HEADRUSH B00NC7627S Wireless Speaker Instruction Manual

WIRELESS SPEAKERBOOMHRSP 5008T8017766/7INSTRUCTION MANUAL

The Bluetoot® word mark and logos are registered trademarks owned by Bluetooth®SIG, Inc., and any use of such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.

WHAT’S INCLUDED:

• Wireless speaker
• USB charging cable
• 3.5mm audio cable
• Instruction Manual

PRODUCT OVERVIEW

You can use this item with iPads®, iPhones®, iPods®, and many types of smartphones to stream music, and enjoy hands-free calling. In order to get the best results when using this device, please read this manual first before using it.

FEATURES

• Volume and song control directly on the speaker
• Stunning sound clarity
• Ultra-portable design
• Great for parties
• Allows you to make and answer phone calls
• Operation time up to 6 hours (medium volume level)

IMPORTANT SAFETY PRECAUTIONS

When using your Bluetooth® speaker, basic safety precautions should always be followed, including the following:

1. To avoid electrical hazards, do not expose to water or moisture.
2. Keep this product and its charging cable away from excessive heat.
3. Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.
4. Do not disassemble your device.
5. Only use your device on a flat, stable surface.

A QUICK LOOK AT YOUR DEVICE

1. PreviousPress to access the previous track in a playlist. Press and hold to lower the volume.
2. PhonePress this button to activate the speakerphone function. When music is playing, press to play or pause a track.
3. NextPress to access the next track in a playlist. Press and hold to increase the volume

1. Charging PortYou can plug one end of the included USB charging cable into this jack, while plugging the other end into a USB port on your computer in order to charge your speaker’s built-in lithium battery.Aux inPlugin the supplied audio cable to connect to your device using a wired connection.NOTE: The buttons on the speaker only function in Bluetooth¹g mode.
2. ON/OFF SwitchSlide this switch to the ON position to power ON your speaker. Slide this switch to the OFF position to the power of your speaker.

CHARGING YOUR SPEAKER

1. Connect one end of the included USB charging cable to the charging port on your Then plug the other end of the USB charging cable into a suitable USB port on your computer to recharge your speaker’s internal rechargeable battery.NOTE: The internal battery of your speaker takes approximately two hours to charge when completely drained.
2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn OFF when your unit is fully charged.

UNDERSTANDING THE LED STATUS LIGHTS

• When charging your speaker
• A solid red LED = charging
• Red LED OFF = charge completely
• When pairing your speaker to Bluetooth® audio source
• Quick blinking blue LED =Bluetooth not connected, ready to pair
• Slow blinking blue LED=Bluetooth& connected

PAIRING BLUETOOTH” DEVICES TO YOUR SPEAKER

In order to pair your Bluetooth® audio device to your Bluetoothg® speaker for the first time, follow the steps below:

1. Make sure your Bluetooth® audio source is held within three meters of your speaker.
2. Slide the ON/OFF switch on your speaker to the ON position. The LED light will blink blue to indicate that you have entered pairing status.
3. Go to the Bluetooth® Manager of your Bluetootfrg audio source. Please refer to the User’s Manual of your Bluetooth® audio source for more information.
4. Search Bluetooth® devices and select your speaker to start connecting. Look for name “HR Port Spkr”.
5. Once paired, the blue LED light will blink slowly and you can use your speaker to listen to audio from your Bluetooth® audio source.

USING THE HANDSFREE FUNCTION

When a smartphone is connected to your speaker follow the steps below to take calls hands-free.

1. Press to pick up the call.
2. Press and hold for two seconds to reject the call.
3. During a call: Press again to hang up the call.

SPECIFICATIONS

Loudspeaker: 40 3WBuilt-in Power: Li-Ion 400mAhSNR: 80 ±3 dB WirelessWorking Frequency: 2.402 – 2.480 GHzWireless Transmission Distance: up to 10m (33 ft.)Weight: 165g Charging Time: 2 hoursNOTE: This speaker is in compliance with the specified BluetootW’version. It does not guarantee compatibility with all the functions on every Bluetooth® enabled device. Please check your smartphone’s user manual for compatibility and functionality.Troubleshooting

The speaker doesn’t con to the device

• Speaker needs to be connected/re-paired to the device

A tone is heard every few seconds

• Speaker needs to be charged

The speaker will not power ON

• Speaker needs to be charged

The speaker doesn’t control track(s)/volume

• Speaker needs to be in Bluetooth mode for full control

The speaker distorts at high volume

• The devices’ volume needs to be lowered

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

THE FCC WANTS YOU TO KNOW

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip­ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Industry Canada Notice

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC: 255A-8017766

THE SOURCE – WARRANTY

The Source warrants that this product will be free from defects in materials and workmanship for a period of 12 months from the date of purchase. Within this period, simply take the product and your proof of purchase to any The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty. This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces, and other governmental entities in which The Source operates. This warranty is subject to all statutory rights you may have in Canada.Imported by: The Source, Barrie, Ontario, Canada, L4M 4W5Manufactured in Chinawww.headrushaudio.com Please Recycle2018The Source All rights reserved.