Harry Potter Ri-210HP WALKIE TALKIES Installation Guide

Table of Contents

WALKIE TALKIES

Model: Ri-210HP

Important Message to Consumers

Thank you for purchasing one of our top-quality electronic products. Please take a moment to read through these instructions to help you understand the safe and proper way to use this toy to extend its usability.Keep these instructions for future reference as they contain important information.

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

For further information, please contact your local or regional authorities.Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

Installing the Batteries

Note: Batteries should always be installed by an adult.

Using a Phillips screwdriver, open the battery compartment door located on the bottom of the unit.
Insert 2 AAA (R03) batteries into each Walkie Talkies with + and – terminals as indicated in the compartment.
Replace battery compartment door. Do not overtighten screw.

Battery Installation

Battery Use Cautions and Tips for Safety & Best Performance

Only use the recommended/supplied batteries or equivalent.
Use alkaline batteries for longer life.
Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries.
Insert batteries with proper polarity (+/–) as indicated.
Remove exhausted batteries from product.
Recharge rechargeable batteries under adult supervision.
Do not attempt to recharge non-rechargeable batteries.
Do not open batteries or heat them beyond normal ambient temperatures.
To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer.
Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin contact occurs, wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur.
Store in cool, dry, ventilated area away from hazardous or combustible material.
Do not dispose of batteries in the household trash or fire.
Follow applicable laws and local regulations for the disposal and transportation of batteries.
Rechargeable batteries are to be removed from the toy before being charged.
The supply terminals are not to be short-circuited.
Do not dispose of batteries in fire; batteries may leak or explode.
Batteries should be replaced by an adult.
Remove all packaging before giving to your child.

Turning On/Power Off

Turn the Power/Volume Knob right (clockwise) to turn on the Walkie Talkies. The Power LED will light to indicate unit is ON.
Both Walkie Talkies must be turned on in order to send and receive messages.
Turn the Power/Volume Knob left (counterclockwise) to shut off the Walkie Talkies.

Speaking

Press and hold the Talk Button while speaking into the Microphone. Release Talk Button to listen. Adjust volume using Power/Volume Knob.

You Should KnowFor clear transmission, keep the antenna pointing upwards and the microphone approximately two inches from your mouth.

Listening

Both Walkie Talkies must be turned on and have their antennas pointing upwards in order to send and receive messages (speak and listen).
Messages cannot be received while the Talk Button is being pressed. Release the Talk Button to listen.
Messages can be heard through the Speaker.

Playing Games

Walkie Talkies can be used for all kinds of fun games and activities. Here are two suggestions:

Hide and SeekJust like regular Hide and Seek, but with a twist: the “Hider” can send clues to the “Seeker” using the Walkie Talkies.Mystery SoundsCan you recognize the mystery sound? One kid sends a sound over the Walkie Talkies, while another tries to guess what the sound is. Examples can include an animal, song, TV show, or anything else!

Troubleshooting

If you experience any of the following problems please insert 2 fresh new AAA (R03) batteries into each unit.

If one or both of the Walkie Talkies do not work, this may indicate that the batteries are weak.
If the signal range of the Walkie Talkies decreases notably, this may indicate that the batteries are weak.

Please keep in mind that this product does not transmit well through obstacles such as trees, buildings, and metal structures.If there is a sizable increase in static, it may be due to the proximity of electric motors, fluorescent lights, power lines, or other signal-disrupting objects. You may have to change your location.If problems persist, DO NOT ATTEMPT TO REPAIR THE UNIT. See the Warranty for factory services.

Maintenance

It is important to keep the Walkie Talkies as dry and clean as possible. You may clean the cabinet with a cloth or sponge moistened with mild soap and water. Do not attempt to use strong cleansers or solvents, as they may cause damage.

Questions or Comments

For questions or comments regarding this or other ekids products, please call our toll-free number: 1-888-TOP-TOYS Also visit our website: www.ekids.com

If problems persist, please do not attempt to repair unit; see warranty for factory service.

Questions? Visit www.ekids.comFor any other questions: 1-888-TOP-TOYS Toll Free1299 Main Street Rahway NJ 07065

EC Declaration of Conformity

1	Identification Number: Ri-210HP.UFXv9
2	Name and address of the manufacturer:
Company: eKids, LLC / KIDdesigns, Inc.Address: 1299 Main Street, Rahway, NJ 07065, USA
3	The declaration of conformity is issued under the sale responsibility of KIDdesigns, Inc.
4	Object of the declaration:
Product Description:	Harry Potter Wizarding World Walkie Talkies	(Add Product Image here)
	Product Color:	Black, Tan, Red & Gold
	Product Size:	+/- 35mm (D) x 171.2mm (H) x 71.2mm (L)
5	The object of the declaration described in 4 is in conformity with the relevant Community harmonization legislation listed below: – Toy Safety Directive 2009/48/EC– The UK Toy (Safety) Regulations Requirement– Radio Equipment Directive 2014/53/EU– RoHS Directive 2011/65/EU Annex II & amendment (EU) 2015/863– EMC Directive 2014/30/EU– Packaging Directive 94/62/EC– WEEE Directive 2012/19/EC– REACH Regulation (EC) No. 1907/2006 & amendments (EU) No. 1272/2013; No. 552/2009; (EU) 2018/2005
6	Relevant harmonized standards used are listed below: – ETSI EN-301 489-1 V2.2.3: 2019 / ETSI EN-301-489-17 V3.2.2: 2019– EN71-1: 2014 +A1:2018– BS EN71-1: 2014 +A1:2018– EN71-2: 2011+A1: 2014– BS EN71-2: 2011+A1: 2014– EN71-3: 2019– BS EN71-3: 2019– BS EN IEC-62115:2020 +A11:2020 Safety of Electric Toys– EN-300 328 V2.2.2 (2019)– ETSI EN 300 220-2 v3.2.1:2018 / ETSI EN 300 220-2 v3.1.1:2017– EN55032:2015/A11:2020– EN 55035:2017/A11:2020– EN-60825-1– BS EN-60825-1– EN-62479:2010– EN IEC 61000-3-2:2019– EN 61000-3-3:2013+A1:2019– EN 62368-1:2014+A11:2017
7	Additional information: The object of declaration is in conformity with the following standards / regulations:– REACH Phthalates : ANNEX XVII Entries 51 & 52– REACH Cadmium : ANNEX XVII Entry 23– REACH PAH’s : ANNEX XVII Entry 50