Honeywell Home MT4/MT8 Small linear thermoelectric Actuators User Manual

MT4/MT8 Small linear thermoelectric Actuators

EN0H-0490GE23 R0421

Actuators

MT4/MT8Small linear thermoelectric Actuators

APPLICATION

Small linear actuators are used in room and zone applications for time-controlled two-point and pulse-width modulated (PWM*) regulation of heating and cooling systems such as fan coil units, radiators, floor heating systems, chilled ceilings, and convectors.

  • Fit on standard M30 x 1.5 heating/cooling valves, thermostatic radiator valves, and valve inserts for manifolds and compact radiators · Fit to standard closing dimensions (11.5 mm ± 0.3 mm)
  • Special valve adapters on request*Recommended controllers: Excel 10 and Excel 12 controllers (use with other, non-Honeywell Home controllers may adversely influence PWM-operation).

APPROVALS

  • CE
  • UKCA

SPECIAL FEATURES

  • No mounting tools required (easily mounted using valve adapter)
  • Water-protected housing design in all mounting positions
  • Pluggable cable for easy installation and servicing
  • Auxiliary switch models for driving pumps or fans
  • Normally-open and normally-closed models
  • Compact design allows installation in limited space
  • Visual indicator showing valve position and type of action (NO or NC)
  • Noiseless operation
  • Reliable long-term operation
  • Overload protection (4 kV) for 230 V models
TECHNICAL DATA

Operating temperatures

Max. medium temperature:

120 °C

Specifications

Maximum stroke:

MT4: 4 mm

MT8: 8 mm

Power supply:

MTx-024: 24 V AC/DC ± 20 % MTx-230: 230 V AC +10 % … -15 %

Stem force:

90 N

Open/closing time:

dependent on ambient temperature (see section “Electrical specifications”)

Protection standard:

IP44 in all mounting positions

Cable length:

1 m, other cable lengths upon  request

Cable wires:

MTx-xxx: 2 x 0.5 mm2MTx-xxxS: 4 x 0.35 mm2

Max. permissible auxiliaryswitch current:

MTx-xxxS: 5 (3) A

End position:

MT4: 14.0 mmMT8: 18.0 mm

METHOD OF OPERATION

When the operating current is applied, a PTC resistor heats up a wax element. After a delay, this wax element expands, causing stroke movement.

TRANSPORTATION AND STORAGE

Keep parts in their original packaging and unpack them shortly before use.The following parameters apply during transportation and storage:

Parameter

Value

Environment:

clean, dry and dust free

Min. ambient temperature:

20 °C

Max. ambient temperature:

50 °C

Max. ambient relative  

humidity:

95 % *

INSTALLATION GUIDELINESMounting and dismounting

Position Indicator

The position indicator (the red indicator behind the window on the face of the actuator) shows the model’s type of action (NO or NC) as well as the current stroke position.

Wiring

Opening and Closing Time

Note: Connection leads must not touch piping (heat transfer).

Note: Opening and closing times depend upon ambient temperature and model.

Product Specification Sheet · EN0H-0490GE23 R0421 · Subject to change

MT4/MT8 – Small linear thermoelectric Actuators

TECHNICAL CHARACTERISTICSElectrical specifications

Initial current*

Permanent current*

Power consumption*

Ø Runtime for full nominal valve stroke*

OS.-No.

(valve stroke: 2.5 mm) MT4

(valve stroke: 6.5 mm) MT8

~0.2 A**

< 0.1 A

< 2 VA

4.0 min

6.0 min

MTx-024-xx,  

MTx-024S-xx

~0.4 A**

< 0.01 A

< 2 VA

4.0 min

6.5 min

MTx-230-xx,  

MTx-230S-xx

* All values at nominal voltage 24 V AC/DC, 230 V AC, 50 Hz.**Average during first 500 m sec.

Valve Action with “Typical” Valves

Valve Action with VSxx Valves

OS.-No.MTx-024-xx, MTx-024S-xx MTx-230-xx, MTx-230S-xx

Normally open: 2-way valve, A-B open without power; Normally closed: 2-way valve, A-B shut without power;

Note: This figure is a schematic diagram showing typical valve action. Actual function can vary depending upon the individual type of valve.

Product Specification Sheet
  • EN0H-0490GE23 R0421
  • Subject to change

MT4/MT8 – Small linear thermoelectric Actuators

DIMENSIONS

Overview

Parameter

MT4-xxx

MT8-xxx

Dimensions:

H

59

67

L

45

45

W

42

42

X

6

6

Note: All dimensions in mm unless stated otherwise.

MT4-xxx 59 45 42 6

MT8-xxx 67 45 42 6

ORDERING INFORMATION

The following tables contain all the information you need to make an order of an item of your choice. When ordering, please always state the type, the ordering or the part number.

Options

Action*

Additional features

Voltage

Max. stroke

OS.-No.

Normally closed

24 V AC/DC

4 mm

MT4-024-NC

Normally open

MT4-024-NO

Normally closed

2.5 m cable length

MT4-024-NC-2.5M

Normally open

2.5 m cable length

MT4-024-NO-2.5M

Normally closed

with auxiliary switch

MT4-024S-NC

Normally open

with auxiliary switch

MT4-024S-NO

Normally closed

230 V AC/DC

MT4-230-NC

Normally open

MT4-230-NO

Normally closed

2.5 m cable length

MT4-230-NC-2.5M

Normally open

2.5 m cable length

MT4-230-NO-2.5M

Normally closed

with auxiliary switch

MT4-230S-NC

Normally open

with auxiliary switch

MT4-230S-NO

Normally closed

24 V AC/DC

8 mm

MT8-024-NC

Normally open

MT8-024-NO

Normally closed

2.5 m cable length

MT8-024-NC-2.5M

Normally open

2.5 m cable length

MT8-024-NO-2.5M

Normally closed

with auxiliary switch

MT8-024S-NC

Normally open

with auxiliary switch

MT8-024S-NO

Normally closed

230 V AC/DC

MT8-230-NC

Normally open

MT8-230-NO

Normally closed

2.5 m cable length

MT8-230-NC-2.5M

Normally open

2.5 m cable length

MT8-230-NO-2.5M

Normally closed

with auxiliary switch

MT8-230S-NC

Normally open

with auxiliary switch

MT8-230S-NO

*Without power, in combination with standard 2-way valve; “normally closed” = stem extends, “normally open” = stem retracts

Accessories

Description

Dimension

Part No.

MT-CLIP

Mounting Clip

10 units

MT-CLIP

MT-ADAPT-HW

Mounting adapter

10 units

M30 x 1.5

MT-ADAPT-HW

MT-ADAPT-HP

Mounting adapter for Herz/Polytherm valves

10 units

MT-ADAPT-HP

MT-CABLE

Cable (only for actuators without auxiliary switch)

Suitable for MT4-024/-230 and  

MT8-024/-230, 10 units

MT-CABLE-1.5M

MT-CABLE-2.5M

MT-CABLE-5M

MT-CABLE-10M

EVA1-DANFOSS

Danfoss adapter set

RA/RAV/RAVL, 10 units

M30 x 1.5

EVA1-DANFOSS

HCA1VEL

Mounting adapter for Velta compact manifold

HCA1VEL

R453HY002

Mounting adapter for Giacomini manifold

R453HY002

For more information homecomfort.resideo.com/europe

Ademco 1 GmbH Hardhofweg 40 74821 MOSBACH GERMANY Phone: +49 6261 810 Fax: +49 6261 81309

Manufactured for and on behalf of the Pittway Sàrl, La Pièce 4, 1180 Rolle, Switzerland by its Authorised Representative Ademco 1 GmbHEN0H-0490GE25 R0421Subject to change© 2021 Pittway Sàrl. All rights reserved. This document contains proprietary information of Pittway Sàrl and its affiliated companies and is protected by copyright and other international laws. Reproduction or improper use without specific written authorisation of Pittway Sàrl is strictly forbidden. The Honeywell Home trademark is used under license from Honeywell International Inc.

References

[xyz-ips snippet=”download-snippet”]