HOMEDEPOT DIS-46201 Weyburn 4 Light Chandelier User Guide

HOMEDEPOT DIS-46201 Weyburn 4 Light Chandelier

Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460


THANK YOUWe appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

  • Consult a qualified electrician if you have any electrical questions.
  • CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at1-800-986-3460.
  • WARNING: Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.


The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of two (2) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifica-tions, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-800-986-3460 or visit



  • Read all instructions before installation.
  • To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
  • Keep your receipt and these instructions for proof of purchase.



NOTE: Hardware not shown to actual size.

Part Description Quantity
AA Mounting unit 1
BB Mounting screw 2
CC Wire nut 3


Part Description Quantity
A Light fixture 1
B Chain (w/ quick connector) 1
C Canopy 1
D Loop 1


Assembling the light fixture

  • Screw the loop (D) to the top of the light Fxture (A).
  • Secure the chain (B) to the loop (D) on the light fixture (A).

Attaching the mounting unit and canopy to the junction box

  • Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB) and remove the pre-installed screw collar ring.
  • Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Turn the screw collar ring until 1/2 of the screw collar loop threads are exposed.
  • Secure the chain (B) to the screw collar loop on the mount-ing unit (AA). Lower the screw collar ring and canopy (C) over the chain (B).
  • Weave the electrical wires, ground wires and safety cable through the chain (B), screw collar loop, canopy (C) and through the center of the mounting unit (AA).

Making the electrical connections 

  • Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the preinstalled ground screw.
  • Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (CC) and secure with electrical tape (not included).

NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.

Securing the light fixture

  • Secure the canopy (C) to the mounting unit (AA) with the screw collar ring.

Installing the light bulbs

  • Install four E12 candelabra 60-watt bulbs (not included).


Turning the light on

  • Turn the light switch on to activate the fixture.

Care and Cleaning

  • Clean the lamp with a soft, dry cloth.
  • Do not use any cleaners with chemicals, solvents, or harsh abrasives.


Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800 986-HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.


[xyz-ips snippet=”download-snippet”]