Notes• The product is intended for private, non-commercial use only.• Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.• Do not allow yourself to be distracted by the product, for example when driving a vehicle or operating sports equipment. Always pay attention to the surrounding traffic and your environment.• Do not drop the product and do not expose it to any major shocks.• Do not operate the product outside the power limits given in the specifications.• Do not open the device or continue to operate it if it becomes damaged. Warning –Battery• Only use suitable charging devices or USB connections for charging.• As a rule, do not charge devices or USB connections that are defective, and do not try to repair them yourself.• Do not overcharge the product or allow the battery to completely discharge.• Avoid storing, charging, or using the device in extreme temperatures and extremely low atmospheric pressure(for example, at high altitudes).• When stored over a long period of time, batteries should be changed regularly (at least every three months). Warning –High volumes• High sound pressurelevel!• Thereisarisk of hearing damage.• To prevent hearing loss, avoid listening to high volume levels for long periods.• Always keep the volume at a reasonable level. Loud volumes, even over short periods, can cause hearing loss.• Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.
4. Getting Started• The headset is equipped with a rechargeable battery. The battery must be fully charged before using the device for the first time.• Ensure that the headset is switched off before changing it.• Begin charging by connecting the included USB charging cable to the charging socket (2) as well as to the USB connection of a PC/ laptop.• Alternatively, you can charge the headset using a suitable USB charger. Please refer to the operating instructions for the USB charger used.• The status LED (3) lights up constantly in red during the charging process.• Charging the battery fully may take up to 2hours.WarningDo not use the headset while it is charging.• When the battery is fully charged, the status LED (3) is constantly lit blue.• Disconnect all cable and mains connections after use.NoteIf you have not used the item for a few months, it may take 15-30 minutes for the status LED (3) to red when charging.
5. OperationSwitching the headset on/off• Turn On:With the device off, press and hold the multi-function key (1) for 3seconds until you hear a short tone. The LED indicator (3) lights up blue and a voice says, ‘Power On’.• Turn Off:With the device on, press and hold the multi-function key (1) for 10 seconds until you hear along with tone. The LED indicator (3) briefly lights up and a voice says, ‘Power Off’.The first time the device is turned on, pairing is automatically started–see 5.1 Bluetooth ® pairing.5.1. Bluetooth ® pairing Note –Pairing• Make sure that your Bluetooth ® -capable terminal device is on and Bluetooth ® is activated.• For more information, please refer to the operating instructions of your terminal device.• The headset and the terminal device should not be any further than 1metreaway from each other. The smaller the distance, the better.• Ensure the headset is off.• Device off With the device off, press and hold the multifunction key (1) for 3seconds until you hear a short tone. The LED indicator (3) lights up blue and a voice says, ‘Power On’.• Device on Press and hold the multifunction button (1) for approximately 3seconds until the status LED (3) begins to alternate between red and blue and you hear a voice say, ‘Pairing’.The headset is searching for a Bluetooth ® connection.• Open the Bluetooth ® settings on your terminal device and wait until MyVoice 640 appears in the list of Bluetooth ® devices found.• Bluetooth ® devices found.• Select MyVoice 640 and wait until the headset is listed as connected in the Bluetooth ® settings on your terminal device. Note – Bluetooth ® passwordIf your terminal device requests apasswordtoestablish the connection, enter 0000. NoteIf the pairing was successful, the status LED (3) flashes blue slowly.A voice says, ‘Connected’.• Youcan now use the headset.5.2. Automatic Bluetooth ® connection (after successful pairing) Note• Make sure that your Bluetooth ® -capable terminal device is on and Bluetooth ® is activated.• For more information, please refer to the operating instructions of your terminal device.• Make sure that the headset is switched on.• After the headset and terminal device have been paired, a connection is established automatically.• Youcan now use the headset. Note• If the pairing was successful, the status LED (3) flashes blue slowly. A voice says, ‘Connected’.• It may be necessary to change the settings on your terminal device to enable it to automatically connect to the paired headset. Note -Connection impairedAfter the headset and terminal device have been paired, a connection is established automatically.If the Bluetooth ® connection is not established automatically, check the following:• Check the Bluetooth ® settings of your terminal device to see whether MyVoice 640 is connected. If not, repeat the steps listed under 5.1 Bluetooth ®pairing.• Check whether obstacles are impairing the range. If so, move the devices closer together.• The performance can also be affected by a weak battery.5.3. Multi-pairing• The headset can be paired with two-terminal devices at once so that, for example, you can use a private and business mobile phone simultaneously.• To begin with, activate Bluetooth ® only on the first terminal device that you wish to pair.• Pair the first terminal device with the headset as described in 5.1 Bluetooth ® Pairing.• Switch off the headset as described in 5Operation (Switching off).• Activate Bluetooth  ® on the second terminal device.• Continue as described in 5.1 Bluetooth ® Pairing.• Once the second terminal device is connected, open the Bluetooth settings on the first terminal device and select MyVoice 600.• Now both terminal devices are connected to the headset.5.4. Hands-free function Note• Note that support for certain key functions may vary depending on your terminal device.• For more information, please refer to the operating instructions of your terminal device. You can use the headset as a hands-free set for your mobile phone.Making a call• Dial the number directly on your terminal device to make a call.Accepting calls• Press the multifunction button (1) once to answer an incoming call.Rejecting an incoming call• Brieflypress the multifunction button (1) twice to reject an incoming call. You will hear a short tone.Ending a call• During a call, press the multifunction button (1) once to end the call.Redial• Brieflypress the multifunction button (1) twice to call the last number.• You will hear a short beep.Voice assistant• To activate the voice assistant (for example, Siri, Google Assistant) integrated into your smartphone or another device, press the Multifunction button (1) on your headphones until you hear an initial tone. Shortly afterward, you will hear a second tone; you can now begin with your voice navigation. Note –SiriSiri is only available on suitable terminal devices with iOS 5or higher (from iPhone 4s onwards). Note –Google Assistant• The Google Assistant is only available on suitable terminal devices with Android 5.0 or higher, Google Play Services, >1.5 GB of free memory, and a minimum screen resolution of 720P.• The Google Assistant app must be available on your terminal device and set as the default voice assistant.5.5. Volume control• Press the [VOLUME -] button (6) to reduce the volume.• Press the [VOLUME +] button (5) to increase the volume.5.6. Audio playback• Press and hold [VOLUME -] button (6) to skip to the previous title.• Press and hold [VOLUME +] button (5) to skip to the next title.5.7. Disconnecting the headset• Switch the headset off.• Disconnect the headset via the Bluetooth ® settings on your terminal device.5.8. Battery level• If the battery level is low (<25%), a voice says “low battery, please charge” and the status LED (3) flashes slowly.• Charge the headset as described in 4. Getting Started. NoteHowever, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth ®devices, usage settings, usage styles, and environments.
6. Care and Maintenance Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.
7. Warranty DisclaimerHama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.
8. Technical Data

   	Bluetooth ® Headset
   Bluetooth ® technology	Bluetooth ® v5.0
   Supported profiles	A2DP V1.3, AVRCP V1.6,HFP V1.7, HSP V1.2
   Frequency of Bluetooth ® transmissions	2402 –2480 MHz
   Range	<10m
   	Battery
   Battery type	3,7 Vlithium polymer
   Min. Capacity	90 mAh
   Input	max. 5V 65 mA
   Charging time	~2.5 –3h
   Standby	~180 h
   Music Play Time	~6h
   Talk Time	~7h

9. Recycling InformationNote on environmental protection:After the implementation of the European Directive 2012/19/ EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/ Batteries, you are making an important contribution to protecting our environment.
10. Declaration of ConformityHereby, Hama GmbH &CoKGdeclares that the radio equipment type [00137496] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00137496 -> Downloads.

References

• 
  hama.com