Hisense 75U80G 8K ULED Android TV User Guide

QUICK SETUP GUIDEBefore using the TV, please read this guide thoroughly and retain it for future reference. For more detailedinstructions, please see the User Manual or the E-manual.

ES-G

Declaration

HISENSE LIMITED PTY WARRANTY AND DISCLAIMER

ACCEPTANCE OF TERMS: Televisions

By using this Television, you agree to the terms and conditions outlined in the Warranty and. where applicable, the Disclaimer. If you do not agree to the terms and conditions you have the option to return the Television to the relevant retailer within 7 days of the original purchased date and obtain a refund, provided the Television has not been used or damaged.

HISENSE DISCLAIMER

THIRD-PARTY CONTENT AND SERVICES: Televisions

What does this Disclaimer apply to?

  1. This Disclaimer applies in relation to any television (together with any remote and other accessories supplied with it) (Television) supplied by Hisense Australia Pty Ltd (Hisense) or an Authorised Retailer, and if you can access any third party software application, content and/or services (Third Party Content and Services) through the
  2. This Disclaimer does not limit your rights under the Australian Consumer Laws (for Australian customers) or the Consumer Guarantees Act 1993 (for New Zealand customers).

The basis on which Third Party Content and Services are provided

  1. Third-Party Content and Services are accessed and used at your own risk, regardless of who installed the Third Party Content and Services on the Television. To the maximum extent permitted by law, Hisense makes no warranty. guarantee, representation or undertaking in relation to any Third Party Content and Services.
  2. You must comply with any terms and conditions relating to the Third Party Content and Services.
  3. Hisense can restrict your access or use of certain Third Party Content and Services
  4. Hisense is not liable or responsible for your use of the Third Party Content and Services, including for any:a. charges relating to your use of the Third Party Content and Services:b. claims, liabilities, loss, and damage arising out of (or in connection with) any of the Third Party Content and Services;c, breach of the law or the rights of any other person or entity arising from the use of any Third Party Content and Services: or customer service or support in relation to any Third Party Content and Services.
  5. You acknowledge and agree that:a. the performance of the Third Party Content and Services will depend on variables beyond the control of Hisense.b. certain Third Party Content and Services may require internet access, express consent regarding the collection and use or personal information, other accessories which are sold separately, and/or other requirements:c. the Third Party Content and Services (including their intellectual property rights) will remain the property of the relevant provider of the Third Party Content and Services (Third Party Provider).
  6. Your other obligations: You must:a. ensure that your use of the Third Party Content and Services complies with all applicable items, and the intellectual property and other rights of the Third Party Provider,b. not modify, duplicate. publish, upload, distribute, translate, adapt, market, or use any part of the Third Party Content and Services, without the prior written consent of the relevant Third Party Provider unless expressly Permitted by this Disclaimer, the Warranty, or any other applicable terms and conditions:c, adhere to any additional terms where a Third Party Content or Service requires internet access; andd. pay any additional charges relating to the use of a Third Party Content and Service.

Important Safety Precautions

This symbol alerts the user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution.

This symbol alerts the user about the presence of important operating instructions and maintenance in the document enclosed in the package.

ATTENTIONRISK OF SHOCK ELECTRICDo not open the back cover.In no case, the user is allowed to operate inside the TV set. Only a qualified technician is entitled to operate.

AC voltage: This symbol indicates that the rated voltage marked with the symbol is AC voltage.Important Safety Precautions

Class I product: This symbol indicates that it requires a safety connection of protective earthing (ground).

Disposal of Used Electrical & Electronic Equipment

Packaging and electrical goods should be recycled appropriately, and not treated as household waste. Please dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipment waste. By ensuring the correct disposal of this product, you will help prevent potentially hazardous to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not, therefore, dispose of your old electrical and electronic equipment with your household waste. For more detailed information about the recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Warning

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

  • Using stands recommended by the manufacturer of the television set.
  • Only using furniture that can safely support the television set.
  • Ensuring the television set is not overhanging the edge of the supporting furniture.
  • Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable
  • Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
  • Educating children about the dangers of climbing on furniture to reach the television set or its controls.

Safeguards

Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television.

  1. A note about safety and operating instructionsRead and follow all safety and operating instructions, and retain them safely for future reference.
  1. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions.
  2. CleaningUnplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
  1. Wall Mount BracketThe wall mount bracket is only available for some models. If the wall mount bracket is not supplied with this product, you can buy it at the local market.Please refer to the Installing the Wall Mount Bracket page of Quick Setup Guide for dimensions.
  1. Water and MoistureAvoid dripping or splashing of liquids onto the product. Objects filled with liquids, such as vases, should not be placed on the product.
  1. SettingDo not place this TV on an unstable cart, stand, or table. Placing the TV on an unstable base can cause the TV to fall, resulting in serious personal injuries as well as damage to the TV. Use only a cart, stand, bracket, or table recommended by the manufacturer or salesperson.
  1. VentilationSlots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the TV and to protect it from overheating. Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as a built-in cabinet unless proper ventilation is provided. Leave a minimum 10cm gap all around the unit, the rear of the TV should be 6cm away from the wall.
  1. Power SourceThis TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company.
  1. Power-Cord ProtectionPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug, wall outlets, and the point where they exit from the TV. The MAIN plug is used as the disconnect device, the disconnect device shall remain readily operable
  1. LightningFor added protection for this TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning or a power-line surge.
  1. Power LinesAn outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. Where installing an outside antenna system, extreme care should be taken to Keep from touching such power lines or circuits as contact With them might be fatal.
  1. OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
  1. Object and Liquid EntryNever push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
  1. Outdoor Antenna GroundingIf an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
  1. ServicingDo not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
  1. Damage Requiring ServiceUnplug the TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
  • When the power supply cord or plug is damaged.
  • If liquid has been spilled, or objects have fallen into the TV.
  • If the TV has been exposed to rain or water.
  • If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation.
  • If the TV has been dropped or the cabinet has been damaged.
  • When the TV exhibits a distinct change in performance – this indicates a need for
  1. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

  1. Safety CheckUpon completion of any service or repair to the TV, ask the service technician to perform safety checks to determine that the TV is in safe operating condition.
  1. HeatThe product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
  1. Fire The product should be situated away from naked flame sources such as a lighted candle.
  2. Off-gassing The TV smells of plastic is normal and will dissipate over time.

Do not mix and use new batteries with old batteries, or batteries of different types. Do not expose batteries to heat such as direct sunlight or fire. Make sure the batteries’ positive and negative ends are facing the correct direction.

The device should not be exposed to dripping and spraying and it cannot be placed under objects filled with liquids.

To fully disconnect the TV, remove the power plug from the wall socket. Be sure to have the wall socket and power plug readily accessible.

Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

ContentsFigures and illustrations in this manual are provided for reference only and may differ from the actual product appearance. Parts of the software function changes with the system upgrade.

Accessories List

The following accessories are included with the TV:

The accessories may be different from the list above due to different models, countries/regions, please refer to the actual accessory bag.

Installing the Stand or Wall Mount Bracket

CAUTION

  • Be sure to disconnect the AC power cord before removing a base stand or installing wall mount brackets.
  • The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure.
  • After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.

Installing the Stand

Follow the illustrations and textual instructions below to complete the installation steps:

  1.  Carefully place your TV back down on a flat surface to prevent damage to the TV.
  2. Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.Tip: Make sure to insert the stands according to the ‘L’ and ‘R’ directional marks that are shown on the surface.
  3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.

Installing the Stand or Wall Mount Bracket

Installing the Wall Mount BracketBefore you begin the installation of the wall mount bracket, be sure to do the following things:

  1.  Place the TV in the bottom tray.
  2. One person holds the TV to prevent it from tipping over. Another person removes the screws on the back of the TV, as shown in the picture below.

CAUTIONWhen mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury.

  • Place spacers between the TV and bracket.
  • Make sure the tilt angle between the TV screen and the vertical surface is no more than 15 degrees.
  • Standard dimensions are shown below.
Wall-Mount hole pattern (mm) 600 × 400
Wall-Mount screw size M8

Installing the Stand or Wall Mount Bracket

NOTE

  • The diameter and length of the screws differ depending on the wall mount bracket model.
  • The wall mount bracket is optional, your device may not have a wall mount bracket, please refer to the actual accessories.

TV Front

Item

Description
Remote sensor Receive remote signals from the remote control.Do not put anything near the sensor, as its function may be affected.
Power indicator The light is off when the TV is turned on. The light is white in standby mode.
The Fairfield Google Assistant control button Switch the button to to turn on the Google Assistant.Say “OK Google” to start a conversation.Before using this function, connect the TV to the Internet and sign in to your Google account.

Select among the different input signal sources or put the TV in standby mode, or you can turn on the TV when the TV in standby mode.
Toggle the OK button left and right to adjust the volume.
Toggle the OK button up and down to select the channel.

NOTE

Powering on the TV requires several seconds to load the program. Do not rapidly turn the TV off as it may cause the TV to work abnormally. The far-field Google Assistant and some of its features are only available in selected countries, regions, and languages.

TV Rear

NOTE

  • Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.
  • The TV may not be compatible with all external devices. To check compatibility, please refer to the user manual of the external device.
  • Do not connect external equipment while the TV’s power cord is plugged in. It may cause electric shock.
  • The service jack is not available for you to connect to an external device. It can only be used by our factory for testing purposes.

Making Connections

ANTConnect an outdoor VHF/UHF antenna or cable.

HDMI / AVConnect an HDMI / AV cable from external AV equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of the device according to the table. Please consult your device user manual for instructions.

  •  To select the HDMI / AV Press the INPUT button, when the list of input Sources appears, press the / / < / > buttons to select the source HDMI / AV, then press the OK button to connect.

NOTEIn order to ensure performance and compatibility, new Ultra-High-Speed HDMI Cables are required to enable or on HDMI 3/4.

Video Effect: BETTER (HDMI) Video Effect: GOOD (AV)

Making Connections

HEADPHONEConnect headphones for audio out of the TV.

ATTENTIONExcessive sound pressure from earphones and headphones can cause hearing loss.

NOTEPlease make sure that the headphone you plugin is without microphone function, or it may not be supported.

DIGITAL AUDIO OUTConnect to an external digital audio system. Before connecting a digital audio system to the DIGITAL AUDIO OUT jack, you should decrease the volume of both the TV and the system to avoid that the volume suddenly becomes bigger.eARC/ARC|Connect an HDMI cable from an external digital audio system.eARC/ARC enables the TV to directly output the digital sound through an HDMI cable. Please note that it works only when the TV is connected to the audio receiver that supports the eARC/ARC (Audio Return Channel) function. When this port is used as the eARC/ARC function, it can’t be used as signal input at the same time.

Making Connections

USBConnect the USB1.1 and USB2.0 devices such as hard drives, USB sticks and digital cameras for browsing photos, listening to music, and watching movies.

NOTE

  • When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. If a USB 1.1 or USB2.0 device requires more than 500mA or 5V, the USB device may not be supported. Max supported current for USB 3.0 device is 1A (only for some models). Exceeding the max supported current may result in damage or data loss.
  • Certain digital cameras may not be compatible with the TV.

LAN (Wired setup)Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.

  •  We recommend you to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have DHCP.

Wireless setupConnect your TV to your wireless network, you need a wireless router or modem. See the illustration below.

  •  The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac communication protocols.

NOTE

  • You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support an external USB network adapter.
  • If the wireless router supports DHCP, your TV can connect more easily to the wireless network.
  • If you apply a security system that is not listed below, it will not work with the TV.Security system : WPA, WEP, WPA2.
  • In order to guarantee a smooth network, the distance between the router and TV should be less than 10 meters.

Remote Control

Remote Control

Pairing the Remote Control (only for Bluetooth remote control)

  1.  Pair the remote to the TV after you power it on. Keep the remote control within 3 meters from the TV. Press and hold the button at least 3 seconds to start pairing.
  2. If the remote is paired successfully then a confirmation will display on the screen. If it did not pair successfully then an ‘unsuccessful’ message will display. Repeat step 1.

NOTE

  • If an unknown error occurred with the remote then it could have been caused by interference. Try to remove what’s causing the interference and pair it again.
  • If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries, press any key for 1~2 seconds, and insert them back. then the remote control will work normally.
  • The remote cannot be paired to the TV while the TV is in standby mode.

Using the Google AssistantYou can ask for information, search for your favorite movies, control your TV and more, just by asking Google Assistant. Before using this function, pair the remote control to the TV and connect the TV to the Internet.

Set up your Google Assistant

  1. On your remote control, press the Assistant button.
  2. On your TV screen, an introduction will appear. Follow the steps to finish the setup.

Talk to your Google Assistant 

  1. Press the button on your remote control, the blue light on the remote control lights up, and the microphone is active.
  2. Say a command immediately, such as saying “What can you do?”. Search results will be displayed at the bottom of the screen.

NOTE

  • This function is available for remote controls that have a button.
  • Some functions may not be supported if you are not signed in to your Google account.
  • The Google Assistant function only supports some languages, and the supported functions may differ depending on countries/regions.
  • You can download and install the Google Assistant app on your mobile device to use your voice.

Remote Control

Installing Batteries in the Remote Control

  1. Press the switch and the battery case will pop up automatically.
  2. Insert two AAA size batteries. Make sure to match the (+) and ( – ) ends of the batteries with the (+) and ( – ) ends indicated in the battery compartment.
  3.  Push the battery case back to the remote control.

NOTE

  • Product image is only for reference, actual product may vary in appearance.
  • Dispose of your batteries in a designated disposal area.
  • Do not throw the batteries into fire.
  • Do not mix battery types or combine used batteries with new ones.
  • Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
  • If you do not intend to use the remote control for a long time, remove the batteries.
  • Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

Remote Control

Remote Control Operation Range

  1. The remote control can work at a distance of up to 8 meters in front of the TV set.
  2. The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ±30°, while the vertical angle is within ±15°.
  3. The operating distance may vary depending on the brightness of the room.

Disposal of this unitProduct should not be damaged, dismantled or thrown in municipal waste. It should be packed and handed over to the authorized recycler.

Turning the TV on for the First TimeConnect the mains cable to the mains socket after you have completed all the connections. The first time you turn the TV on, it will go straight to the Installation Guide. The guide set is completed according to the boot navigation prompt. The navigation information is specific to the actual condition. The Home screen will be your starting point for navigating the TV.

Specifications

Features, appearance and specifications are subject to change without notice. If you encounter difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual or the E-manual.

Item

75″
Dimension (mm) Without Stand(W × H × D) 1676 × 990 × 76
With Stand(W × H × D) 1676 × 1088 × 424
Weight (kg) Without Stand 37.0
With Stand 38.2
Active Screen Size (Diagonal) (cm) 189
Screen resolution 7680 × 4320
Audio power 15W + 15W
Power consumption Please refer to the rating label.
Power supply 100 – 240V  50/60Hz
Standby Power 0.5W
Receiving systems Analog PAL-D/K, B/G, I  SECAM-D/K, B/G
Digital DVB-T/T2, DVB-C
Environmental conditions Temperature: 5°C – 45°CHumidity: 20% – 80% RHAtmospheric pressure: 86 kPa – 106 kPa
HDMI Input 60Hz (640×480, 800×600, 1024×768)

60Hz (480 I, 480 P, 720 P, 1080 I, 1080 P)

50Hz (576 I, 576 P, 720 P, 1080 I, 1080 P)

24Hz 25Hz 30Hz 50Hz 60Hz (3840×2160)

,

24Hz 25Hz 30Hz 50Hz 60Hz (7680×4320 HDMI3,4)

3840×, 3840× (HDMI3,4)

Other Information

What is Freeview Plus?Freeview Plus is a new television service delivered via broadband providing a state-of-the-art Electronic Program Guide (EPG) and seamless access to catch-up TV across the free-to-air networks with the simple press of a button.

How does it work?First, ensure the TV is connected to the internet and an antenna system. Then when you’re watching TV, you’ll briefly see a prompt at the top left of the screen. Press the `Green’ button on your remote to launch Freeview Plus. More information about Freeview Plus can be found on http://www.freeview.com.au/

 

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2020 Dolby Laboratories. All rights reserved.

report this ad

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS, and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,