Hisense 32E5600F Android TV User Manual

Table of Contents

32E5600F Android TV

Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.

ES-A20480N-1

English Deutsch Español Italiano Português Français Nederlands

Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.English

Important Safety Instructions

Important Notice

Paragraphs beginning with the symbol conditions for the following settings.

indicate important instructions, tips or

For your own safety and the optimal performance of your TV, ensure to read the safety instructions before performing any installation.

Compatibility with 3rd party products, software and services are not guaranteed. We cannot be held liable for any damage or loss suffered whilst operating, using or connecting to incompatible devices or apps.The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. It is your responsibility to ensure that your use of this or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more information on the relevant laws and regulations involved or contact the owner of the rights of the content you wish to record or playback.

Read these instructions Follow all instructions Heed all warnings Keep these instructions All rights reserved.Safety InstructionsTo ensure safe and correct use of this product, always comply with the following precautions to avoid dangerous situations and damage to your unit:The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage.Class II product : This symbol indicates that it does not require a safety connection of protective earthing (ground).

Important Safety InstructionsThe intended use and ambient conditions for this TVThis TV is intended for the rendering of video and audio signals, on a table-top or wallmounted, in a home or office environment. It must not be used in rooms with a high level of humidity or dust concentration. The warranty is only valid if used as intended by the manufacturer.WARNINGHigh humidity and dust concentration may lead to current leaks in the device. To reduce the risk of fire or electrical shock: – Do not expose this unit to rain, moisture, dripping or splashing water, and donot place objects filled with liquids, such as vases, cups, etc. on or over the unit. – Do not touch the TV with wet hands. – Do not expose to direct air-conditioning and keep candles or other naked flames away from the TV at all times. If the TV is moved from a cold environment to a hot environment, leave it switched off for at least an hour to avoid condensation. If used outside, make sure it is protected from moisture. If you notice anything unusual, immediately remove the power plug. In case of fire, use preferably a CO2 gas or powder fire extinguisher. If such extinguishers are not accessible, try to isolate the electrical supply before using a water fire extinguisher.WARNING Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, canbe avoided by taking simple precautions such as: – Using cabinets or stands recommended by the manufacturer of the televisionset. – Only using furniture that can safely support the television set. – Ensuring the television set is not overhanging the edge of the supportingfurniture. – Not placing the television set on tall furniture (for example, cupboards orbookcases) without anchoring both the furniture and television set to a suitable support. – Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. – Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.B

Important Safety Instructions

Moving/Transportation

Power plug and power cable

Before moving this TV, disconnect all cables and move in the vertical position only. Grasp the device on the upper and lower edges of the frame.– Do not press or put stress on the front panel of the TV. It may take two or more people to carry larger TVs.If you have to briefly lay down the TV, place the unit with its entire front surface lying flat on soft material.The LED screen is made of glass and can break if is not handled properly. Always wear rubber gloves to carry the unit. If the LED screen is damaged, liquid crystal might leak out. In case of skin contact, immediately rinse thoroughly with water.Power SupplyIncorrect voltages can damage the TV. Only connect this unit to a power supply with the correct voltage and frequency noted on the type plate, using the supplied power cable.The power plug must be easily accessible so that the device can be disconnected at all time. The unit is live, even if in standby mode, as long as the unit is connected to a power outlet.It is recommended that this unit is placed on a dedicated circuit.– Do not overload the power outlets by connect too many appliances to the same outlet. Overloaded wall outlets, extension cords, etc. are dangerous and can result in electric shock and fire.After power off, don’t turn it on again in 5 seconds. Frequent switching power supply in a short period of time can cause abnormal TV.

– Do not touch the power plug with wet hands.– Do not place heavy objects on the power cable. Route the cable so that it is not kinked or laid over sharp edges, walked on or exposed to chemicals. A power cable with damaged insulation can cause electric shock and fire.– Pull the power plug, NOT on the cable when disconnecting. The cable can become damaged and cause a short circuit if pulled on.– Do not place the power cable near a high temperature object.– Do not move the TV with the power cable plugged into a socket.– Do not use a damaged or loose power cable, or a damaged socket outlet.– Do not use any power cords other than the one supplied with this unit.Set-upCheck that the location is suitable to bear the load of the TV. Place on a level, sturdy and horizontal base. Ensure that the unit does not hang over the edge of the base when placed in or on furniture. If placed on a cart, use caution when moving to avoid the unit from tipping over.– Place the unit in a normal upright horizontal position. It must never be operated vertically, lying flat or hanging overhead from the ceiling.– Place the unit where it is not exposed to direct sunlight or other sources of heat.When mounting the TV on a wall, follow the instructions supplied with the wallmount, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

Important Safety Instructions

Air ventilation and high temperaturesInstall your TV only where there is proper ventilation, and ensure that there is at least 10 cm free space on the sides and 20 cm above the unit for air circulation. Excessive heat and obstruction of ventilation could lead to fire or early failure of some electric components.

Prevent small items from getting into the interior of the device through the ventilation slots. Such objects may cause short circuits, which may cause fire. If something should get inside the unit, immediately unplug the power plug of the device and contact service support.The LED screen

– Do not block any ventilation openings with newspapers, tablecloths, curtains, etc.– Do not dry clothing etc. on top of the unit. – Take care not to touch the ventilationopenings since they may become hot. – Do not insert foreign objects into the TVthrough the vents.The Stand– Do not use any stand other than the one supplied with this unit.– Do not modify or use the stand if it becomes warped of physically damaged.– During setup, make sure that all the screws are securely tightened.– Ensure that the TV does not suffer any impact during the attachment of the stand.– Ensure that children do not climb onto the stand.– Attach or remove the stand with at least two people.

20cm

10cm

Despite thorough care when manufacturing this display, it cannot be 100% guaranteed that no sub-pixel defects will occur due to technical reasons. These cannot be considered as a device defect in terms of the guarantee. They will not affect the performance and reliability of the TV.To prevent “image burn”, avoid displaying still images for long periods of time, there is a possibility that a copy of the image may remain. If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the black areas. Image burn is not covered by the warranty.– Do not apply strong force or impact on the display panel.Avoid touching the LED screen or touching it for long periods of time. Doing so may produce some temporary distortion effects on the screen.Radio waves– Do not use the TV in any medical institutions or locations with medical equipment. Radio waves may interfere with medical equipment and cause malfunction.

– Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with automatic control equipment and cause malfunction.

Important Safety Instructions

If you have a cardiac pacemaker, keep a distance of at least 22 cm from the TV. Radio waves may interfere with the operation of a pacemaker.Built-in wireless LAN– Do not connect to wireless networks that you do not have the usage rights for. Data transmitted and received over radio waves may be intercepted and monitored.The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency band. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from devices such as other wireless LAN devices, microwaves, mobile phones, and other devices that use 2.4 GHz and 5 GHz signal.

Supervision– Do not let children play unsupervised close to the TV. It could tip over, be pushed off or pulled down from the stand surface and injure someone.– Do not allow a switched-on TV to run unattended.VolumeLoud music and noises can lead to irreversible damage to your ears. Avoid extreme volume, especially over long periods and when using headphones. If you hear a drumming noise in your ears, turn down the volume or temporarily stop using headphones.Thunder Storms

Warning about off-gassingNew furniture, carpet, paint, building materials and electronics can release chemicals into the air through evaporation. After you set your TV up and turn it on for the first time, you may notice a slight smell within a couple of hours. This is because some components of TV are heating up for the first time. The materials that we use fully meet the environmental requirements and regulations. Your TV is working just fine and the fumes from the off-gassing will diminish eventually.

Pull out the power plug and all connected antenna cables from the TV during a thunderstorm. Overvoltage caused by lightning strikes can damage the TV via the antenna system, as well as the wall socket.Long periods of absenceAs long as the power plug is connected to a live socket outlet, the TV will consume power even in standby mode. The power plug and all connected antenna cables should be disconnected out during long periods of absence.

Important Safety Instructions

Cleaning and care

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

CAUTION:

hospital.

Unplug the power cord prior to cleaning the TV.

Modification

Clean the TV, the screen, and the remote control with a soft, moist, clean and color-natural cloth only. Do not use any chemicals.– Do not subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade the surface quality.– Do not spray water or other liquids directly on the TV. Liquid inside the TV could lead to product failure.

Do not attempt to modify this product in any way. Unauthorized modification could void the warranty of this unit, cause electric shock and fires.Remote Control batteries– Incorrect installation may cause battery leakage, corrosion and explosion.– Replace only with the same or equivalent type.

– The surface of the display panel is treated and may be easily damaged. Take care not to scratch it with fingernails or other hard objects.– Also wipe the power plug with a dry cloth at regular intervals.

– Do not mix old and new batteries. – Do not mix different battery types. – Do no use rechargeable batteries. – Do not burn or break up batteries. – Be sure to dispose of batteriescorrectly.

Service/RepairNever remove the cover/back of the TV; there are no user serviceable parts inside. Refer all service to qualified service personnel.Packaging

– Do not expose batteries to excessive heat such as sunshine, fire or the like.Outdoor Antenna GroundingIf an outdoor antenna used, be sure the antenna system is protected against voltage surges and built-up static charges.

Keep the anti-moisture materials and plastic bags out of reach of children.Plastic bags can cause suffocation and the anti-moisture material is harmful if

DisposalRefer to the recycling section of this manual.

Contents

Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade.Contents

Accessories List………………………………………………………………………………………………..1 Installing the Stand or Wall mount bracket ……………………………………………………………2 TV Front…………………………………………………………………………………………………………..5 TV Rear …………………………………………………………………………………………………………..6 Making Connections ………………………………………………………………………………………….8 Remote Control ………………………………………………………………………………………………11 Turning the TV on for the First Time …………………………………………………………………..16 Specifications …………………………………………………………………………………………………17 Other Information…………………………………………………………………………………………….21 Accessories List

The following accessories are included with TV:

User Manual × 1

Screw × 4

Base Stand × 1(50″/55″/65″)

Base Stand × 2(75″)

Remote Control × 1

Power Cord × 1

AAA Battery × 2

Warranty Card × 1

RCA Jack to AV Cable × 1

NOTEThe accessories may be different from the list above due to different models, countries / regions. Please refer to the actual accessory bag.

SIMPLIFIED EU DECLARATION OF CONFORMITYHereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ERF3A80 / ERF3B80H / ERF3C80H / ERF3D80H / ERF3E80H / ERF3H80H / ERF3I80H /50A7GQ / 50A70GQ / 50A71GQ / 50A72GQ / 50A71GQCH / 50A72GQCH / 50A78GQNE / 50A76GQ / 50A77GQ / 50A78GQ / 50A79GQ / 50A78GQCH / 50A79GQCH / 50A79GQNE / 50A7GQTUK / 50A70GQTUK / 50A71GQTUK / 50A72GQTUK / 50A76GQTUK / 50A77GQTUK / 55A7GQ / 55A70GQ / 55A71GQ / 55A72GQ / 55A71GQCH / 55A72GQCH / 55A78GQNE / 55A76GQ / 55A77GQ / 55A78GQ / 55A79GQ / 55A78GQCH / 55A79GQCH / 55A79GQNE / 55A7GQTUK / 55A70GQTUK / 55A71GQTUK / 55A72GQTUK / 55A76GQTUK / 55A77GQTUK / 65A7GQ / 65A70GQ / 65A71GQ / 65A72GQ / 65A71GQCH / 65A72GQCH / 65A78GQNE / 65A76GQ / 65A77GQ / 65A78GQ / 65A79GQ / 65A78GQCH / 65A79GQCH / 65A79GQNE / 65A7GQTUK / 65A70GQTUK / 65A71GQTUK / 65A72GQTUK / 65A76GQTUK / 65A77GQTUK / 75A7GQ / 75A70GQ / 75A71GQ / 75A72GQ / 75A71GQCH / 75A72GQCH / 75A78GQNE / 75A76GQ / 75A77GQ / 75A78GQ / 75A79GQ / 75A78GQCH / 75A79GQCH / 75A79GQNE / 75A7GQTUK / 75A70GQTUK / 75A71GQTUK / 75A72GQTUK / 75A76GQTUK / 75A77GQTUK] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://global.hisense.com/downloads.

Installing the Stand or Wall mount bracketCAUTION Be sure to disconnect the AC power cord before installing a stand or wall mount brackets. The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. After the installation is completed, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.Installing the stand Follow the illustrations and textual instructions below to complete the installation steps:For 50″/55″/65″ 1. Carefully place your TV face-down on a soft, flat surface to prevent damage to theTV or scratching to the screen. 2. Take out the stand from the accessory bag and then insert the stand into thebottom slots of the TV. 3. Secure the stand to the TV with the 4 screws in accessory tightly.

Base Stand

Screws: M5×12(50″/55″) M5×16(65″)

Installing the Stand or Wall mount bracketFor 75″ 1. Carefully place your TV face-down on a soft, flat surface to prevent damage to theTV or scratching to the screen. 2. Take out the 2 stands from the accessory bag and then insert the stands into thebottom slots of the TV. 3. Secure the stands to the TV with the 4 screws in accessory tightly.Attention: According to the size of the TV supporting surface, you can select one of the base stand installation patterns, as shown in the figure.

Base Stand

Screws M5×12(75″)

Base Stand

Screws M5×12(75″)

Base Stand

Screws M5×12(75″)

Base StandScrews M5×12(75″)

Installing the Stand or Wall mount bracket

Installing the wall mount bracket

Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV.

CAUTION

When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury.

Place spacers between the TV and bracket.

15°

Make sure the tilt angle between the TV screen and the

vertical surface is no more than 15 degrees. Standard dimensions are shown below.

TV screen

Vertical surface

Wall mount hole pattern (mm) Wall mount screw size

300 × 200(50″/55″) 400 × 200(65″) 400 × 300(75″) M6

9.5 -11.5 mm(50″/55″/65″) 8.0 -10.0 mm(75″) Wall Mount Bracket

Rear cover of the TV

Wall Mount Screw Wall Mount Spacer

NOTES

The diameter and length of the screws differ depending on the wall mount bracket model.Wall mount bracket is optional. Your TV may not have wall mount bracket. Please refer to the actual accessories.

TV Front

Remote sensor/Power indicator/Single button (Standby/Source)

Item

Description

Remote sensor

Receive remote signals from the remote control. Do not put anything near the sensor, as its function may be affected.

Power indicator The light is red in standby mode.

Press the single button when in standby mode, and the TV will be turned on.

Standby / Source

Press the single button to call up the menu. When the focus is on “Power Off”, wait for 3 seconds, and then the TV will go into standby mode automatically.Press the single button to call up the menu, and then select among the different input signal sources.

NOTESThe Picture is Only for Reference.Powering on the TV requires several seconds to load programmes. Do not rapidly turn the TV off as it may cause the TV work abnormally.

TV Rear For 50″/55″/65″

TV Rear

USB 1 DC 5V 1A(MAX)

COMMON INTERFACE CARD FACE FRONTHDMI 1() AV IN SERVICE

HDMI 2(eARC)

HDMI 3

ANT 1 DVB-T/T2/C

ANT 2 DVB-S/S2 13/18V 0.5A

AC INPUT

LAN

DIGITAL AUDIO OUT

NOTESANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A max.) Check the jacks for position and type before making any connections. Loose connections can result in image or colour problems. Make sure that all connections are tight and secure. Not all A/V devices have the ability to connect to a TV. Please refer to the user’s manual of your A/V device for compatibility and connections procedure. Before connecting external equipment, remove the mains plug from the wall socket. Otherwise, it may cause electric shock. Service jack is not available for you to connect an external device. It can only be used by our factory for testing purposes.6

USB 2 DC 5V 0.5A(MAX)

For 75″

TV Rear

USB 1 DC 5V 1A(MAX)

COMMON INTERFACE CARD FACE FRONTHDMI 1() AV IN SERVICE

HDMI 2(eARC)

HDMI 3

ANT 1 DVB-T/T2/C

ANT 2 DVB-S/S2 13/18V 0.5A

AC INPUT

LAN

DIGITAL AUDIO OUT

USB 2 DC 5V 0.5A(MAX)

Making Connections

LAN (Wired setup)

Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.· It is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have DHCP.

TV JACK

IP Sharer (Router) (with DHCP server)

External Modem (ADSL / VDSL / Cable TV)

LAN Cable

Modem Cable

Wireless setupTo connect your TV to your network wirelessly, you need a wireless router or modem. See the illustration below. · The built-in Wireless LAN Adapter supports the IEEE 802.11a/b/g/n/accommunication protocols. It is recommended to use IEEE 802.11n router. Low transfer rates for b/g may have the influence on the quality of streamed videos and other media.Wireless router with DHCP

Wireless LAN Adapter built-in TV set

LAN Cable

NOTESYou must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapters.If the wireless router supports DHCP, your TV can connect more easily to the wireless network.If you apply a security system other than the systems listed below, it will not work with the TV. Security system: WPA, WEP, WPA2.In order to guarantee smooth network, the distance between router and TV should be less than 10 metres.

ANT

Making Connections

ANT 1 DVB-T/T2/C

Outdoor Antenna

Cable

ANT OUT

Antenna Cable (75)

(not included)

VHF/UHF Antenna

ANT 2 DVB-S/S2 13/18V 0.5A

(not included)

Satellite antenna

DIGITAL AUDIO OUT

HDMI (eARC) HDMIHDMI

HDMI (eARC) HDMI

AV INAV IN

Audio Amplifier/Speaker DIGITAL AUDIO cable (not included)

HDMI cable (not included) HDMI cable (not included)

Audio Amplifier/SpeakerHDMIDVD/Blu-Ray/AV receiver/ Set-top BoxHDMI

Red(R) White(L) Yellow(Video)

VCR/DVD Player/ Recorder/Set-top box/Satellite Receiver/ Video Camera

A/V OUT

Video L

(Cables are not included)

HEADPHONE

Headphone (not included)NOTE Excessive sound pressure from earphones and headphones can cause hearing loss.

Making Connections

2CAM CARD

1SMART CARD

COMMON INTERFACE

NOTES Before you insert/remove the CI+ module, ensure that the TV is switched off. Then insert the CI card into the CI+ module in accordance with the Service Provider’s instructions.Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction.You must obtain a CI+ module and card from the service provider of the channels you want to watch.Insert the CI+ module with the SmartCard in the direction marked on the module and SmartCard.CI+ is not supported in some countries and regions; check with your authorized dealer.

USB 1 DC 5V 1A(MAX)

USB 2 DC 5V 0.5A(MAX)

NOTES

When connecting a hard disk or a USB hub, always connect

the mains adapter of the connected device to the power

USB

supply. Exceeding a total current consumption may result in

damage. The USB 1.1 and USB 2.0 devices maximum current

consumption are 500mA. The USB 3.0 device maximum

current consumption is 1A.

For individual non-standard high-capacity mobile hard disk, if its impulse current is greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV does not support it.

The USB port supports a voltage of 5V.

Remote Control

1 INPUT: Select input sources

2 2 POWER: Switch the TV on or into standby mode

3 Number button: Direct channel selection or numbers input

4 GUIDE: Display the Electronic Program Guide (DTV

mode)

5 CH.LIST: Display the Channel List on the screen

6 Special function buttons

5 7 : Display the Quick setup menu

8 : Media content control function buttons

9 / / < / >: Allow you to navigate the on-screen

menus and adjust the system settings to your

preference

10 OK: Confirm the selection in the on-screen menus

10 11 BACK: Return to previous menu

12 12 EXIT: Exit the menu

13 13 HOME: Enter the Home screen

15 14 VOL + /-: Adjust the volume

15 CH / : Switch channel

16 16 MIC: Activate the microphone

18 17 SUBTITLE: Activate or deactivate the subtitle

mode

18 INFO: Display the present programme information

TEXT: Turn on/off the teletext function

19 MUTE: Mute or restore the TV sound2120 APP: Quick access to the app : Custom button to launch input or apps quickly21 APP: Quick access buttons to apps MEDIA: Enter the media mode

Bluetooth remote control module specifications WNF171 Frequency Range: 2.400GHz~2.4835GHz Output Power(Max.): +4.5dBmNOTE: The included remote control will vary depending on model, countries/regions. Check information according to the actual remote control in the accessory bag.11

Remote Control

1 POWER: Switch the TV on or into standby mode

2 2 INPUT: Select input sources

3 Number button: Direct channel selection or numbers input

4 GUIDE: Display the Electronic Program Guide (DTV

mode)

5 CH.List: Display the Channel List on the screen

5 6 Special function buttons

7 : Display the Quick setup menu 6

8 : Media content control function buttons

8 9 / / < / >: Allow you to navigate the on-screen

menus and adjust the system settings to your

preference

10 OK: Confirm the selection in the on-screen menus

10 11 BACK: Return to previous menu

12 EXIT: Exit the menu

13 13 HOME: Enter the Home screen

14 VOL + /-: Adjust the volume

15 15 CH / : Switch channel

16 MUTE: Mute or restore the TV sound

17 TXT: Turn on/off the teletext function 18

18 INFO: Display the present programme information

19 SUBTITLE: Activate or deactivate the subtitle mode

20 APP: Quick access buttons to apps

MEDIA: Enter the media mode

/ : All Apps

BROWSER: Enter into BROWSER

NOTE: The included remote control will vary depending on model, countries/regions. Check information according to the actual remote control in the accessory bag.12

Remote Control

1 POWER: Switch the TV on or into standby mode

2 TXT: Turn on/off the teletext function

3 INPUT: Select input sources

4 Number button: Direct channel selection or numbers input

5 GUIDE: Display the Electronic Program Guide (DTV

mode)

6 CH.List: Display the Channel List on the screen

7 Special function buttons

8 : Display the Quick setup menu

9 : Media content control function buttons

10 / / < / >: Allow you to navigate the on-screen

menus and adjust the system settings to your

preference

11 OK: Confirm the selection in the on-screen menus

12 BACK: Return to previous menu

13 EXIT: Exit the menu

14 HOME: Enter the Home screen

15 VOL + /-: Adjust the volume

16 16 CH / : Switch channel

17 MUTE: Mute or restore the TV sound

18 APP: Quick access buttons to apps

19 : All Apps

EN6A64HNOTE: The included remote control will vary depending on model, countries/regions. Check information according to the actual remote control in the accessory bag.13

Remote ControlInstalling Batteries in the Remote Control NOTE: Check information according to the actual remote control in the accessory bag.1. Slide the back cover to open the battery compartment of the remote control.2. Insert two AAA size batteries. Make sure to match the (+) and ( – ) ends of the batteries with the (+) and ( – ) ends indicated in the battery compartment.3. Close the battery compartment with the cover.1. Press the switch and the battery case will pop up automatically.2. Insert two AAA size batteries. Make sure to match the (+) and ( – ) ends of the batteries with the (+) and ( – ) ends indicated in the battery compartment.3. Push the battery case back to the remote control.NOTES Product image is only for reference, actual product may vary in appearance. Handling the Batteries Incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property. Only use the battery type indicated in this manual. Do not mix old and new batteries or different types of batteries. Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.14

Remote ControlPairing the Remote Control (only for Bluetooth remote control) Pair the remote to the TV after you power it on. Keep the remote control within 3 metres from the TV. Press any button (except power and mic button) to pair.NOTES In special cases, press and hold [ ] button to pair. If an unknown error occurred with the remote, then it could have been caused by interference. Try to remove what’s causing the interference and pair it again. If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries, press any key for 1~2 seconds, and insert them back. Then the remote control will work normally. The remote cannot be paired to the TV while the TV is in standby mode.Remote Control Operation Range 1. The remote control can work at a distance of upto 8 metres in front of the TV set. 2. The remote control angle: taking the remotesensor as an apex, 6 metres away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°. 3. The operating distance may vary depending on the brightness of the room.Disposal of this unit Product should not be damaged, dismantled or thrown in municipal waste. It should be packed and handed over to authorised re-cycler.15

Turning the TV on for the First Time

1. Connect the mains cable to the mains socket after you have completed all the connections.2. The first time you turn the TV on, it will go straight into the Installation Guide.3. Press the [ / / < / >] buttons to navigate the menu and change the settings. Press the [OK] button to confirm.

Select your LanguageConnect to the InternetSelect your CountryTerms & Conditions, Privacy PolicyEnhanced ViewingSign in your VIDAA Account

Select your desired language to be displayed on the menu. Press menu button to set up your TV for store mode.If your TV does not automatically detect an Ethernet connection, then use a wireless network, select your network from the list that displays, also you can add a hidden network.Select the Country where you will operate the TV.Your use of this device is subject to the End User License Agreement, and lack of your acceptance of the End User License Agreement will turn off all smart features of this device. Please read the details carefully before you choose. Enhanced viewing can automatically adjust the picture mode and sound mode so as to match with the current content displayed on this device in case it is recognized by the automatic content recognition service.Link your TV with VIDAA account.

Name Your TV Give your TV a name.

Select your Voice Assistant

Select your voice assistant you want to use on the TV.

NOTE: The Guide above is for referencing purpose and may differ depending on models/ countries/regions.

SpecificationsFeatures, appearance and specifications are subject to change without notice.

Item

50″

55″

Dimension (W × H × D)

Without Stand With Stand

44.0 × 25.5 × 3.0 inches (1117 × 647 × 77 mm)44.0 × 27.8 × 9.9 inches (1117 × 705 × 251 mm)

48.4 × 28.0 × 3.0 inches (1230 × 710 × 77 mm) 48.4 × 30.2 × 9.8 inches (1230 × 768 × 250 mm)

Weight

Without Stand 24.7 lbs (11.2 kg)

With Stand

26.0 lbs (11.8 kg)

27.1 lbs (12.3 kg) 28.7 lbs (13.0 kg)

Active Screen Size (Diagonal) 126 cm

139 cm

Screen resolution

3840 × 2160

Audio power

10W + 10W

Operating mode power density 0.020 Watts/cm²

0.020 Watts/cm²

Power consumption when turned off < 0.5 W

< 0.5 W

Power consumption in standby mode 0.5 W

0.5 W

Power consumption

Please refer to the rating label.

Power supply

Receiving systems

Analog Digital

Model

Please refer to the rating label. PAL-D/K, B/G, I, SECAM-D/K, B/G DVB-T/T2, DVB-C, DVB-S/S2 ZDGF7668AU-T

Frequency RangeWireless LAN Module specificationsOutput Power (Max.)

2.4-2.4835GHz 5.15-5.85GHz2.4-2.4835GHz 16dBm 5.15-5.25GHz 14dBm 5.25-5.35GHz(DFS Band) 14dBm 5.49-5.71GHz(DFS/TPC Band) 14dBm 5.725-5.85GHz(for Non EU) 14dBm

Model

ZDGF7668AU-T

Bluetooth

Frequency

Module

Range

specifications Output Power

(Max.)

Environmental conditions

2.4-2.4835GHz2.4-2.4835GHz, Class1, 6dBmTemperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RH Atmospheric pressure: 86 kPa – 106 kPa

HDMI Input

SpecificationsRGB / 60Hz (640×480, 800×600, 1024×768) YUV / 60Hz (480i, 480p, 720p, 1080i, 1080p) YUV / 50Hz (576i, 576p, 720p, 1080i, 1080p) 3840×2160 / 24Hz, 3840×2160 / 25Hz 3840×2160 / 30Hz, 3840×2160 / 50Hz, 3840×2160 / 60Hz

Specifications

Item

Dimension (W × H × D)

Without Stand With Stand

Weight

Without Stand With Stand

Active Screen Size (Diagonal)

65″

75″

57.0 × 32.9 × 3.1 inches 65.9 × 37.8 × 3.1 inches (1449 × 835 × 78 mm) (1675 × 960 × 78 mm)

57.0 × 35.6 × 11.6 inches 65.9 × 41.2 × 14.4 inches (1449 × 903 × 294 mm) (1675 × 1046 × 366 mm)

40.8 lbs (18.5 kg)

61.5 lbs (27.9 kg)

42.1 lbs (19.1 kg)

62.8 lbs (28.5 kg)

164 cm

189 cm

Screen resolution

3840 × 2160

Audio power

10W + 10W

Operating mode power density 0.020 Watts/cm²

Power consumption when turned off < 0.5 W

Power consumption in standby mode 0.5 W

3840 × 2160 15W + 15W 0.017 Watts/cm² < 0.5 W 0.5 W

Power consumption

Power supply

Receiving systems

Analog Digital

Model

Please refer to the rating label. Please refer to the rating label. PAL-D/K, B/G, I, SECAM-D/K, B/G DVB-T/T2, DVB-C, DVB-S/S2 ZDGF7668AU-T

Frequency RangeWireless LAN Module specificationsOutput Power (Max.)

2.4-2.4835GHz 5.15-5.85GHz2.4-2.4835GHz 16dBm 5.15-5.25GHz 14dBm 5.25-5.35GHz(DFS Band) 14dBm 5.49-5.71GHz(DFS/TPC Band) 14dBm 5.725-5.85GHz(for Non EU) 14dBm

Model

ZDGF7668AU-T

Bluetooth

Frequency

Module

Range

specifications Output Power

(Max.)

Environmental conditions

2.4-2.4835GHz2.4-2.4835GHz, Class1, 6dBmTemperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RH Atmospheric pressure: 86 kPa – 106 kPa

HDMI Input

Other Information

Recycling/LicensesWEEE (Waste Electronic Electric Equipment) European Directive 2012/19/EUThis symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Batteries

In accordance with the Battery Directive, used batteries should not be disposed of in the domestic waste. Dispose your batteries in the collection containers specific for this purpose in retail stores.

ROHS (Restriction of Hazardous Substance) European Directive 2011/65/EUThis European directive limits the use of dangerous and hazardous substances which are difficult to recycle. This allows recycling easily the EEE and contributes to the safeguard of the environment. Substances included in this product match to the RoHS directive.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2020 Dolby Laboratories. All rights reserved.

Other Information

EPREL Registration Information

Model identifier Eprel

registration

number

50A7GQ 50A70GQ 50A71GQ 50A72GQ 50A71GQCH 50A72GQCH 50A78GQNE 50A76GQ 50A77GQ 50A78GQ 50A79GQ 50A78GQCH 50A79GQCH 50A79GQNE 50A7GQTUK 50A70GQTUK 50A71GQTUK 50A72GQTUK 50A76GQTUK 50A77GQTUK 55A7GQ 55A70GQ 55A71GQ 55A72GQ 55A71GQCH 55A72GQCH 55A78GQNE

428905 428906 428907 428908 428909 428910 428911 428912 428913 428914 428915 428916 428917 428918 428919 428920 428921 428922 428923 428924 428925 428926 428927 428928 428929 428930 428931

55A76GQ 55A77GQ 55A78GQ 55A79GQ 55A78GQCH 55A79GQCH 55A79GQNE 55A7GQTUK 55A70GQTUK 55A71GQTUK 55A72GQTUK 55A76GQTUK 55A77GQTUK 65A7GQ 65A70GQ 65A71GQ 65A72GQ 65A71GQCH 65A72GQCH 65A78GQNE 65A76GQ 65A77GQ 65A78GQ 65A79GQ 65A78GQCH 65A79GQCH 65A79GQNE

428932 428933 428934 428935 428936 428937 428938 428939 428940 428941 428942 428943 428944 413407 414134 414135 414136 414137 414138 414139 414140 414141 414142 414143 414144 414145 414147

65A7GQTUK 65A70GQTUK 65A71GQTUK 65A72GQTUK 65A76GQTUK 65A77GQTUK 75A7GQ 75A70GQ 75A71GQ 75A72GQ 75A71GQCH 75A72GQCH 75A78GQNE 75A76GQ 75A77GQ 75A78GQ 75A79GQ 75A78GQCH 75A79GQCH 75A79GQNE 75A7GQTUK 75A70GQTUK 75A71GQTUK 75A72GQTUK 75A76GQTUK 75A77GQTUK

414148 414150 414151 414153 414154 414155 428945 428946 428947 428948 428949 428950 428951 428952 428953 428954 428955 428956 428957 428958 428959 428960 428961 428962 428963 428964

References

Product Support – Hisense Global

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-22

Hisense

admin

Tags:

_pdf, 32E5600F, Android TV, Hisense