Honeywell Micro Pressure Board Mount Pressure Sensors User Guide
MicroPressure Board Mount Pressure Sensors, MPR Series
The MicroPressure MPR Series sensors from Honeywell show that big things can come in small packages. Although only 5 mm x 5 mm, the MPR offers multiple options and features that could fit a
FIGURE 1. PRODUCT NOMENCLATURE FOR APPLICATIONS ABOVE 250,000 UNITS PER YEAR
Pressure Range, Unit and Reference
MPR Series Sensor Mounted on a Breakout Board
Breakout boards, designed for use with the Honeywell SEK002 Sensor Evaluation Kit, are available with the sensor already mounted. Order using the catalog listings in the table below.
WARNINGPERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION · The information presented in this document is for reference only. Do not use this document as a product installation guide. · Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.
Features
- ±40 mbar to ±2.5 bar | ±4 kPa to ±250 kPa | ±0.6 psi to ±30 psi
- 5 mm x 5 mm [0.20 in x 0.20 in] package footprint
- Calibrated and compensated
- IoT (Internet of Things) ready interface
- Low power consumption (<10 mW typ.), energy efficient
- Stainless steel port
- Gel option
- Media compatibility
- Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1
- REACH & RoHS
Applications
- Fluid/liquid media system management
- Gas/air pressure measurement
- Liquid level sensing
- Filter monitors
FIGURE 2. PAD FUNCTIONS
Honeywell Advanced Sensing Technologies830 East Arapaho Road Richardson, TX 75081sps.honeywell.com/ast
008318-4-EN | 4 | 05/21 © 2021 Honeywell International Inc.
References
[xyz-ips snippet=”download-snippet”]