USER MANUALRead the manual carefully and ensure you have fully understoodits contents before operating this device for the first time.
Important Safety Instructions
Important Notice
Paragraphs beginning with the symbol 
indicate important instructions, tips, or conditions for the following settings.
For your own safety and the optimal performance of your TV, ensure to read the safety instructions before performing any installation.Compatibility with 3rd party products, software, and services are not guaranteed. We cannot be held liable for any damage or loss suffered whilst operating, using or connecting to incompatible devices or apps.The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights of the content you wish to record or playback.Read these instructions
Follow all instructionsHeed all warningsKeep these instructionsAll rights reserved.
Safety Instructions
To ensure safe and correct use of this product, always comply with the following precautions to avoid dangerous situations and damage to your unit:
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in thethe literature accompanying the appliance.
AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage.
Class II product: This symbol indicates that it does not require a safety connection of protective earthing (ground).
The intended use and ambient conditions for this TVThis TV is intended for the rendering of video and audio signals, on a table-top or wall-mounted, in a home or office environment. It must not be used in rooms with a highlevel of humidity or dust concentration. The warranty is only valid if used as intended by the manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device. To reduce the risk of fire or electrical shock:– Do not expose this unit to rain, moisture, dripping, or splashing water, and do not place objects filled with liquids, such as vases, cups, etc. on or over the unit.– Do not touch the TV with wet hands.– Do not expose to direct air-conditioning and keep candles or other naked flames away from the TV at all times.If the TV is moved from a cold environment to a hot environment, leave it switched off for at least an hour to avoid condensation. If used outside, make sure it is protectedfrom moisture.If you notice anything unusual, immediately remove the power plug.In case of fire, use preferably a CO2 gas or powder fire extinguisher. If such extinguishers are not accessible, try to isolate the electrical supply before using a water fire extinguisher.
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:– Using cabinets or stands recommended by the manufacturer of the television set.– Only using furniture that can safely support the television set.– Ensuring the television set is not overhanging the edge of the supporting furniture.– Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and television set to a suitable support.– Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.– Educating children about the dangers of climbing on furniture to reach the television set or its controls.If your existing television set is being retained and relocated, the same considerations as above should be applied.
- Moving/TransportationBefore moving this TV, disconnect all cables and move in the vertical position only. Grasp the device on the upper and lower edges of the frame.– Do not press or put stress on the front panel of the TV. It may take two or more people to carry larger TVs.If you have to briefly lay down the TV, place the unit with its entire front surface lying flat on soft material.The LED screen is made of glass and can break if is not handled properly. Always wear rubber gloves to carry the unit. If the LED screen is damaged, liquid crystal might leak out. In case of skin contact, immediately rinse thoroughly with water.
- Power SupplyIncorrect voltages can damage the TV. Only connect this unit to a power supply with the correct voltage and frequency noted on the type plate, using the supplied power cable.The power plug must be easily accessible so that the device can be disconnected at all times. The unit is live, even if in standby mode, as long as the unit is connected toa power outlet.It is recommended that this unit is placed on a dedicated circuit.– Do not overload the power outlets by connecting too many appliances to the same outlet. Overloaded wall outlets, extension cords, etc. are dangerous and can result in electric shock and fire.After power off, don’t turn it on again in 5 seconds. Frequent switching power supply in a short period of time can cause abnormal TV.
- Power plug and power cable– Do not touch the power plug with wet hands.– Do not place heavy objects on the power cable. Route the cable so that it is not kinked or laid over sharp edges, walked on or exposed to chemicals. A power cable with damaged insulation can cause electric shock and fire.– Pull the power plug, NOT on the cable when disconnecting. The cable can become damaged and cause a short circuit if pulled on.– Do not place the power cable near a high-temperature object.– Do not move the TV with the power cable plugged into a socket.– Do not use a damaged or loose power cable, or a damaged socket outlet.– Do not use any power cords other than the one supplied with this unit.
- Set-upCheck that the location is suitable to bear the load of the TV. Place on a level, sturdy and horizontal base. Ensure that the unit does not hang over the edge of the basewhen placed in or on furniture. If placed on a cart, use caution when moving to avoid the unit from tipping over.– Place the unit in a normal upright horizontal position. It must never be operated vertically, lying flat or hanging overhead from the ceiling.– Place the unit where it is not exposed to direct sunlight or other sources of heat. When mounting the TV on a wall, follow the instructions supplied with the wall- mount, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
- Air ventilation and high temperaturesInstall your TV only where there is proper ventilation, and ensure that there is at least 10 cm free space on the sides and 20 cm above the unit for air circulation. Excessiveheat and obstruction of ventilation could lead to fire or early failure of some electric components.– Do not block any ventilation openings with newspapers, tablecloths, curtains, etc.– Do not dry clothing etc. on top of the unit.– Take care not to touch the ventilation openings since they may become hot.– Do not insert foreign objects into the TV through the vents.
- The Stand– Do not use any stand other than the one supplied with this unit.– Do not modify or use the stand if it becomes warped or physically damaged.– During setup, make sure that all the screws are securely tightened.– Ensure that the TV does not suffer any impact during the attachment of the stand.– Ensure that children do not climb onto the stand.– Attach or remove the stand with at least two people.
iods of time. Doing so may produce some temporary distortion effects on the screen. - Radio waves– Do not use the TV in any medical institutions or locations with medical equipment. Radio waves may interfere with medical equipment and cause malfunction.– Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with automatic control equipment and cause malfunction.If you have a cardiac pacemaker, keep a distance of at least 22 cm from the TV. Radio waves may interfere with the operation of a pacemaker.
- Built-in wireless LAN– Do not connect to wireless networks that you do not have the usage rights for. Data transmitted and received over radio waves may be intercepted and monitored.The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from devices such as other wireless LAN devices, microwaves, mobile phones, and other devices that use 2.4 GHz and 5 GHz signals.
- Warning about off-gassingNew furniture, carpet, paint, building materials, and electronics can release chemicals into the air through evaporation. After you set your TV up and turn it on for the first time, you may notice a slight smell within a couple of hours. This is because some components of TV are heating up for the first time. The materials that we usefully meet the environmental requirements and regulations. Your TV is working just fine and the fumes from the off-gassing will diminish eventually.
- Supervision– Do not let children play unsupervised close to the TV. It could tip over, be pushed off or pulled down from the stand surface and injure someone.– Do not allow a switched-on TV to run unattended.
- VolumeLoud music and noises can lead to irreversible damage to your ears. Avoid extreme volume, especially over long periods and when using headphones. If you hear a drumming noise in your ears, turn down the volume or temporarily stop using headphones.
- Thunder StormsPull out the power plug and all connected antenna cables from the TV during a thunderstorm. Overvoltage caused by lightning strikes can damage the TV via the antenna system, as well as the wall socket.
- Long periods of absenceAs long as the power plug is connected to a live socket outlet, the TV will consume power even in standby mode. The power plug and all connected antenna cables should be disconnected out during long periods of absence.
- Cleaning and careCAUTION:Unplug the power cord prior to cleaning the TV.Clean the TV, the screen, and the remote control with a soft, moist, clean, and color-natural cloth only. Do not use any chemicals.Do not subject the surfaces to insect repellent, solvent, thinner, or other volatile substances. This may degrade the surface quality.Do not spray water or other liquids directly on the TV. The liquid inside could lead to product failure.The surface of the display panel is treated and may be easily damaged. Take care not to scratch it with fingernails or other hard objects.Also wipe the power plug with a dry cloth at regular intervals.
- Service/RepairNever remove the cover/back of the there are no user-serviceable parts inside. Refer all services to qualified service personnel.
- PackagingKeep the anti-moisture materials and plastic bags out of reach of children.Plastic bags can cause suffocation and the anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital.
- ModificationDo not attempt to modify this product in any way. Unauthorized modification could void the warranty of this unit, cause electric shock and fires.
- Remote Control batteries– Incorrect installation may cause battery leakage, corrosion, and explosion.– Replace only with the same or equivalent type.– Do not mix old and new batteries.– Do not mix different battery types.– Do no use rechargeable batteries.– Do not burn or break up batteries.– Be sure to dispose of batteries correctly.– Do not expose batteries to excessive heat such as sunshine, fire, or the like.
- Outdoor Antenna Grounding If an outdoor antenna used, be sure the antenna system is protected against voltage surges and built-up static charges.
- DisposalRefer to the recycling section of this manual.
iods of time. Doing so may produce some temporary distortion effects on the screen.Contents
Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance.Parts of the software function changes with the system upgrade.
Accessories List
The following accessories are included with the TV:
| User Manual ×1 | Screw × 4 | Base Stand × 2 |
| AAA Battery × 2 | Remote Control × 1 | Power Cord × 1 |
| Warranty Card × 1 |
NOTEThe accessories may be different from the list above due to different models, countries/regions. Please refer to the actual accessory bag.SIMPLIFIED EU DECLARATION OF CONFORMITYHereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ERF3A80 / ERF3B80H / ERF3C80H / ERF3D80H / ERF3E80H / ERF3H80H/ ERF3I80H / 50E76GQ / 50E77GQ / 50E78GQ / 50E79GQ / 50E76GQCH / 50E77GQCH / 50E79GQNE / 50E76GQTUK / 50E77GQTUK] is in compliance withDirective 2014/53/EU. The full text of the EU declaration of conformity is available atthe following internet address: http://global.hisense.com/downloads
Installing the Stand or Wall mount bracket
C
AUTIONBe sure to disconnect the AC power cord before installing a stand or wall mount brackets.The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure.After the installation is completed, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.Installing the standFollow the illustrations and textual instructions below to complete the installation steps:
- Carefully place your TV face-down on a soft, flat surface to prevent damage to the TV or scratching to the screen.
- Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
- Secure the stands to the TV with the 4 screws in the accessory tightly.
.
Installing the Stand or Wall mount bracket
Installing the wall mount bracketBefore mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV.CAUTIONWhen mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury.
- Place spacers between the TV and bracket.
- Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees.
- Standard dimensions are shown below.
Wall mount hole pattern (mm) 300 × 200Wall mount screw size M6
NOTES
- The diameter and length of the screws differ depending on the wall mount bracket model.
- The wall mount bracket is optional. Your TV may not have a wall mount bracket. Please refer to the actual accessories.
TV Front
Remote sensor/Power indicator/Single button (Standby/Source)
| Item | Description |
| Remote sensor | Receive remote signals from the remote control.Do not put anything near the sensor, as its function may be affected. |
| Power indicator | The light is red in standby mode. |
|
|
Press the single button when in standby mode, and the TV will be turned on.
Press the single button to call up the menu. When the focus is on “Power Off”, wait for 3 seconds, and then the TV will go into standby mode automatically. Press the single button to call up the menu, and then select among the different input signal sources. |
Standby / SourceNOTES
- The Picture is Only for Reference.
- Powering on the TV requires several seconds to load programs. Do not rapidly turn the TV off as it may cause the TV to work abnormally.
TV Rear
NOTES
- ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A max.)
- Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.
- Not all A/V devices have the ability to connect to a TV. Please refer to the user’s manual of your A/V device for compatibility and connections procedure.
- Before connecting external equipment, remove the mains plug from the wall socket. Otherwise, it may cause electric shock.
- Service jack is not available for you to connect an external device. It can only be used by our factory for testing purposes.
LAN (Wired setup)Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.
- · It is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have DHCP. Wireless setupTo connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below.
- · The built-in Wireless LAN Adapter supports the IEEE 802.11a/b/g/n/ac communication protocols. It is recommended to use an IEEE 802.11n router. Low transfer rates for b/g may have an influence on the quality of streaming videos and other media.
Wireless setupTo connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below.
NOTES
- You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapters.
- If the wireless router supports DHCP, your TV can connect more easily to the wireless network.
- If you apply a security system other than the systems listed below, it will not work with the TV. Security system: WPA, WEP, WPA2.
- In order to guarantee a smooth network, the distance between the router and TV should be less than 10 meters.
| ANT |  |
|
| DIGITAL
AUDIO OUT |
 |
|
| HDMI | HDMI
(eARC) |
 |
| HDMI |  |
|
| AV IN |  |
|
| HEADPHONE |  NOTE• Excessive sound pressure from earphones and headphones can cause hearing loss. |
|
| COMMON
INTERFACE |
|
|
| USB | 
|
Remote Control
- INPUT: Select input sources
- POWER: Switch the TV on or into standby mode
- Number button: Direct channel selection or numbers input
- GUIDE: Display the Electronic Program Guide (DTV mode)
- CH.LIST: Display the Channel List on the screen
- Special function buttons
- Display the Quick setup menu
- Media content control function buttons
- Λ/∨ / < / >: Allow you to navigate the on-screen menus and adjust the system settings to your preference
- OK: Confirm the selection in the on-screen menus
- BACK: Return to the previous menu
- EXIT: Exit the menu
- HOME: Enter the Home screen
- VOL + /-: Adjust the volume
- CH Λ/∨ : Switch channel
- MIC: Activate the microphone
- SUBTITLE: Activate or deactivate the subtitle mode
- INFO: Display the present program informationTEXT: Turn on/off the Teletext function
- MUTE: Mute or restore the TV sound
- APP: Quick access to the app: Custom button to launch input or apps quickly
- APP: Quick access buttons to appsMEDIA: Enter the media mode
Display the Quick setup menu
Media content control function buttons
: Custom button to launch input or apps quicklyBluetooth remote control module specificationsWNF171Frequency Range: 2.400GHz~2.4835GHzOutput Power(Max.): +4.5dBmNOTE: The included remote control will vary depending on model, countries/regions.Check information according to the actual remote control in the accessory bag.
Remote Control
- POWER: Switch the TV on or into standby mode
- INPUT: Select input sources
- Number button: Direct channel selection or numbers input
- GUIDE: Display the Electronic Program Guide (DTV mode)
- CH.List: Display the Channel List on the screen
- Special function buttons
- Display the Quick setup menu
- Media content control function buttons
- Λ /V/ < / >: Allow you to navigate the on-screen menus and adjust the system settings to your preference
- OK: Confirm the selection in the on-screen menus
- BACK: Return to the previous menu
- EXIT: Exit the menu
- HOME: Enter the Home screen
- VOL + /-: Adjust the volume
- CH Λ/V: Switch channel
- MUTE: Mute or restore the TV sound
- TXT: Turn on/off the Teletext function
- INFO: Display the present program information
- SUBTITLE: Activate or deactivate the subtitle mode
- APP: Quick access buttons to appsMEDIA: Enter the media mode All AppsBROWSER: Enter into BROWSER
All AppsBROWSER: Enter into BROWSER
NOTE: The included remote control will vary depending on model, countries/regions. Check information according to the actual remote control in the accessory bag.
Installing Batteries in the Remote Control
- Slide the back cover to open the battery compartment of the remote control.
- Insert two AAA size batteries. Make sure to match the (+) and ( – ) ends of the batteries with the (+) and ( – ) ends indicated in the battery compartment.
- Close the battery compartment with the cover.
NOTESProduct image is only for reference, actual product may vary in appearance.Handling the Batteries
- Incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.
- Only use the battery type indicated in this manual.
- Do not mix old and new batteries or different types of batteries.
- Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.
Pairing the Remote Control (only for Bluetooth remote control)Pair the remote to the TV after you power it on. Keep the remote control within 3 meters from the TV. Press any button (except the power and mic button) to pair.NOTES
- In special cases, press and hold [ ] button to pair.
- If an unknown error occurred with the remote, then it could have been caused by interference. Try to remove what’s causing the interference and pair it again.
- If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries, press any key for 1~2 seconds, and insertthem back. Then the remote control will work normally.
- The remote cannot be paired to the TV while the TV is in standby mode.
Remote Control Operation Range1. The remote control can work at a distance of up to 8 meters in front of the TV set.2. The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°.3. The operating distance may vary depending on the brightness of the room.
Disposal of this unitThe product should not be damaged, dismantled, or thrown in municipal waste.It should be packed and handed over to the authorized recycler.
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have completed all the connections.2. The first time you turn the TV on, it will go straight into the Installation Guide.3. Press the [ ∧/ V/ < / > ] buttons to navigate the menu and change the settings. Press the [OK] button to confirm.
| Select your Language | Select your desired language to be displayed on the menu.Press the menu button to set up your TV for store mode. |
| Connect to the Internet | If your TV does not automatically detect an Ethernet connection,then use a wireless network, select your network from the list thatdisplays, also you can add a hidden network. |
| Select your Country | Select the Country where you will operate the TV. |
| Terms & Conditions, Privacy Policy | Your use of this device is subject to the End User LicenseThe agreement, and lack of your acceptance of the End User LicenseThe agreement will turn off all smart features of this device. Please read the details carefully before you choose. |
| Enhanced Viewing | Enhanced viewing can automatically adjust the picture mode and sound mode so as to match with the current content displayed on this device, in case it is recognized by the automatic content recognition service. |
| Sign in to your VIDAA Account | Link your TV with a VIDAA account. |
| Name your TV | Give your TV a name. |
| Select your Voice Assistant | Select the voice assistant you want to use on the TV. |
NOTE: The Guide above is for referencing purposes and may differ depending on models/ countries/regions.•Features, appearance, and specifications are subject to change without notice.
| Item | 50″ | |
| Dimension(WxHxD) | Without Stand | 43.8 x 25.4 x 3.1 inches (1112 x 645 x 79 mm) |
| With Stand | 43.8 x 28.0 x 104 inches (1112 x 711 x 263 mm) | |
| Weight | Without Stand | 24.7 lbs (11.2 kg) |
| With Stand | 25.1 lbs (11.4 kg) | |
| Active Screen Size (Diagonal) | 126 cm | |
| Screen resolution | 3840 x 2160 | |
| Audio power | 10W + 10W | |
| Operating mode power density | 0.020 Watts/cm? | |
| Power consumption when turned off | < 0.5 W | |
| Power consumption in standby mode | 0.5 W | |
| Power consumption | Please refer to the rating label. | |
| Power supply | Please refer to the rating label. | |
| Receiving systems | Analog | PAL-D/K, B/G, I, SECAM-D/K, B/G |
| Digital | DVB-T/T2, DVB-C, DVB-S/S2 | |
| WirelessLAN Module specifications | Model | ZDGF7668AU-T |
| Frequency Range | 2.4-2.4835GHz 5.15-5.85GHz | |
| Output Power (Max.) | 2.4-2.4835GHz 17dBm5.15-5.25GHz 14dBm5.25-5.35GHz(DFS Band) 14dBm 5.49-5.716Hz(DFS/TPC Band) 14dBm 5.725-5.856Hz(for Non EU) 14dBm | |
| Bluetooth Module specifications | Model | ZDGF7668AU-T |
| Frequency Range | 2.4-248356Hz | |
| Output Power (Max.) | 2.4-2.4835GHz, Class1, 6dBm | |
| Environmental conditions | Temperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RHAtmospheric pressure: 86 kPa – 106 kPa |
Specifications
| HDMI Input | RGB / 60Hz (640×480, 800×600, 1024×768)
YUV / 60Hz (480i, 480p, 720p, 1080i, 1080p) YUV / 50Hz (576i, 576p, 720p, 1080i, 1080p) 3840×2160 / 24Hz, 3840×2160 / 25Hz, 3840×2160 / 30Hz, 3840×2160 / 50Hz, 3840×2160 / 60Hz |
EPREL Registration Information
| Model identifier | Eprel registration number |
| 50E76GQ | 406632 |
| 50E77GQ | 406635 |
| 50E78GQ | 406643 |
| 50E79GQ | 406644 |
| 50E76GQCH | 406645 |
| 50E77GQCH | 406646 |
| 50E79GQNE | 406647 |
| 50E76GQTUK | 406651 |
| 50E77GQTUK | 406653 |
Other Information
Recycling/LicensesWEEE (Waste Electronic Electric Equipment)European Directive 2012/19/EU
This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Batteries
In accordance with the Battery Directive, used batteries should not be disposed of in domestic waste. Dispose of your batteries in the collection containers specific for this purpose in retail stores.
ROHS (Restriction of Hazardous Substance) European Directive 2011/65/EU
This European directive limits the use of dangerous and hazardous substances which are difficult to recycle.This allows recycling easily the EEE and contributes to the safeguard of the environment.Substances included in this product match the RoHS directive.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logos are trademarks or registered trademarks of HDMILicensing Administrator, Inc. in the United States and other countries.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation.Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2020 Dolby Laboratories. Allrights reserved.
References
[xyz-ips snippet=”download-snippet”]