Honeywell 8403-092 T6 Pro WiFi Lyric T6 Pro Wi-Fi ProgrammableThermostat User Manual

Honeywell 8403-092 T6 Pro WiFi Lyric T6 Pro Wi-Fi Programmable Thermostat

Get connected in 3 simple steps

Step 1Press and hold the center temperature (indoor temperature) on your thermostat for 5 seconds until the screen changes.

Step 2Download the Honeywell Lyric app from the App store or Google play.

Step 3

Open the Honeywell Lyric app. Your thermostat should appear under Thermostat Found. Tap SET UP NOW as shown here to continue. If your thermostat doesn’t appear, tap INSTALL A DEVICE and follow the prompts to continue. The app will walk you through the rest of the setup.

How to use your thermostat

Apple® HomeKit™ Setup CodeThe Lyric T6 Pro Wi-Fi supports Apple Home Kit. When prompted by the Lyric app, scan the code on the last page (back cover) of this guide.Regulatory informationFCC REGULATIONS§ 15.19 (a)(3)This device complies with part 15of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

IC REGULATIONS RSS-GENThis device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:

  1. This device may not cause interference; and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.FCC Warning (Part 15.21) (USA only)Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Automation and Control SolutionsHoneywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422® U.S. Registered Trademark.© 2016 Honeywell International Inc. 33-00152EFS—03 M.S. Rev. 08-16Printed in U.S.A.

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by