hama 00200115 USB Hub Operating Instructions
1. Package Contents
- USB-A Hub
- USB cable
- Power supply unit
- These operating instructions
2. Safety Notes
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children!
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- The product is intended for indoor use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, adapter cable or power cable is damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Ensure that the total power consumption of all connected terminal devices does not exceed 2500 mA.
- Bus-powered operation (without power supply unit) USB 2.0 → max. 500 mA / USB 3.0 → max. 900 mA / USB-C → 3000 mA
- Consult the operating instructions or the technical specifications of the connected devices and your computer.
- It is essential that you observe these specifications and the safety instructions regarding the power supply of your devices.
3. Startup and Operation
Warning
- Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
- If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
- If you will not be using the product for a prolonged period, disconnect it from mains power.
- Switch on your computer and boot the system.
- First connect the enclosed power supply unit to a socket and then to the hub.
- Connect the product to a free USB port on your computer.
- You do not have to install drivers; the computer will automatically recognise the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
4. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
5. Technical Data
Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions expected, and subject to technical changes. Our general terms of delivery and payment are applied.
00200115/ 08.21
References
[xyz-ips snippet=”download-snippet”]