CareOne Automatic Blood Pressure Monitor AHBPA-060

AutomaticBlood Pressure Monitor

LIMITED LIFETIME WARRANTY

HoMedics sells its products with the intent that they are free of defects in manufacture and workmanshipfor the life of the original purchaser from the date of original purchase, except as noted below. HoMedicswarrants that its products will be free of defects in material and workmanship under normal use andservice. This warranty extends only to consumers and does not extend to Retailers.To obtain warranty service on your HoMedics product, mail the product and your dated sales receipt (asproof of purchase), postpaid, to the following address:HoMedics Consumer RelationsService Center Dept. 1683000 Pontiac TrailCommerce Township, MI 48390No COD’s will be accepted.HoMedics does not authorize anyone, including, but not limited to, Retailers, the subsequent consumerpurchaser of the product from a Retailer or remote purchasers, to obligate HoMedics in any way beyond theterms set forth herein.This warranty does not cover damage caused by misuse or abuse; accident; the attachment of anyunauthorized accessory; alteration to the product; improper installation; unauthorized repairs ormodifications; improper use of electrical/power supply; loss of power; dropped product; malfunctionor damage of an operating part from failure to provide manufacturer’s recommended maintenance;transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use during theperiod the product is at a repair facility or otherwise awaiting parts or repair; or any other conditionswhatsoever that are beyond the control of HoMedics.This warranty is effective only if the product is purchased and operated in the country in which the productis purchased. A product that requires modifications or adoption to enable it to operate in any other countrythan the country for which it was designed, manufactured, approved and/or authorized, or repair of productsdamaged by these modifications is not covered under this warranty.THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE SHALLBE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OFMERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITHRESPECT TO PRODUCTS COVERED BY THIS WARRANTY. HOMEDICS SHALL HAVE NO LIABILITY FORANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTYREQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUNDTO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. NO REFUNDS WILL BE GIVEN.IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, HOMEDICS RESERVESTHE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR REPLACEMENT.This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealedproducts, including but not limited to sale of such products on Internet auction sites and/or sales of suchproducts by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease andterminate as to any products or parts thereof which are repaired, replaced, altered, or modified, without theprior express and written consent of HoMedics.This warranty provides you with specific legal rights. You may have additional rights which may vary fromcountry to country. Because of individual country regulations, some of the above limitations and exclusionsmay not apply to you.For more information regarding our product line in the USA, please visit: www.homedics.com

IMPORTANT PRODUCT NOTICES AND SAFETYINSTRUCTIONS

When using your blood pressure monitor, basic precautionsshould always be followed. Please read and follow allinstructions and warnings before using this product.Save these instructions for future reference.

  • Please note that this is a home healthcare product onlyand it is not intended to serve as a substitute for theadvice of a physician or medical professional.
  • Do not use this device for diagnosis or treatment of anyhealth problem or disease. Measurement results are forreference only. Consult a healthcare professional forinterpretation of pressure measurements. Contact yourphysician if you have or suspect any medical problem.Do not change your medications without the advice ofyour physician or healthcare professional.
  • Proper cuff size is critical for accurate measurements.Follow the instructions in this manual and printed onthe arm cuff to ensure the appropriate size of cuff isbeing used.
  • This product is not suitable for people with arrythmias. Thisdevice may have difficulty determining the proper bloodpressure for individuals with diabetes, poorcirculation of blood, kidney problems or for users whohave suffered from a stroke.
  • The pulse display is not suitable for checking thefrequency of heart pacemakers.
  • Electromagnetic interference: The device containssensitive electronic components. Avoid strong electricalor electromagnetic fields in the direct vicinity of the device(e.g. mobile telephones, microwave ovens). These maylead to temporary impairment of measurement accuracy.
  • Use blood pressure monitor only for its intended use.
  • Do not wrap the cuff around body parts other thanyour arm.
  • This unit is intended for use in measuring the blood pressureand pulse rate of adults. Do not use this device on infants orthose who cannot express their own consent. This unit shouldnot be operated by children.
  • Do not plug or unplug the adapter power cord withwet hands.
  • Please use only a 6V AC adapter (as specified in thismanual) or 1.5V AAA alkaline batteries for power supply.

Blood pressure measurements determined with this deviceare equivalent to those obtained by a trained observer usingthe cuff/stethoscope ausculatory method, within the limitsprescribed by the American National Standard, Manual,electronic, or automated sphygmomanometers.

ABOUT BLOOD PRESSUREWhat is Blood Pressure?Blood pressure is the pressure exerted on the arterywalls while blood flows through the arteries. Thepressure measured when the heart contracts andsends blood out of the heart is systolic (highest)blood pressure. The pressure measured when theheart dilates with blood flowing back into the heartis called diastolic (lowest) blood pressure.

Why Measure YourBlood Pressure?Among today’s various health problems, thoseassociated with high blood pressure are very common.High blood pressure dangerously correlates withcardiovascular diseases. Therefore, blood pressuremonitoring is important for identifying those at risk.

BLOOD PRESSURE STANDARDThe U.S. Department of Health and Human Servicesand the National Institutes of Health have developeda blood pressure standard that identifies areas of lowandhigh-risk blood pressure. This standard, however,is a general guideline as an individual’s blood pressurevaries among different people, age groups, etc.

Categories for Blood Pressure Levels in Adults

For adults 18 and older who are not on medicine for high bloodpressure, are not having a short-term serious illness, and do nothave other conditions, such as diabetes and kidney disease.To determine category of risk when systolic and diastolic readings fallinto two areas, use the higher of the two numbers for classification.There is an exception to the above definition of high bloodpressure for people with diabetes and chronic kidney disease.A blood pressure of 130/80 mmHg or higher is considered highblood pressure for those individuals.

This monitor comes equipped with a Risk CategoryIndicator to visually indicate the assumed risk level ofeach reading based upon these standards. See page20 for more information on this feature.It is important that you consult with your physicianregularly. Your physician will tell you your normalblood pressure range as well as the point at whichyou will be considered at risk.For reliable monitoring and reference of blood pressure,keeping long-term records is recommended.

HOW THIS BLOOD PRESSUREMONITOR WORKS

This monitor uses Smart Measure™ Technology to detect your blood pressure. With one touch of a button,the cuff will automatically inflate to block the bloodflow through your artery. Next, the deflation processstarts. Smart Measure™ Technology enables the monitorto automatically inflate and deflate to the appropriatelevel for each individual. Please note that any musclemovement during inflation or deflation will causemeasurement error. When measurement is complete,the monitor will display your systolic pressure, diastolicpressure, and pulse readings.Based upon your measurement results, the monitor’sRisk Category Indicator will alert you if your readingfalls into the pre-hypertension, stage 1 hypertension, orstage 2 hypertension categories. See page 20 for moreinformation on the Risk Category Indicator.

DISPLAY EXPLANATIONS

Display Symbols:

If Error and any of the following letters and numbers appear in thearea that systolic pressure should be displayed, an error has occurredwith your reading. See Troubleshooting section of this manual formore information.

INSTALLING BATTERIES

  1. Press down on latch and lift the battery covertowards you to open the battery compartment.
  2. Install or replace 4 “AAA” sized batteries in thebattery compartment according to the indicationsinside the compartment.
  3. Replace the battery cover by clicking in thebottom hooks first, then push in the top end ofthe battery door.

Replace the batteries if:1. The weak battery symbol appears on the display.2. Nothing appears on the display when the power isswitched on.As the supplied batteries are for test only, they maybe discharged earlier than batteries you buy in stores.Replace the batteries in pairs. Use only 1.5V AAAalkaline batteries. Remove batteries when unit is notin use for extended periods of time.

Note: Batteries are hazardous waste. Do not disposeof them together with the household garbage.

USING THE AC ADAPTER (NOT INCLUDED)This monitor is designed for operation with batteries oran optional AC adapter. Please use only a compatible,UL approved AC adapter with required voltage andcurrent as indicated in this manual. Contact HoMedicsConsumer Relations at 1-800-466-3342 to purchase acompatible AC adapter.Note:

  • Please unload the batteries when operatingwith an AC adapter for an extended period oftime. Leaving the batteries in the compartmentfor a long time may cause leakage,which may lead to damage of the unit.
  • No batteries are needed when operating withan AC adapter.

Connect the AC adapter with the AC adapter jack inthe back of the unit as shown below.

DATE & TIME SET PROCEDURE

  1. To adjust the date/time, press the Set button .
  2. The display will show a blinking number showingthe month. Change the month by pressing thebutton. Each press will increase the number by onein a cycling manner. Press the Set button againto confirm the entry, and the screen will show a blinkingnumber representing the day of the month.
  3. Change the date and time as described in Step 2above, using the button to change the numbersand the Set button to confirm the entries.

USING THE ARM CUFFVery Important: Proper cuff size is critical to accuratemeasurement.This monitor comes with two sizes of arm cuffs:Standard Size Fits 9″–13″ (23 cm – 33 cm)Large Size Fits 13″–17″ (33 cm – 43 cm)The appropriate cuff is suitable for your use if thecolored arrow falls within the solid color line asshown below.

  1. If the cuff is not assembled, pass the end of thecuff furthest away from the tubing through the metalD-ring in order to form a loop. The smooth sidewithout the felt material should be on the inside of the cuff loop.
  2. Plug the cuff tube into the left side of the unit.
  3. Open the arm cuff so that your arm may beplaced through it.
  4. Remove tight fitting clothing from aroundyour upper left arm.
  5. Position cuff edge 0.8-1.2    inches (2-3cm) above elbow.
  6. Center tube over middle of arm.
  7. Pull the end of the cuff so that it tightensevenly around your arm. Press the hookand loop material together to secure.Allow room for 2 fingers to fit between thecuff and your arm.
  8. Lay your arm on a table (palmupward) so the cuff is at the sameheight as your heart. Make sure thetube is not kinked.

Note:If it is not possible to fit the cuff to your left arm, itcan also be placed on your right arm. However, allmeasurements should be made using the same arm.To use on the right arm, you must position the arterysymbol “ ” over the main artery. Locate the mainartery by pressing with two fingers approximately 1″(2 cm) above the bendof your elbow on theinside of your right arm.Identify where the pulsecan be felt the strongest.This is your main artery.

MEASUREMENT PROCEDUREImportant Notes:

  • Blood pressure changes with every heartbeat and isin constant fluctuation throughout the day.
  • Blood pressure measurement can be affected by theposition of the user, his or her physiologic conditionand other factors. For greatest accuracy, wait 1hour after exercising, bathing, eating, drinkingbeverages with alcohol or caffeine, or smokingto measure blood pressure.
  • Before measurement, it is suggested that you sitquietly for 15 minutes as measurements takenduring a relaxed state will have greater accuracy.
  • You should not be physically tired or exhaustedwhile taking a measurement.
  • During the measurement, do not talk or moveyour arm or hand muscles.
  • See page 22 for additional notes regarding yourblood pressure measurement.

If you are using this blood pressure monitor for the firsttime, please remove the protective film from the screen.

  1. Press the User Select Button to choose User 1or User 2.After the user number is selected, press theSTART/STOP button to confirm the chosen user.
  2. With the cuff wrapped around your arm, press theSTART/STOP button. Do not inflate the cuff unlessit is wrapped around your arm. All digits will lightup to check the display functions. The checkingprocedure will be completed after about 3 seconds.
  3. After all symbols disappear, the display willshow “00”. The monitor is “Ready to Measure”and will automatically inflate thecuff to start measurement.
  4. Once your systolic pressure is determined, the monitorwill begin deflating to measure your diastolic pressure. Note: This monitor will re-inflate automatically if thesystem detects that your body requires morepressure for measurement.
  5. When the measurement is  completed, the cuff will deflateentirely. Systolic pressure, diastolicpressure and pulse will be shownsimultaneously on the LCD screen.The measurement is thenautomatically stored intomemory.

Note:

  1. This monitor automatically turns off approximately 1minute after last operation. You may also press theSTART/STOP button to turn the unit off.
  2. To interrupt the measurement, you may press theSTART/STOP (recommended), “MEM,” User-Select or Date & Time Set ( ) buttons. The cuffwill deflate immediately after a button is pressed.

RISK CATEGORY INDICATORThe U.S. Department of Health and HumanServices and the National Institutes of Health havedeveloped a blood pressure standard classifyingblood pressure ranges into 4 stages. This unit isequipped with an innovative blood pressure classificationindicator, which visually indicates the assumedrisk level (normal, prehypertension, stage 1 hypertension,or stage 2 hypertension) of each reading.Symbols are described below and classifications followthe guidelines as described earlier in this manual(page 5).

RECALLING VALUES FROM MEMORYThis monitor can be used by two individuals.Each user can store up to 50 measurements.

  1. Press the User-Select button.   
  2. Choose User 1 or User 2.
  3. Press the “MEM” button toaccess the memory.
  4.  The monitor will first displaythe calculated average appliedto the last 3 memories.
  5. Every new press of the“MEM” button will recall aprevious reading. The latestreading will be recalled first.

CLEARING VALUES FROM MEMORY

  1. Press the User-Select button to select User 1 orUser 2.
  2. Press and hold the Date & Time set buttons( ) at the same time while in memoryrecall mode, and the data for the selected userwill be erased automatically

STOPRECALLING VALUES FROM MEMORYThis monitor can be used by two individuals.Each user can store up to 50 measurements.CLEARING VALUES FROM MEMORY1. Press the User-Select button to select User 1 orUser 2.2. Press and hold the Date & Time set buttons( ) at the same time while in memoryrecall mode, and the data for the selected userwill be erased automatically.IMPORTANT NOTES REGARDING YOUR BLOODPRESSURE MEASUREMENT

  • Take your reading in a comfortable environmentas measurements can be affected by hot or coldtemperatures. Take your blood pressure at normalbody temperature.
  • Do not move or talk during measurement as thiscan elevate readings.
  • Do not move or cross legs during measurement.Keep feet flat on floor.
  • Do not touch cuff or monitor during measurementprocedure.
  • It is suggested that you take your measurementsat the same time each day and use the same armfor consistency.
  • Users should wait a minimum of 5 minutes beforetaking additional measurements. More time maybe necessary depending upon your physiology.
  • The measurement results that users receiveare for reference only. If users have any bloodpressure concerns, please consult a physician.
  • Once inflation reaches 300 mmHg, the unit willdeflate automatically for safety reasons.
  • This product is not suitable for peoplewith arrhythmias.
  • This device may have difficulty determining theproper blood pressure for users with diabetes,poor circulation of blood, kidney problems, orfor users who have suffered a stroke.

CARE, MAINTENANCE & CLEANING

  1. Clean the blood pressure monitor body and cuffcarefully with a slightly damp, soft cloth. Do notpress. Do not wash cuff or use chemical cleaner onit. Never use thinner, alcohol or petrol (gasoline) ascleaner.
  2. Leaky batteries can damage the unit. Remove thebatteries when the unit will not be used fora long time.
  3. If the unit is stored near freezing, allow it toacclimate to room temperature before use.
  4. This blood pressure monitor is not field service-able.You should not use any tool to open the device norshould you attempt to adjust anything inside thedevice. If you have any problems with this device,please contact HoMedics Consumer Relations (contactinformation can be found on the warranty page).
  5. Do not immerse the unit in water as this will result indamage to the unit.
  6. Do not subject the monitor and cuff to extreme temperatures,humidity, moisture, and direct sunlight.Protect from dust.
  7. Do not fold the cuff and tubing tightly.
  8. Do not disassemble the monitor or cuff. If in need ofrepair, refer to the warranty section of this manual.
  9.  Do not subject the monitor to extreme shocks (do notdrop on floor).
  10. Do not inflate the cuff unless wrapped around arm.
  11. Do not wrap the cuff around body parts otherthan your arm.
  12. Do not drop or insert any object into any openingor hose.
  13. This monitor may not meet its performancespecifications if stored or used outside of thesetemperature and humidity ranges:• Storage Environment • OperatingEnvironmentTemperature:50°F~104°F (10°C ~40°C)Humidity:less than 85% RH

POTENTIAL FORELECTROMAGNETIC INTERFERENCE

To avoid inaccurate results caused byelectromagnetic interference betweenelectrical and electronic equipments,do not use the device near a cellphone or microwave oven.

TROUBLESHOOTINGIf any abnormality arises during use, please check the following points

Note: If the unit still does not work, contact HoMedics Consumer Relations.Under no circumstance should you disassemble or attempt to repairthe unit by yourself. Contact information for HoMedics ConsumerRelations Department can be found on the warranty page.

SPECIFICATIONS

Note: These specifications are subject to change without notice.

 

 

Read More About This Manual & Download PDF:

 

CareOne Automatic Blood Pressure Monitor AHBPA-060 – CareOne Automatic Blood Pressure Monitor AHBPA-060 –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,