Homedics Body Bubbles Massaging Bubble Mat Instruction Manual BA-M200

Body Bubbles

Massaging Bubble Mat

Instruction Manual

IMPORTANT SAFEGUARDS

WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING

DANGER – TO REDUCE THE RISK OF ELECTRIC SHOCK:

  • Control unit should never be placed in water.
  • Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
  • Do not reach for an appliance that has fallen into water. Unplug it immediately.
  • Do not place or store power unit where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. Store in dry place.

DANGER – RISK OF ACCIDENTAL DROWNING:

  • Extreme caution must be exercised to prevent unauthorized access by children to avoid accidents, ensure that children cannot use this spa unless they are supervised at all times.

DANGER – RISK OF INJURY:

  • The suction fittings in this spa are sized to match the specific water flow created by the pump. Should the need arise to replace the suction fittings or the pump, be sure that the flow rates are compatible. Never operate spa if the suc tion fittings are broken or missing. Never replace a suction fitting with one rated less than the flow rate marked on the original suction fitting.
  • Install at least 5 feet (1.5m) from all metal surfaces. As an alternative, spa may be installed within 5 feet of metal surfaces if each metal surface is permanently connected by a minimum 8 AWG (8.4mm2) solid copper conductor to the wire connector on the terminal box that is provided for this purpose.
  • Do not permit any electric appliance, such as a light, telephone, radio, or television, within 5 feet (1.5m) of a spa.

WARNING – TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS:

  • An appliance should never be left unattended when plugged in. Unplug from outlet when not in use and before putting on or taking off parts or attachments.
  • Close supervision is necessary when this product is used by, on or near children, invalids or disabled persons.
  • Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by HoMedics.
  • Do not operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged or dropped into water. Return it to HoMedics Service Center for examination and repair.
  • Do not carry this appliance or power unit by supply cord, or use cord as a handle.
  • Keep cord away from heated surfaces.
  • Do not block the air openings of the appliance or power unit or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep air openings free of lint, hair, dust, etc.
  • Do not drop or insert any object into any opening.
  • Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
  • To disconnect, turn all controls to the “off” position, then remove plug from outlet.
  • To reduce risk of injury, do not permit children to use this product unless they are closely supervised at all times.

Caution: Do not allow the control unit to become wet. Only mat and hose should come in contact with water.

Please disconnect the mat and hose after use.

The suction cups under the bath mat are to be used on smooth and shiny bathtub surfaces. If your bathtub has a rough or textured surface, take extreme caution when entering the tub in order to avoid slippage and possible danger.

WARNING – FOR INDOOR USE ONLY.

  • The water in a spa should never exceed 40C(104F). Water temperature between 38C (100F) and 40C are considered safe for a healthy adult. Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes.
  • Since excessive water temperatures have a high potential for causing fetal damage dur ing the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 38C (100F).
  • Before entering the spa, the user should measure the water temperature since the toler ance of water temperature-regulating devices varies.
  • The use of alcohol, drugs or medication before or during spa use may lead to uncon sciousness with the possibility of drowning.
  • Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa. Persons using medication should consult a physician before using a spa.
  • Persons using medication should consult a physician before using a spa since some medication may induce drowsiness while other medications may affect heart rate, blood pressure, and circulation.

SAVE THESE INSTRUCTIONS

CAUTION—PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING.

  • Ensure that your hands are dry when operating the switch or removing the plug.
  • Do not cover unit or power unit with any type of material while it is in operation.
  • Do not use in inflatable tubs or pools.
  • Not for use by diabetics or individuals with other sensory deficiencies.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Servicing of Double-Insulated Products

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a doubleinsulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED” The symbol “ ” may also be marked on the product.

BodyBubbles Features

  1. Comfortable bubble mat contours to any bath surface.
  2. Variable control to customize from gentle to powerful bubbles.
  3. Lightweight, compact and portable for easy storage.

Installation Instructions

 

  1. Remove the mat from its packaging and make sure all necessary components are included: mat, suction cups, control unit and hose (Fig. 1).
  2. Be sure the control unit is unplugged and positioned on a sturdy surface where it cannot fall or be pulled into the tub, preferably the floor.
  3. To place the mat, first dampen tub surface with a slight amount of water. This will help the adhesion of suction cups (on bottom of mat) to bathtub floor (Fig. 2).
  4. To connect the hose to the control unit, insert the hose end into the control unit (Fig. 3).
  5. Insert the other end of the hose into the mat (Fig. 4). NOTE: Keep the hose free from kinks which could constrict airflow.
  6. Plug unit into 120 volt electrical outlet.

Caution: Mat may move when entering or exiting bathtub. Exercise caution.

Instructions for Use

  1. After plugging in the control unit, turn the dial to your desired bubble intensity.
    1. First position is low intensity
    2. Second position is medium intensity
    3. Third position is high intensity
  2. When you are done with your bath, return the dial to the “off” position and drain the bathtub.

BodyBubbles Care and Maintenance

Keep the BodyBubbles clean and clear of obstructions. Check the intake area frequently for potential obstructions that could block air or water flow, including lint and hair. Never store your BodyBubbles wet.

Storage

  • To remove any remaining water inside the mat, lift mat, keeping the hose attached and hold at an angle so water collects in the corner (Fig. 4). Turn unit on and blow air through the mat for 30-45 seconds. Towel dry outside of mat.
  • After mat is completely dry, you can fold for storage.

Cleaning

  • Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge. NOTE: Do not use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture polish or paint thinner to clean.
  • BodyBubbles mat should be disinfected periodically to keep it free from bacteria. Disinfect with household cleanser once a week if used several times a week. If used less frequently, disinfect after each use.
  • This product is not designed to be used in conjunction with any soaps, gels, shampoos or the like. However, should this occur, follow these next steps to insure the longevity of this product:

  1. Disconnect hose from mat.
  2. Fill mat with fresh water, through hose inlet on mat (Fig. 5).
  3. Empty water. Repeat several times until inside residue is removed.
  4. Rinse outside of mat and sponge off to make sure all residue is removed.
  5. Follow draining instructions, as described under “Storage” section.

Do not attempt to repair BodyBubbles. There are no user serviceable parts. For service, send the unit to the HoMedics address listed in the warranty section.

Caution: All servicing of this BodyBubbles must be performed by authorized HoMedics service personnel only

Homedics Body Bubbles Massaging Bubble Mat Instruction Manual BA-M200 – Homedics Body Bubbles Massaging Bubble Mat Instruction Manual BA-M200 –

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,