HomeSpot HS3-NS001-RB-V2 Bluetooth Audio Transmitter Adapter for Nintendo Switch User Guide

HomeSpot HS3-NS001-RB-V2 Bluetooth Audio Transmitter Adapter for Nintendo Switch User Guide

Package Contents

• HomeSpot HS3 NS002
• User Guide
• USB-C to USB-A Adapter
• Pouch
• Warranty Card

About your HomeSpot HS3 NS002

Setting up your hardware

1. Turn on the NSwitch and go to the Home menu.
2. Insert the HomeSpot HS3 NS002 into the NSwitch USB-C port.
3. LED indictors on the HomeSpot HS3 NS002 will start flashing.
4. HomeSpot HS3 NS002 is ready for pairing and connecting with your headphones once the LEDs have stop flashing.
5. For in-game voice chat, after headphones is paired and connected, press theP1/P2 button to toggle the Internal Mic On/Off. When the Internal Mic is Off,P1/P2 LED is Green. When the Internal Mic is On, P1/P2 LED is Amber.

Connecting to one Bluetooth headphones

1. Upon powering up, HomeSpot HS3 NS002 automatically enters pairing mode on first use.
2. Make sure the Bluetooth headphones is in pairing mode.
3. Keep the headphones close to the HS3 NS002 during initial pairing.
4. Once connected, P1/P2 LED will be Green and headphones will start receiving audio from the NSwitch.

Connecting to two Bluetooth headphones

1. Pair and connect to the first headphones, P1 LED will be Green.
2. Pair the 2nd headphones by pressing the P2 button for 3 seconds.
3. Keep the 2nd headphones close to the HS3 NS002 during initial pairing.
4. Once both headphones are connected, both P1 and P2 LEDs will be Green.
5. Both headphones will start receiving audio from the NSwitch.

Reconnecting to a previously paired headphones

• Automatic re-connectWhen a previously paired headphones is turned on, it will automatically re-connect to the HomeSpot HS3 NS002.
• Manual re-connectYou may also manually initiate a re-connect by pressing either the P1 or P2 button, the corresponding previously paired 1st or 2nd headphones will be re-connected respectively.

In-game Voice Chat 

1. Make sure one or both headphones are paired and connected to the HomeSpot HS3 NS002.
2. Press the P1/P2 button to toggle the Internal Mic On/Off. When Internal Mic is Off, P1/P2 LED is Green. When Internal Mic is On, P1/P2 LED is Amber.

Factory Reset

1. Power on the Nintendo Switch and go to the Home menu.
2. Insert the Bluetooth adapter into the bottom USB-C port on the Switch.
3. Press and hold both P1 and P2 buttons for 5 seconds until all LEDs start flashing.

TV Mode

The HomeSpot HS3 NS002 can also be used with the TV dock. Simply plug the bundled USB-C to USB-A adapter to the USB-A port on the side of the TV dock, then insert the HS3 NS002 into USB-C port on the adapter.

Follow the previous pairing procedures for headphones connection.

LED Indicators

• LED Off
• Colored-line box – LED On 
• Dashed box – LED flashing

Product Specifications

Safety Instructions

• Do not use this device in medical facilities, aircraft, refueling points, close to automatic doors, automatic fire alarms or other remotely controlled devices.
• Keep this device at least 20 cm from pacemakers and other medical devices as Bluetooth signal may interfere with their operation.